[PATCH 7/7] spi: stm32: add support for stm32h7 SPI slave underrun detection
Valentin Caron
valentin.caron at foss.st.com
Fri Apr 28 05:15:24 PDT 2023
If stm32h7 SPI controller is in slave role and TX FIFO is abnormally empty
during transaction, controller is able to automatically send either a
pattern, the last transmitted data, or the last received data.
Signed-off-by: Valentin Caron <valentin.caron at foss.st.com>
---
drivers/spi/spi-stm32.c | 112 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 112 insertions(+)
diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index 2db6f93654d7..0063c2f69265 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -18,6 +18,7 @@
#include <linux/pm_runtime.h>
#include <linux/reset.h>
#include <linux/spi/spi.h>
+#include <dt-bindings/spi/spi-stm32.h>
#define DRIVER_NAME "spi_stm32"
@@ -84,6 +85,7 @@
#define STM32H7_SPI_IFCR 0x18
#define STM32H7_SPI_TXDR 0x20
#define STM32H7_SPI_RXDR 0x30
+#define STM32H7_SPI_UDRDR 0x4C
#define STM32H7_SPI_I2SCFGR 0x50
/* STM32H7_SPI_CR1 bit fields */
@@ -101,6 +103,14 @@
/* STM32H7_SPI_CFG1 bit fields */
#define STM32H7_SPI_CFG1_DSIZE GENMASK(4, 0)
#define STM32H7_SPI_CFG1_FTHLV GENMASK(8, 5)
+#define STM32H7_SPI_CFG1_UDRDET GENMASK(12, 11)
+#define STM32H7_SPI_CFG1_UDRDET_BEGIN 0
+#define STM32H7_SPI_CFG1_UDRDET_LAST 1
+#define STM32H7_SPI_CFG1_UDRDET_SS 2
+#define STM32H7_SPI_CFG1_UDRCFG GENMASK(10, 9)
+#define STM32H7_SPI_CFG1_UDRCFG_PTRN 0
+#define STM32H7_SPI_CFG1_UDRCFG_LAST_R 1
+#define STM32H7_SPI_CFG1_UDRCFG_LAST_T 2
#define STM32H7_SPI_CFG1_RXDMAEN BIT(14)
#define STM32H7_SPI_CFG1_TXDMAEN BIT(15)
#define STM32H7_SPI_CFG1_MBR GENMASK(30, 28)
@@ -126,6 +136,7 @@
#define STM32H7_SPI_IER_DXPIE BIT(2)
#define STM32H7_SPI_IER_EOTIE BIT(3)
#define STM32H7_SPI_IER_TXTFIE BIT(4)
+#define STM32H7_SPI_IER_UDRIE BIT(5)
#define STM32H7_SPI_IER_OVRIE BIT(6)
#define STM32H7_SPI_IER_MODFIE BIT(9)
#define STM32H7_SPI_IER_ALL GENMASK(10, 0)
@@ -134,6 +145,7 @@
#define STM32H7_SPI_SR_RXP BIT(0)
#define STM32H7_SPI_SR_TXP BIT(1)
#define STM32H7_SPI_SR_EOT BIT(3)
+#define STM32H7_SPI_SR_UDR BIT(5)
#define STM32H7_SPI_SR_OVR BIT(6)
#define STM32H7_SPI_SR_MODF BIT(9)
#define STM32H7_SPI_SR_SUSP BIT(11)
@@ -239,6 +251,8 @@ struct stm32_spi;
* @baud_rate_div_max: maximum baud rate divisor
* @has_fifo: boolean to know if fifo is used for driver
* @flags: compatible specific SPI controller flags used at registration time
+ * @set_slave_udr: routine to configure registers to desired slave underrun
+ * behavior (if driver has this functionality)
*/
struct stm32_spi_cfg {
const struct stm32_spi_regspec *regs;
@@ -260,6 +274,7 @@ struct stm32_spi_cfg {
unsigned int baud_rate_div_max;
bool has_fifo;
