[PATCH v8 1/4] dt-bindings: imx6q-pcie: Restruct i.MX PCIe schema
Rob Herring
robh at kernel.org
Wed Feb 1 11:07:52 PST 2023
On Wed, Feb 01, 2023 at 04:06:50PM +0800, Richard Zhu wrote:
> Restruct i.MX PCIe schema, derive the common properties, thus they can
> be shared by both the RC and Endpoint schema.
>
> Update the description of fsl,imx6q-pcie.yaml, and move the EP mode
> compatible to fsl,imx6q-pcie-ep.yaml.
>
> Add support for i.MX8M PCIe Endpoint modes, and update the MAINTAINER
> accordingly.
>
> Signed-off-by: Richard Zhu <hongxing.zhu at nxp.com>
> ---
> .../bindings/pci/fsl,imx6q-pcie-common.yaml | 121 ++++++++++
> .../bindings/pci/fsl,imx6q-pcie-ep.yaml | 217 ++++++++++++++++++
> .../bindings/pci/fsl,imx6q-pcie.yaml | 111 +--------
> MAINTAINERS | 2 +
> 4 files changed, 347 insertions(+), 104 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
> create mode 100644 Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
>
> diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
> new file mode 100644
> index 000000000000..a2eb56de0294
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
> @@ -0,0 +1,121 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/fsl,imx6q-pcie-common.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale i.MX6 PCIe RC/EP controller
> +
> +maintainers:
> + - Lucas Stach <l.stach at pengutronix.de>
> + - Richard Zhu <hongxing.zhu at nxp.com>
> +
> +description:
> + Generic Freescale i.MX PCIe Root Port and Endpoint controller
> + properties.
> +
> +properties:
> + clocks:
> + minItems: 3
> + items:
> + - description: PCIe bridge clock.
> + - description: PCIe bus clock.
> + - description: PCIe PHY clock.
> + - description: Additional required clock entry for imx6sx-pcie,
> + imx8mq-pcie.
> +
> + clock-names:
> + minItems: 3
> + items:
> + - const: pcie
> + - const: pcie_bus
> + - enum: [ pcie_phy, pcie_aux ]
> + - enum: [ pcie_inbound_axi, pcie_aux ]
> +
> + num-lanes:
> + const: 1
> +
> + fsl,imx7d-pcie-phy:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description: A phandle to an fsl,imx7d-pcie-phy node. Additional
> + required properties for imx7d-pcie and imx8mq-pcie.
> +
> + power-domains:
> + minItems: 1
> + items:
> + - description: The phandle pointing to the DISPLAY domain for
> + imx6sx-pcie, to PCIE_PHY power domain for imx7d-pcie and
> + imx8mq-pcie.
> + - description: The phandle pointing to the PCIE_PHY power domains
> + for imx6sx-pcie.
> +
> + power-domain-names:
> + minItems: 1
> + items:
> + - const: pcie
> + - const: pcie_phy
> +
> + resets:
> + minItems: 2
> + maxItems: 3
> + description: Phandles to PCIe-related reset lines exposed by SRC
> + IP block. Additional required by imx7d-pcie and imx8mq-pcie.
> +
> + reset-names:
> + minItems: 2
> + maxItems: 3
> +
> + fsl,tx-deemph-gen1:
> + description: Gen1 De-emphasis value (optional required).
> + $ref: /schemas/types.yaml#/definitions/uint32
> + default: 0
> +
> + fsl,tx-deemph-gen2-3p5db:
> + description: Gen2 (3.5db) De-emphasis value (optional required).
> + $ref: /schemas/types.yaml#/definitions/uint32
> + default: 0
> +
> + fsl,tx-deemph-gen2-6db:
> + description: Gen2 (6db) De-emphasis value (optional required).
> + $ref: /schemas/types.yaml#/definitions/uint32
> + default: 20
> +
> + fsl,tx-swing-full:
> + description: Gen2 TX SWING FULL value (optional required).
> + $ref: /schemas/types.yaml#/definitions/uint32
> + default: 127
> +
> + fsl,tx-swing-low:
> + description: TX launch amplitude swing_low value (optional required).
> + $ref: /schemas/types.yaml#/definitions/uint32
> + default: 127
> +
> + fsl,max-link-speed:
> + description: Specify PCI Gen for link capability (optional required).
> + Note that the IMX6 LVDS clock outputs do not meet gen2 jitter
> + requirements and thus for gen2 capability a gen2 compliant clock
> + generator should be used and configured.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [1, 2, 3, 4]
> + default: 1
> +
> + phys:
> + maxItems: 1
> +
> + phy-names:
> + const: pcie-phy
> +
> + vpcie-supply:
> + description: Should specify the regulator in charge of PCIe port power.
