[PATCH 1/5] arm64: dts: imx8mp: Do not delete PHY nodes on i.MX8MP DHCOM PDK2

[Marek Vasut]

The PHY nodes may be activated via DTO in case another SoM variant
is populated into the development kit. Do not delete the nodes.

Signed-off-by: Marek Vasut <marex at denx.de>
---
Cc: Fabio Estevam <festevam at gmail.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt at linaro.org>
Cc: Marek Vasut <marex at denx.de>
Cc: NXP Linux Team <linux-imx at nxp.com>
Cc: Pengutronix Kernel Team <kernel at pengutronix.de>
Cc: Rob Herring <robh+dt at kernel.org>
Cc: Sascha Hauer <s.hauer at pengutronix.de>
Cc: Shawn Guo <shawnguo at kernel.org>
Cc: devicetree at vger.kernel.org
Cc: kernel at dh-electronics.com
Cc: linux-arm-kernel at lists.infradead.org
---
 arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
index b657ac6adddbe..1cbf49ec138b9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
@@ -104,18 +104,6 @@ led-3 {
 	};
 };
 
-/*
- * PDK2 carrier board uses SoM with KSZ9131 populated and connected to
- * SoM EQoS ethernet RGMII interface. Remove the other SoM PHY DT node.
- */
-/delete-node/ &ethphy0f;
-
-/*
- * PDK2 carrier board has KSZ9021 PHY populated and connected to SoM FEC
- * ethernet RGMII interface. The SoM is not populated with second FEC PHY.
- */
-/delete-node/ &ethphy1f;
-
 &fec {	/* Second ethernet */
 	phy-handle = <&ethphypdk>;
 
-- 
2.39.1