[PATCH v8 1/4] dt-bindings: imx6q-pcie: Restruct i.MX PCIe schema
Hongxing Zhu
hongxing.zhu at nxp.com
Thu Feb 2 00:01:03 PST 2023
> -----Original Message-----
> From: Rob Herring <robh at kernel.org>
> Sent: 2023年2月2日 3:08
> To: Hongxing Zhu <hongxing.zhu at nxp.com>
> Cc: krzysztof.kozlowski+dt at linaro.org; l.stach at pengutronix.de;
> shawnguo at kernel.org; lorenzo.pieralisi at arm.com; Peng Fan
> <peng.fan at nxp.com>; marex at denx.de; Marcel Ziswiler
> <marcel.ziswiler at toradex.com>; tharvey at gateworks.com; Frank Li
> <frank.li at nxp.com>; devicetree at vger.kernel.org;
> linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org;
> kernel at pengutronix.de; dl-linux-imx <linux-imx at nxp.com>
> Subject: Re: [PATCH v8 1/4] dt-bindings: imx6q-pcie: Restruct i.MX PCIe schema
>
> On Wed, Feb 01, 2023 at 04:06:50PM +0800, Richard Zhu wrote:
> > Restruct i.MX PCIe schema, derive the common properties, thus they can
> > be shared by both the RC and Endpoint schema.
> >
> > Update the description of fsl,imx6q-pcie.yaml, and move the EP mode
> > compatible to fsl,imx6q-pcie-ep.yaml.
> >
> > Add support for i.MX8M PCIe Endpoint modes, and update the MAINTAINER
> > accordingly.
> >
> > Signed-off-by: Richard Zhu <hongxing.zhu at nxp.com>
> > ---
> > .../bindings/pci/fsl,imx6q-pcie-common.yaml | 121 ++++++++++
> > .../bindings/pci/fsl,imx6q-pcie-ep.yaml | 217 ++++++++++++++++++
> > .../bindings/pci/fsl,imx6q-pcie.yaml | 111 +--------
> > MAINTAINERS | 2 +
> > 4 files changed, 347 insertions(+), 104 deletions(-) create mode
> > 100644
> > Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
> > create mode 100644
> > Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
> > b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
> > new file mode 100644
> > index 000000000000..a2eb56de0294
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
> > @@ -0,0 +1,121 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id:
> > +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi
> >
> +cetree.org%2Fschemas%2Fpci%2Ffsl%2Cimx6q-pcie-common.yaml%23&data=
> 05%
> >
> +7C01%7Chongxing.zhu%40nxp.com%7C7a6d389fd3434c0ab8ee08db04879fe7
> %7C68
> >
> +6ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C638108752776087413%7C
> Unknown
> >
> +%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haW
> wiLC
> >
> +JXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=E4svdTu4JGnq80n8E6px4sDLABJ
> T%2Fm1%
> > +2BXCLAMr2Dnso%3D&reserved=0
> > +$schema:
> > +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi
> >
> +cetree.org%2Fmeta-schemas%2Fcore.yaml%23&data=05%7C01%7Chongxing.
> zhu%
> >
> +40nxp.com%7C7a6d389fd3434c0ab8ee08db04879fe7%7C686ea1d3bc2b4c6fa
> 92cd9
> >
> +9c5c301635%7C0%7C0%7C638108752776087413%7CUnknown%7CTWFpbGZs
> b3d8eyJWI
> >
> +joiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3
> 000%
> >
> +7C%7C%7C&sdata=%2BpZUAonpppVjVYdxWJH%2BxXm0c6lKYGePqrTf5Gg2Gf
> Q%3D&res
> > +erved=0
> > +
> > +title: Freescale i.MX6 PCIe RC/EP controller
> > +
> > +maintainers:
> > + - Lucas Stach <l.stach at pengutronix.de>
> > + - Richard Zhu <hongxing.zhu at nxp.com>
> > +
> > +description:
> > + Generic Freescale i.MX PCIe Root Port and Endpoint controller
> > + properties.
> > +
> > +properties:
> > + clocks:
> > + minItems: 3
> > + items:
> > + - description: PCIe bridge clock.
> > + - description: PCIe bus clock.
> > + - description: PCIe PHY clock.
> > + - description: Additional required clock entry for imx6sx-pcie,
> > + imx8mq-pcie.
> > +
> > + clock-names:
> > + minItems: 3
> > + items:
> > + - const: pcie
> > + - const: pcie_bus
> > + - enum: [ pcie_phy, pcie_aux ]
> > + - enum: [ pcie_inbound_axi, pcie_aux ]
> > +
> > + num-lanes:
> > + const: 1
> > +
> > + fsl,imx7d-pcie-phy:
> > + $ref: /schemas/types.yaml#/definitions/phandle
> > + description: A phandle to an fsl,imx7d-pcie-phy node. Additional
> > + required properties for imx7d-pcie and imx8mq-pcie.