> + The regulator will be enabled when initializing the PCIe host and
> + disabled either as part of the init process or when shutting down
> + the host (optional required).
> +
> + vph-supply:
> + description: Should specify the regulator in charge of VPH one of
> + the three PCIe PHY powers. This regulator can be supplied by both
> + 1.8v and 3.3v voltage supplies (optional required).
> +
> +additionalProperties: true
> +
> +...
> diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
> new file mode 100644
> index 000000000000..8b2506a85083
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
> @@ -0,0 +1,217 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/fsl,imx6q-pcie-ep.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale i.MX6 PCIe Endpoint controller
> +
> +maintainers:
> + - Lucas Stach <l.stach at pengutronix.de>
> + - Richard Zhu <hongxing.zhu at nxp.com>
> +
> +description: |+
> + This PCIe controller is based on the Synopsys DesignWare PCIe IP and
> + thus inherits all the common properties defined in snps,dw-pcie-ep.yaml.
> + The controller instances are dual mode where in they can work either in
> + Root Port mode or Endpoint mode but one at a time.
> +
> +properties:
> + compatible:
> + enum:
> + - fsl,imx8mm-pcie-ep
> + - fsl,imx8mq-pcie-ep
> + - fsl,imx8mp-pcie-ep
> +
> + reg:
> + minItems: 2
> +
> + reg-names:
> + items:
> + - const: dbi
> + - const: addr_space
> +
> + interrupts:
> + items:
> + - description: builtin eDMA interrupter.
> +
> + interrupt-names:
> + items:
> + - const: dma
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> + - num-lanes
> + - interrupts
> + - interrupt-names
> + - clocks
> + - clock-names
> +
> +allOf:
> + - $ref: /schemas/pci/snps,dw-pcie-ep.yaml#
> + - $ref: /schemas/pci/fsl,imx6q-pcie-common.yaml#
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: fsl,imx6sx-pcie-ep
> + then:
> + properties:
> + clock-names:
> + items:
> + - {}
> + - {}
> + - const: pcie_phy
> + - const: pcie_inbound_axi
> + power-domains:
> + minItems: 2
> + power-domain-names:
> + minItems: 2
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: fsl,imx8mq-pcie-ep
> + then:
> + properties:
> + clock-names:
> + items:
> + - {}
> + - {}
> + - const: pcie_phy
> + - const: pcie_aux
> + - if:
> + properties:
> + compatible:
> + not:
> + contains:
> + enum:
> + - fsl,imx6sx-pcie-ep
> + - fsl,imx8mq-pcie-ep
> + then:
> + properties:
> + clocks:
> + maxItems: 3
> + clock-names:
> + maxItems: 3
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - fsl,imx6q-pcie-ep
> + - fsl,imx6qp-pcie-ep
> + - fsl,imx7d-pcie-ep
> + then:
> + properties:
> + clock-names:
> + maxItems: 3
> + contains:
> + const: pcie_phy
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - fsl,imx8mm-pcie-ep
> + - fsl,imx8mp-pcie-ep
> + then:
> + properties:
> + clock-names:
> + maxItems: 3
> + contains:
> + const: pcie_aux
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - fsl,imx6q-pcie-ep
> + - fsl,imx6qp-pcie-ep
> + then:
> + properties:
> + power-domains: false
> + power-domain-names: false
> +
> + - if:
> + not:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - fsl,imx6sx-pcie-ep
> + - fsl,imx6q-pcie-ep
> + - fsl,imx6qp-pcie-ep
> + then:
> + properties:
> + power-domains:
> + maxItems: 1
> + power-domain-names: false
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - fsl,imx6q-pcie-ep
> + - fsl,imx6sx-pcie-ep
> + - fsl,imx6qp-pcie-ep
> + - fsl,imx7d-pcie-ep
> + - fsl,imx8mq-pcie-ep
> + then:
> + properties:
> + resets:
> + minItems: 3
> + reset-names:
> + items:
> + - const: pciephy
> + - const: apps
> + - const: turnoff
> + else:
> + properties:
> + resets:
> + maxItems: 2
> + reset-names:
> + items:
> + - const: apps
> + - const: turnoff
All these constraints should be the same regardless of host or endpoint
mode, so they belong in the common schema. After all, it's the same h/w
for each SoC.
Rob
More information about the linux-arm-kernel
mailing list