[PATCH 3/7] spi: stm32: use dmaengine_terminate_{a}sync instead of _all

[Valentin Caron]

From: Alain Volmat <alain.volmat at foss.st.com>

Avoid usage of deprecated dmaengine_terminate_all and use
dmaengine_terminate_sync and dmaengine_terminate_async instead.

Signed-off-by: Alain Volmat <alain.volmat at foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron at foss.st.com>
---
 drivers/spi/spi-stm32.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index 5d9439ae1c09..82fbd20e8a96 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -657,9 +657,9 @@ static void stm32f4_spi_disable(struct stm32_spi *spi)
 	}
 
 	if (spi->cur_usedma && spi->dma_tx)
-		dmaengine_terminate_all(spi->dma_tx);
+		dmaengine_terminate_async(spi->dma_tx);
 	if (spi->cur_usedma && spi->dma_rx)
-		dmaengine_terminate_all(spi->dma_rx);
+		dmaengine_terminate_async(spi->dma_rx);
 
 	stm32_spi_clr_bits(spi, STM32F4_SPI_CR1, STM32F4_SPI_CR1_SPE);
 
@@ -696,9 +696,9 @@ static void stm32h7_spi_disable(struct stm32_spi *spi)
 	}
 
 	if (spi->cur_usedma && spi->dma_tx)
-		dmaengine_terminate_all(spi->dma_tx);
+		dmaengine_terminate_async(spi->dma_tx);
 	if (spi->cur_usedma && spi->dma_rx)
-		dmaengine_terminate_all(spi->dma_rx);
+		dmaengine_terminate_async(spi->dma_rx);
 
 	stm32_spi_clr_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_SPE);
 
@@ -1302,7 +1302,7 @@ static int stm32_spi_transfer_one_dma(struct stm32_spi *spi,
 
 dma_submit_error:
 	if (spi->dma_rx)
-		dmaengine_terminate_all(spi->dma_rx);
+		dmaengine_terminate_sync(spi->dma_rx);
 
 dma_desc_error:
 	stm32_spi_clr_bits(spi, spi->cfg->regs->dma_rx_en.reg,
-- 
2.25.1