[PATCH v9 05/13] media: cadence: csi2rx: Add get_fmt and set_fmt pad ops
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Thu Aug 24 20:48:58 PDT 2023
Hi Jai,
Thank you for the patch.
On Fri, Aug 11, 2023 at 04:17:27PM +0530, Jai Luthra wrote:
> From: Pratyush Yadav <p.yadav at ti.com>
>
> The format is needed to calculate the link speed for the external DPHY
> configuration. It is not right to query the format from the source
> subdev. Add get_fmt and set_fmt pad operations so that the format can be
> configured and correct bpp be selected.
>
> Initialize and use the v4l2 subdev active state to keep track of the
> active formats. Also propagate the new format from the sink pad to all
> the source pads.
>
> Signed-off-by: Pratyush Yadav <p.yadav at ti.com>
> Co-authored-by: Jai Luthra <j-luthra at ti.com>
> Reviewed-by: Maxime Ripard <mripard at kernel.org>
> Signed-off-by: Jai Luthra <j-luthra at ti.com>
> ---
> Changes from v8:
> - Squash the patch adding RAW8 and RAW10 formats within this one
> - Single line struct entries in formats[] array
> - Skip specifiying redundant format.which entry in init_cfg()
>
> drivers/media/platform/cadence/cdns-csi2rx.c | 101 ++++++++++++++++++++++++++-
> 1 file changed, 100 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/platform/cadence/cdns-csi2rx.c b/drivers/media/platform/cadence/cdns-csi2rx.c
> index 9de3240e261c..047e74ee2443 100644
> --- a/drivers/media/platform/cadence/cdns-csi2rx.c
> +++ b/drivers/media/platform/cadence/cdns-csi2rx.c
> @@ -61,6 +61,11 @@ enum csi2rx_pads {
> CSI2RX_PAD_MAX,
> };
>
> +struct csi2rx_fmt {
> + u32 code;
> + u8 bpp;
> +};
> +
> struct csi2rx_priv {
> struct device *dev;
> unsigned int count;
> @@ -95,6 +100,32 @@ struct csi2rx_priv {
> int source_pad;
> };
>
> +static const struct csi2rx_fmt formats[] = {
> + { .code = MEDIA_BUS_FMT_YUYV8_1X16, .bpp = 16, },
> + { .code = MEDIA_BUS_FMT_UYVY8_1X16, .bpp = 16, },
> + { .code = MEDIA_BUS_FMT_YVYU8_1X16, .bpp = 16, },
> + { .code = MEDIA_BUS_FMT_VYUY8_1X16, .bpp = 16, },
> + { .code = MEDIA_BUS_FMT_SBGGR8_1X8, .bpp = 8, },
> + { .code = MEDIA_BUS_FMT_SGBRG8_1X8, .bpp = 8, },
> + { .code = MEDIA_BUS_FMT_SGRBG8_1X8, .bpp = 8, },
> + { .code = MEDIA_BUS_FMT_SRGGB8_1X8, .bpp = 8, },
> + { .code = MEDIA_BUS_FMT_SBGGR10_1X10, .bpp = 10, },
> + { .code = MEDIA_BUS_FMT_SGBRG10_1X10, .bpp = 10, },
> + { .code = MEDIA_BUS_FMT_SGRBG10_1X10, .bpp = 10, },
> + { .code = MEDIA_BUS_FMT_SRGGB10_1X10, .bpp = 10, },
> +};
> +
> +static const struct csi2rx_fmt *csi2rx_get_fmt_by_code(u32 code)
> +{
> + unsigned int i;
> +
> + for (i = 0; i < ARRAY_SIZE(formats); i++)
> + if (formats[i].code == code)
> + return &formats[i];
> +
> + return NULL;
> +}
> +
> static inline
> struct csi2rx_priv *v4l2_subdev_to_csi2rx(struct v4l2_subdev *subdev)
> {
> @@ -303,12 +334,73 @@ static int csi2rx_s_stream(struct v4l2_subdev *subdev, int enable)
> return ret;
> }
>
> +static int csi2rx_set_fmt(struct v4l2_subdev *subdev,
> + struct v4l2_subdev_state *state,
> + struct v4l2_subdev_format *format)
> +{
> + struct v4l2_mbus_framefmt *fmt;
> + unsigned int i;
> +
> + /* No transcoding, source and sink formats must match. */
> + if (format->pad != CSI2RX_PAD_SINK)
> + return v4l2_subdev_get_fmt(subdev, state, format);
> +
> + if (!csi2rx_get_fmt_by_code(format->format.code))
> + format->format.code = formats[0].code;
> +
> + format->format.field = V4L2_FIELD_NONE;
> +
> + /* Set sink format */
> + fmt = v4l2_subdev_get_pad_format(subdev, state, format->pad);
> + if (!fmt)
> + return -EINVAL;
You can drop this check, as format->pad is CSI2RX_PAD_SINK, this is
guaranteed to succeed.
