[PATCH] arm64: dts: juno: align thermal zone names with bindings

Krzysztof Kozlowski krzysztof.kozlowski at linaro.org
Sat Dec 9 09:16:12 PST 2023


Thermal bindings require thermal zone node names to match
certain patterns:

  juno.dtb: thermal-zones: 'big-cluster', 'gpu0', 'gpu1', 'little-cluster', 'pmic', 'soc'
    do not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$', 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
 arch/arm64/boot/dts/arm/juno-base.dtsi | 12 ++++++------
 arch/arm64/boot/dts/arm/juno-scmi.dtsi | 12 ++++++------
 2 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index 8b4d280b1e7e..b897f5542c0a 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -747,7 +747,7 @@ scpi_sensors0: sensors {
 	};
 
 	thermal-zones {
-		pmic {
+		pmic-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 0>;
@@ -760,7 +760,7 @@ pmic_crit0: trip0 {
 			};
 		};
 
-		soc {
+		soc-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 3>;
@@ -773,28 +773,28 @@ soc_crit0: trip0 {
 			};
 		};
 
-		big_cluster_thermal_zone: big-cluster {
+		big_cluster_thermal_zone: big-cluster-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 21>;
 			status = "disabled";
 		};
 
-		little_cluster_thermal_zone: little-cluster {
+		little_cluster_thermal_zone: little-cluster-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 22>;
 			status = "disabled";
 		};
 
-		gpu0_thermal_zone: gpu0 {
+		gpu0_thermal_zone: gpu0-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 23>;
 			status = "disabled";
 		};
 
-		gpu1_thermal_zone: gpu1 {
+		gpu1_thermal_zone: gpu1-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 24>;
diff --git a/arch/arm64/boot/dts/arm/juno-scmi.dtsi b/arch/arm64/boot/dts/arm/juno-scmi.dtsi
index ec85cd2c733c..31929e2377d8 100644
--- a/arch/arm64/boot/dts/arm/juno-scmi.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-scmi.dtsi
@@ -76,27 +76,27 @@ scmi_sensors0: protocol at 15 {
 	};
 
 	thermal-zones {
-		pmic {
+		pmic-thermal {
 			thermal-sensors = <&scmi_sensors0 0>;
 		};
 
-		soc {
+		soc-thermal {
 			thermal-sensors = <&scmi_sensors0 3>;
 		};
 
-		big-cluster {
+		big-cluster-thermal {
 			thermal-sensors = <&scmi_sensors0 21>;
 		};
 
-		little-cluster {
+		little-cluster-thermal {
 			thermal-sensors = <&scmi_sensors0 22>;
 		};
 
-		gpu0 {
+		gpu0-thermal {
 			thermal-sensors = <&scmi_sensors0 23>;
 		};
 
-		gpu1 {
+		gpu1-thermal {
 			thermal-sensors = <&scmi_sensors0 24>;
 		};
 	};
-- 
2.34.1




More information about the linux-arm-kernel mailing list