u16 flags;
+ void (*set_slave_udr)(struct stm32_spi *spi);
};
/**
@@ -288,6 +303,8 @@ struct stm32_spi_cfg {
* @dma_rx: dma channel for RX transfer
* @phys_addr: SPI registers physical base address
* @slave_mode: the controller is configured as SPI slave
+ * @slave_udr_mode: slave underrun behavior
+ * @slave_udr_pattern: slave underrun pattern parameter
*/
struct stm32_spi {
struct device *dev;
@@ -317,6 +334,8 @@ struct stm32_spi {
dma_addr_t phys_addr;
bool slave_mode;
+ u32 slave_udr_mode;
+ u32 slave_udr_pattern;
};
static const struct stm32_spi_regspec stm32f4_spi_regspec = {
@@ -921,6 +940,14 @@ static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id)
end = true;
}
+ if (sr & STM32H7_SPI_SR_UDR) {
+ static DEFINE_RATELIMIT_STATE(rs,
+ DEFAULT_RATELIMIT_INTERVAL * 10,
+ 1);
+ if (__ratelimit(&rs))
+ dev_dbg_ratelimited(spi->dev, "Underrun detected\n");
+ }
+
if (sr & STM32H7_SPI_SR_EOT) {
if (!spi->cur_usedma && (spi->rx_buf && (spi->rx_len > 0)))
stm32h7_spi_read_rxfifo(spi);
@@ -1178,6 +1205,9 @@ static int stm32h7_spi_transfer_one_irq(struct stm32_spi *spi)
if (spi->tx_buf)
stm32h7_spi_write_txfifo(spi);
+ if (STM32_SPI_SLAVE_MODE(spi) && spi->slave_udr_mode != SPI_NO_ACTION)
+ ier |= STM32H7_SPI_IER_UDRIE;
+
if (STM32_SPI_MASTER_MODE(spi))
stm32_spi_set_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_CSTART);
@@ -1222,6 +1252,9 @@ static void stm32h7_spi_transfer_one_dma_start(struct stm32_spi *spi)
if (spi->cur_comm == SPI_SIMPLEX_TX || spi->cur_comm == SPI_3WIRE_TX)
ier |= STM32H7_SPI_IER_EOTIE | STM32H7_SPI_IER_TXTFIE;
+ if (STM32_SPI_SLAVE_MODE(spi) && spi->slave_udr_mode != SPI_NO_ACTION)
+ ier |= STM32H7_SPI_IER_UDRIE;
+
stm32_spi_set_bits(spi, STM32H7_SPI_IER, ier);
stm32_spi_enable(spi);
@@ -1530,6 +1563,53 @@ static int stm32h7_spi_number_of_data(struct stm32_spi *spi, u32 nb_words)
return 0;
}
+/**
+ * stm32h7_spi_set_slave_udr - configure slave underrun detection and reaction
+ * @spi: pointer to the spi controller data structure
+ */
+static void stm32h7_spi_set_slave_udr(struct stm32_spi *spi)
+{
+ u32 max_udr_ptrn, udr_ptrn, cfg1_setb = 0;
+
+ if (spi->slave_udr_mode == SPI_NO_ACTION)
+ return;
+
+ switch (spi->slave_udr_mode) {
+ case SPI_SEND_PATTERN:
+ max_udr_ptrn = (1 << spi->cur_bpw) - 1;
+ if (spi->slave_udr_pattern > max_udr_ptrn) {
+ udr_ptrn = spi->slave_udr_pattern & max_udr_ptrn;
+ dev_warn(spi->dev,
+ "force slave underrun pattern to data width (> 0x%x, set 0x%x)\n",
+ max_udr_ptrn, udr_ptrn);
+ } else {
+ udr_ptrn = spi->slave_udr_pattern;
+ dev_dbg(spi->dev, "spi slave underrun: send pattern (0x%x)\n",
+ spi->slave_udr_pattern);
+ }
+ writel_relaxed(udr_ptrn, spi->base + STM32H7_SPI_UDRDR);
