[PATCH v4 11/12] net: ethernet: mtk_eth_soc: switch to external PCS driver

[Russell King (Oracle)]

On Fri, Feb 10, 2023 at 11:40:22PM +0000, Daniel Golle wrote:
> +		eth->sgmii->dev = eth->dev;
>  		err = mtk_sgmii_init(eth->sgmii, pdev->dev.of_node,
>  				     eth->soc->ana_rgc3);

>From what I can tell, it looks like sgmii->dev is only used within
mtk_sgmii_init() and nowhere else, so does it make sense to store
this in the structure rather than passing it as another argument to
this function? Seems a little wasteful for something that is only
used there.

> diff --git a/drivers/net/pcs/pcs-mtk-lynxi.c b/drivers/net/pcs/pcs-mtk-lynxi.c
> index 67965a6b57a4..f10621fc5baa 100644
> --- a/drivers/net/pcs/pcs-mtk-lynxi.c
> +++ b/drivers/net/pcs/pcs-mtk-lynxi.c
> @@ -146,6 +146,10 @@ static int mtk_pcs_lynxi_config(struct phylink_pcs *pcs, unsigned int mode,
>  		bmcr = 0;
>  
>  	if (mpcs->interface != interface) {
> +		link_timer = phylink_get_link_timer_ns(interface);
> +		if (link_timer < 0)
> +			return link_timer;
> +
>  		/* PHYA power down */
>  		regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL,
>  				   SGMII_PHYA_PWD, SGMII_PHYA_PWD);
> @@ -168,11 +172,7 @@ static int mtk_pcs_lynxi_config(struct phylink_pcs *pcs, unsigned int mode,
>  		regmap_update_bits(mpcs->regmap, mpcs->ana_rgc3,
>  				   RG_PHY_SPEED_MASK, rgc3);
>  
> -		/* Setup the link timer and QPHY power up inside SGMIISYS */
> -		link_timer = phylink_get_link_timer_ns(interface);
> -		if (link_timer < 0)
> -			return link_timer;
> -
> +		/* Setup the link timer */
>  		regmap_write(mpcs->regmap, SGMSYS_PCS_LINK_TIMER, link_timer / 2 / 8);
>  
>  		mpcs->interface = interface;

I'm guessing you meant to squash that into patch 10 rather than this
patch?

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!