> > +
> > + power-domains:
> > + minItems: 1
> > + items:
> > + - description: The phandle pointing to the DISPLAY domain for
> > + imx6sx-pcie, to PCIE_PHY power domain for imx7d-pcie and
> > + imx8mq-pcie.
> > + - description: The phandle pointing to the PCIE_PHY power domains
> > + for imx6sx-pcie.
> > +
> > + power-domain-names:
> > + minItems: 1
> > + items:
> > + - const: pcie
> > + - const: pcie_phy
> > +
> > + resets:
> > + minItems: 2
> > + maxItems: 3
> > + description: Phandles to PCIe-related reset lines exposed by SRC
> > + IP block. Additional required by imx7d-pcie and imx8mq-pcie.
> > +
> > + reset-names:
> > + minItems: 2
> > + maxItems: 3
> > +
> > + fsl,tx-deemph-gen1:
> > + description: Gen1 De-emphasis value (optional required).
> > + $ref: /schemas/types.yaml#/definitions/uint32
> > + default: 0
> > +
> > + fsl,tx-deemph-gen2-3p5db:
> > + description: Gen2 (3.5db) De-emphasis value (optional required).
> > + $ref: /schemas/types.yaml#/definitions/uint32
> > + default: 0
> > +
> > + fsl,tx-deemph-gen2-6db:
> > + description: Gen2 (6db) De-emphasis value (optional required).
> > + $ref: /schemas/types.yaml#/definitions/uint32
> > + default: 20
> > +
> > + fsl,tx-swing-full:
> > + description: Gen2 TX SWING FULL value (optional required).
> > + $ref: /schemas/types.yaml#/definitions/uint32
> > + default: 127
> > +
> > + fsl,tx-swing-low:
> > + description: TX launch amplitude swing_low value (optional required).
> > + $ref: /schemas/types.yaml#/definitions/uint32
> > + default: 127
> > +
> > + fsl,max-link-speed:
> > + description: Specify PCI Gen for link capability (optional required).
> > + Note that the IMX6 LVDS clock outputs do not meet gen2 jitter
> > + requirements and thus for gen2 capability a gen2 compliant clock
> > + generator should be used and configured.
> > + $ref: /schemas/types.yaml#/definitions/uint32
> > + enum: [1, 2, 3, 4]
> > + default: 1
> > +
> > + phys:
> > + maxItems: 1
> > +
> > + phy-names:
> > + const: pcie-phy
> > +
> > + vpcie-supply:
> > + description: Should specify the regulator in charge of PCIe port power.
> > + The regulator will be enabled when initializing the PCIe host and
> > + disabled either as part of the init process or when shutting down
> > + the host (optional required).
> > +
> > + vph-supply:
> > + description: Should specify the regulator in charge of VPH one of
> > + the three PCIe PHY powers. This regulator can be supplied by both
> > + 1.8v and 3.3v voltage supplies (optional required).
> > +
> > +additionalProperties: true
> > +
> > +...
> > diff --git
> > a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
> > b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
> > new file mode 100644
> > index 000000000000..8b2506a85083
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
> > @@ -0,0 +1,217 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id:
> > +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi
> >
> +cetree.org%2Fschemas%2Fpci%2Ffsl%2Cimx6q-pcie-ep.yaml%23&data=05%7
> C01
> >
> +%7Chongxing.zhu%40nxp.com%7C7a6d389fd3434c0ab8ee08db04879fe7%7C
> 686ea1
> >
> +d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C638108752776087413%7CUnkn
> own%7CT
> >
> +WFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJX
> VC
> >
> +I6Mn0%3D%7C3000%7C%7C%7C&sdata=%2BJDxDgyYSEEnt2sIHFbH7o8xKfhR
> 1Oj5e7WI
> > +LraX08c%3D&reserved=0
> > +$schema:
> > +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi
> >
> +cetree.org%2Fmeta-schemas%2Fcore.yaml%23&data=05%7C01%7Chongxing.
> zhu%
> >
> +40nxp.com%7C7a6d389fd3434c0ab8ee08db04879fe7%7C686ea1d3bc2b4c6fa
> 92cd9
> >
> +9c5c301635%7C0%7C0%7C638108752776087413%7CUnknown%7CTWFpbGZs
> b3d8eyJWI
> >
> +joiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3
> 000%
> >
> +7C%7C%7C&sdata=%2BpZUAonpppVjVYdxWJH%2BxXm0c6lKYGePqrTf5Gg2Gf
> Q%3D&res
> > +erved=0
> > +
> > +title: Freescale i.MX6 PCIe Endpoint controller
> > +
> > +maintainers:
> > + - Lucas Stach <l.stach at pengutronix.de>
> > + - Richard Zhu <hongxing.zhu at nxp.com>
> > +
> > +description: |+
> > + This PCIe controller is based on the Synopsys DesignWare PCIe IP
> > +and
> > + thus inherits all the common properties defined in snps,dw-pcie-ep.yaml.