> +
> + *fmt = format->format;
> +
> + /* Propagate to source formats */
> + for (i = CSI2RX_PAD_SOURCE_STREAM0; i < CSI2RX_PAD_MAX; i++) {
> + fmt = v4l2_subdev_get_pad_format(subdev, state, i);
> + if (!fmt)
> + return -EINVAL;
Same here.
With these minor issues addressed,
Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> + *fmt = format->format;
> + }
> +
> + return 0;
> +}
> +
> +static int csi2rx_init_cfg(struct v4l2_subdev *subdev,
> + struct v4l2_subdev_state *state)
> +{
> + struct v4l2_subdev_format format = {
> + .pad = CSI2RX_PAD_SINK,
> + .format = {
> + .width = 640,
> + .height = 480,
> + .code = MEDIA_BUS_FMT_UYVY8_1X16,
> + .field = V4L2_FIELD_NONE,
> + .colorspace = V4L2_COLORSPACE_SRGB,
> + .ycbcr_enc = V4L2_YCBCR_ENC_601,
> + .quantization = V4L2_QUANTIZATION_LIM_RANGE,
> + .xfer_func = V4L2_XFER_FUNC_SRGB,
> + },
> + };
> +
> + return csi2rx_set_fmt(subdev, state, &format);
> +}
> +
> +static const struct v4l2_subdev_pad_ops csi2rx_pad_ops = {
> + .get_fmt = v4l2_subdev_get_fmt,
> + .set_fmt = csi2rx_set_fmt,
> + .init_cfg = csi2rx_init_cfg,
> +};
> +
> static const struct v4l2_subdev_video_ops csi2rx_video_ops = {
> .s_stream = csi2rx_s_stream,
> };
>
> static const struct v4l2_subdev_ops csi2rx_subdev_ops = {
> .video = &csi2rx_video_ops,
> + .pad = &csi2rx_pad_ops,
> };
>
> static int csi2rx_async_bound(struct v4l2_async_notifier *notifier,
> @@ -532,9 +624,13 @@ static int csi2rx_probe(struct platform_device *pdev)
> if (ret)
> goto err_cleanup;
>
> + ret = v4l2_subdev_init_finalize(&csi2rx->subdev);
> + if (ret)
> + goto err_cleanup;
> +
> ret = v4l2_async_register_subdev(&csi2rx->subdev);
> if (ret < 0)
> - goto err_cleanup;
> + goto err_free_state;
>
> dev_info(&pdev->dev,
> "Probed CSI2RX with %u/%u lanes, %u streams, %s D-PHY\n",
> @@ -544,6 +640,8 @@ static int csi2rx_probe(struct platform_device *pdev)
>
> return 0;
>
> +err_free_state:
> + v4l2_subdev_cleanup(&csi2rx->subdev);
> err_cleanup:
> v4l2_async_nf_unregister(&csi2rx->notifier);
> v4l2_async_nf_cleanup(&csi2rx->notifier);
> @@ -560,6 +658,7 @@ static void csi2rx_remove(struct platform_device *pdev)
> v4l2_async_nf_unregister(&csi2rx->notifier);
> v4l2_async_nf_cleanup(&csi2rx->notifier);
> v4l2_async_unregister_subdev(&csi2rx->subdev);
> + v4l2_subdev_cleanup(&csi2rx->subdev);
> media_entity_cleanup(&csi2rx->subdev.entity);
> kfree(csi2rx);
> }
>
--
Regards,
Laurent Pinchart
More information about the linux-arm-kernel
mailing list