+ cfg1_setb |= FIELD_PREP(STM32H7_SPI_CFG1_UDRCFG, STM32H7_SPI_CFG1_UDRCFG_PTRN);
+ break;
+ case SPI_REPEAT_LAST_RECEIVED_DATA:
+ cfg1_setb |= FIELD_PREP(STM32H7_SPI_CFG1_UDRCFG, STM32H7_SPI_CFG1_UDRCFG_LAST_R);
+ dev_dbg(spi->dev, "spi slave underrun: repeat received data\n");
+ break;
+ case SPI_REPEAT_LAST_TRANSMITTED_DATA:
+ cfg1_setb |= FIELD_PREP(STM32H7_SPI_CFG1_UDRCFG, STM32H7_SPI_CFG1_UDRCFG_LAST_T);
+ dev_dbg(spi->dev, "spi slave underrun: repeat transmitted data\n");
+ break;
+ default:
+ dev_warn(spi->dev, "slave underrun detection disabled\n");
+ spi->slave_udr_mode = SPI_NO_ACTION;
+ }
+
+ if (spi->slave_udr_mode != SPI_NO_ACTION) {
+ cfg1_setb |= FIELD_PREP(STM32H7_SPI_CFG1_UDRDET, STM32H7_SPI_CFG1_UDRDET_LAST);
+
+ stm32_spi_set_bits(spi, STM32H7_SPI_CFG1, cfg1_setb);
+ }
+}
+
/**
* stm32_spi_transfer_one_setup - common setup to transfer a single
* spi_transfer either using DMA or
@@ -1591,6 +1671,9 @@ static int stm32_spi_transfer_one_setup(struct stm32_spi *spi,
goto out;
}
+ if (STM32_SPI_SLAVE_MODE(spi) && spi->cfg->set_slave_udr)
+ spi->cfg->set_slave_udr(spi);
+
dev_dbg(spi->dev, "transfer communication mode set to %d\n",
spi->cur_comm);
dev_dbg(spi->dev,
@@ -1774,6 +1857,7 @@ static const struct stm32_spi_cfg stm32h7_spi_cfg = {
.baud_rate_div_min = STM32H7_SPI_MBR_DIV_MIN,
.baud_rate_div_max = STM32H7_SPI_MBR_DIV_MAX,
.has_fifo = true,
+ .set_slave_udr = stm32h7_spi_set_slave_udr,
};
static const struct of_device_id stm32_spi_of_match[] = {
@@ -1789,6 +1873,31 @@ static int stm32h7_spi_slave_abort(struct spi_controller *ctrl)
return 0;
}
+static void stm32h7_spi_parse_slave_config(struct stm32_spi *spi, struct device_node *np)
+{
+ u32 udr_configs[2] = { 0, 0 };
+ int count, ret;
+
+ count = of_property_count_elems_of_size(np, "st,spi-slave-underrun", sizeof(u32));
+ if (count <= 0) {
+ if (count != -EINVAL)
+ dev_err(spi->dev, "Invalid st,spi-slave-underrun property\n");
+ return;
+ }
+
+ ret = of_property_read_u32_array(np, "st,spi-slave-underrun", udr_configs, count);
+ if (ret)
+ return;
+
+ spi->slave_udr_mode = udr_configs[0];
+ if (spi->slave_udr_mode == SPI_SEND_PATTERN) {
+ if (count > 1)
+ spi->slave_udr_pattern = udr_configs[1];
+ else
+ dev_warn(spi->dev, "Missing pattern in st,spi-slave-underrun property\n");
+ }
+}
+
static int stm32_spi_probe(struct platform_device *pdev)
{
struct spi_controller *ctrl;
@@ -1842,6 +1951,9 @@ static int stm32_spi_probe(struct platform_device *pdev)
return ret;
}
+ if (STM32_SPI_SLAVE_MODE(spi))
+ stm32h7_spi_parse_slave_config(spi, np);
+
spi->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(spi->clk)) {
ret = PTR_ERR(spi->clk);
--
2.25.1
More information about the linux-arm-kernel
mailing list