> > + The controller instances are dual mode where in they can work
> > +either in
> > + Root Port mode or Endpoint mode but one at a time.
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - fsl,imx8mm-pcie-ep
> > + - fsl,imx8mq-pcie-ep
> > + - fsl,imx8mp-pcie-ep
> > +
> > + reg:
> > + minItems: 2
> > +
> > + reg-names:
> > + items:
> > + - const: dbi
> > + - const: addr_space
> > +
> > + interrupts:
> > + items:
> > + - description: builtin eDMA interrupter.
> > +
> > + interrupt-names:
> > + items:
> > + - const: dma
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - reg-names
> > + - num-lanes
> > + - interrupts
> > + - interrupt-names
> > + - clocks
> > + - clock-names
> > +
> > +allOf:
> > + - $ref: /schemas/pci/snps,dw-pcie-ep.yaml#
> > + - $ref: /schemas/pci/fsl,imx6q-pcie-common.yaml#
> > +
> > + - if:
> > + properties:
> > + compatible:
> > + contains:
> > + const: fsl,imx6sx-pcie-ep
> > + then:
> > + properties:
> > + clock-names:
> > + items:
> > + - {}
> > + - {}
> > + - const: pcie_phy
> > + - const: pcie_inbound_axi
> > + power-domains:
> > + minItems: 2
> > + power-domain-names:
> > + minItems: 2
> > + - if:
> > + properties:
> > + compatible:
> > + contains:
> > + const: fsl,imx8mq-pcie-ep
> > + then:
> > + properties:
> > + clock-names:
> > + items:
> > + - {}
> > + - {}
> > + - const: pcie_phy
> > + - const: pcie_aux
> > + - if:
> > + properties:
> > + compatible:
> > + not:
> > + contains:
> > + enum:
> > + - fsl,imx6sx-pcie-ep
> > + - fsl,imx8mq-pcie-ep
> > + then:
> > + properties:
> > + clocks:
> > + maxItems: 3
> > + clock-names:
> > + maxItems: 3
> > +
> > + - if:
> > + properties:
> > + compatible:
> > + contains:
> > + enum:
> > + - fsl,imx6q-pcie-ep
> > + - fsl,imx6qp-pcie-ep
> > + - fsl,imx7d-pcie-ep
> > + then:
> > + properties:
> > + clock-names:
> > + maxItems: 3
> > + contains:
> > + const: pcie_phy
> > +
> > + - if:
> > + properties:
> > + compatible:
> > + contains:
> > + enum:
> > + - fsl,imx8mm-pcie-ep
> > + - fsl,imx8mp-pcie-ep
> > + then:
> > + properties:
> > + clock-names:
> > + maxItems: 3
> > + contains:
> > + const: pcie_aux
> > + - if:
> > + properties:
> > + compatible:
> > + contains:
> > + enum:
> > + - fsl,imx6q-pcie-ep
> > + - fsl,imx6qp-pcie-ep
> > + then:
> > + properties:
> > + power-domains: false
> > + power-domain-names: false
> > +
> > + - if:
> > + not:
> > + properties:
> > + compatible:
> > + contains:
> > + enum:
> > + - fsl,imx6sx-pcie-ep
> > + - fsl,imx6q-pcie-ep
> > + - fsl,imx6qp-pcie-ep
> > + then:
> > + properties:
> > + power-domains:
> > + maxItems: 1
> > + power-domain-names: false
> > +
> > + - if:
> > + properties:
> > + compatible:
> > + contains:
> > + enum:
> > + - fsl,imx6q-pcie-ep
> > + - fsl,imx6sx-pcie-ep
> > + - fsl,imx6qp-pcie-ep
> > + - fsl,imx7d-pcie-ep
> > + - fsl,imx8mq-pcie-ep
> > + then:
> > + properties:
> > + resets:
> > + minItems: 3
> > + reset-names:
> > + items:
> > + - const: pciephy
> > + - const: apps
> > + - const: turnoff
> > + else:
> > + properties:
> > + resets:
> > + maxItems: 2
> > + reset-names:
> > + items:
> > + - const: apps
> > + - const: turnoff
>
> All these constraints should be the same regardless of host or endpoint mode, so
> they belong in the common schema. After all, it's the same h/w for each SoC.
Got that. Thanks a lot.
I'm not sure to move these to generic common schema or not in v8 series.
Now, I know how do that. Thanks for your advice.
Best Regards
Richard Zhu
>
> Rob
More information about the linux-arm-kernel
mailing list