[PATCH v2 2/4] dt-bindings: firmware: xilinx: Sort node names (clock-controller)

[Michal Simek]

Nodes should be sorted that's why move clock-controller to the top of list.

Signed-off-by: Michal Simek <michal.simek at amd.com>
---

Changes in v2:
- New patch in series

 .../firmware/xilinx/xlnx,zynqmp-firmware.yaml  | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
index 310c334e88a2..d64033140c53 100644
--- a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
+++ b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
@@ -41,6 +41,15 @@ properties:
   "#power-domain-cells":
     const: 1
 
+  clock-controller:
+    $ref: /schemas/clock/xlnx,versal-clk.yaml#
+    description: The clock controller is a hardware block of Xilinx versal
+      clock tree. It reads required input clock frequencies from the devicetree
+      and acts as clock provider for all clock consumers of PS clocks.list of
+      clock specifiers which are external input clocks to the given clock
+      controller.
+    type: object
+
   gpio:
     $ref: /schemas/gpio/xlnx,zynqmp-gpio-modepin.yaml#
     description: The gpio node describes connect to PS_MODE pins via firmware
@@ -84,15 +93,6 @@ properties:
       vector.
     type: object
 
-  clock-controller:
-    $ref: /schemas/clock/xlnx,versal-clk.yaml#
-    description: The clock controller is a hardware block of Xilinx versal
-      clock tree. It reads required input clock frequencies from the devicetree
-      and acts as clock provider for all clock consumers of PS clocks.list of
-      clock specifiers which are external input clocks to the given clock
-      controller.
-    type: object
-
 required:
   - compatible
 
-- 
2.36.1