[PATCH] arm64: dts: juno: align thermal zone names with bindings

[Liviu Dudau]

On Sat, Dec 09, 2023 at 06:16:12PM +0100, Krzysztof Kozlowski wrote:
> Thermal bindings require thermal zone node names to match
> certain patterns:
> 
>   juno.dtb: thermal-zones: 'big-cluster', 'gpu0', 'gpu1', 'little-cluster', 'pmic', 'soc'
>     do not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$', 'pinctrl-[0-9]+'
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>

Acked-by: Liviu Dudau <liviu.dudau at arm.com>

Thanks for fixing this!

Best regards,
Liviu

> ---
>  arch/arm64/boot/dts/arm/juno-base.dtsi | 12 ++++++------
>  arch/arm64/boot/dts/arm/juno-scmi.dtsi | 12 ++++++------
>  2 files changed, 12 insertions(+), 12 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
> index 8b4d280b1e7e..b897f5542c0a 100644
> --- a/arch/arm64/boot/dts/arm/juno-base.dtsi
> +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
> @@ -747,7 +747,7 @@ scpi_sensors0: sensors {
>  	};
>  
>  	thermal-zones {
> -		pmic {
> +		pmic-thermal {
>  			polling-delay = <1000>;
>  			polling-delay-passive = <100>;
>  			thermal-sensors = <&scpi_sensors0 0>;
> @@ -760,7 +760,7 @@ pmic_crit0: trip0 {
>  			};
>  		};
>  
> -		soc {
> +		soc-thermal {
>  			polling-delay = <1000>;
>  			polling-delay-passive = <100>;
>  			thermal-sensors = <&scpi_sensors0 3>;
> @@ -773,28 +773,28 @@ soc_crit0: trip0 {
>  			};
>  		};
>  
> -		big_cluster_thermal_zone: big-cluster {
> +		big_cluster_thermal_zone: big-cluster-thermal {
>  			polling-delay = <1000>;
>  			polling-delay-passive = <100>;
>  			thermal-sensors = <&scpi_sensors0 21>;
>  			status = "disabled";
>  		};
>  
> -		little_cluster_thermal_zone: little-cluster {
> +		little_cluster_thermal_zone: little-cluster-thermal {
>  			polling-delay = <1000>;
>  			polling-delay-passive = <100>;
>  			thermal-sensors = <&scpi_sensors0 22>;
>  			status = "disabled";
>  		};
>  
> -		gpu0_thermal_zone: gpu0 {
> +		gpu0_thermal_zone: gpu0-thermal {
>  			polling-delay = <1000>;
>  			polling-delay-passive = <100>;
>  			thermal-sensors = <&scpi_sensors0 23>;
>  			status = "disabled";
>  		};
>  
> -		gpu1_thermal_zone: gpu1 {
> +		gpu1_thermal_zone: gpu1-thermal {
>  			polling-delay = <1000>;
>  			polling-delay-passive = <100>;
>  			thermal-sensors = <&scpi_sensors0 24>;
> diff --git a/arch/arm64/boot/dts/arm/juno-scmi.dtsi b/arch/arm64/boot/dts/arm/juno-scmi.dtsi
> index ec85cd2c733c..31929e2377d8 100644
> --- a/arch/arm64/boot/dts/arm/juno-scmi.dtsi
> +++ b/arch/arm64/boot/dts/arm/juno-scmi.dtsi
> @@ -76,27 +76,27 @@ scmi_sensors0: protocol at 15 {
>  	};
>  
>  	thermal-zones {
> -		pmic {
> +		pmic-thermal {
>  			thermal-sensors = <&scmi_sensors0 0>;
>  		};
>  
> -		soc {
> +		soc-thermal {
>  			thermal-sensors = <&scmi_sensors0 3>;
>  		};
>  
> -		big-cluster {
> +		big-cluster-thermal {
>  			thermal-sensors = <&scmi_sensors0 21>;
>  		};
>  
> -		little-cluster {
> +		little-cluster-thermal {
>  			thermal-sensors = <&scmi_sensors0 22>;
>  		};
>  
> -		gpu0 {
> +		gpu0-thermal {
>  			thermal-sensors = <&scmi_sensors0 23>;
>  		};
>  
> -		gpu1 {
> +		gpu1-thermal {
>  			thermal-sensors = <&scmi_sensors0 24>;
>  		};
>  	};
> -- 
> 2.34.1
> 

-- 
====================
| I would like to |
| fix the world,  |
| but they're not |
| giving me the   |
 \ source code!  /
  ---------------
    ¯\_(ツ)_/¯