[PATCH v9 14/15] mmc: sdhci-cadence: Support mmc hardware reset
Brad Larson
blarson at amd.com
Tue Feb 7 12:53:21 PST 2023
Hi Philipp,
On Thu, Jan 19, 2023 at 10:34, Philipp Zabel wrote:
> On Wed, Jan 18, 2023 at 07:51:35PM -0800, Brad Larson wrote:
>> Add support for mmc hardware reset using a reset-controller
>> that would need to be enabled in the device tree with
>> a supporting driver. The default is disabled for all
>> existing designs.
>>
>> Signed-off-by: Brad Larson <blarson at amd.com>
>> ---
>>
>> Changes since v6:
>> - Previously patch 17/17
>> - Changed delay after reset_control_assert() from 9 to 3 usec
>> - Renamed sdhci_mmc_hw_reset() to sdhci_cdns_mmc_hw_reset()
>>
>> ---
>> drivers/mmc/host/sdhci-cadence.c | 31 +++++++++++++++++++++++++++++++
>> 1 file changed, 31 insertions(+)
>>
>> diff --git a/drivers/mmc/host/sdhci-cadence.c b/drivers/mmc/host/sdhci-cadence.c
>> index e92aa79a8be2..62321cef41db 100644
>> --- a/drivers/mmc/host/sdhci-cadence.c
>> +++ b/drivers/mmc/host/sdhci-cadence.c
>> @@ -12,6 +12,7 @@
[...]
>> static int sdhci_cdns_probe(struct platform_device *pdev)
>> {
>> struct sdhci_host *host;
>> @@ -521,6 +541,17 @@ static int sdhci_cdns_probe(struct platform_device *pdev)
>> if (ret)
>> goto free;
>>
>> + if (host->mmc->caps & MMC_CAP_HW_RESET) {
>> + priv->rst_hw = devm_reset_control_get_optional_exclusive(dev, "hw");
>> + if (IS_ERR(priv->rst_hw)) {
>> + ret = PTR_ERR(priv->rst_hw);
>> + if (ret == -ENOENT)
>> + priv->rst_hw = NULL;
>
> The optional reset_control_get variants return NULL instead of -ENOENT
> if no reset is specified.
>
> This should return on any error instead.
>
>> + } else {
>> + host->mmc_host_ops.card_hw_reset = sdhci_cdns_mmc_hw_reset;
>
> This probably shouldn't be set if reset_control_get_optional returned NULL.
[...]
Thanks I see now with the argument optional=true in __of_reset_control_get() it is
returning NULL and not -ENOENT. This is the updated version.
+ if (host->mmc->caps & MMC_CAP_HW_RESET) {
+ priv->rst_hw = devm_reset_control_get_optional_exclusive(dev, "hw");
+ if (IS_ERR(priv->rst_hw))
+ return dev_err_probe(mmc_dev(host->mmc), PTR_ERR(priv->rst_hw),
+ "reset controller error\n");
+ if (priv->rst_hw)
+ host->mmc_host_ops.card_hw_reset = sdhci_cdns_mmc_hw_reset;
+ }
Regards,
Brad
More information about the linux-arm-kernel
mailing list