[PATCH 05/11] arm64: dts: ti: k3-am65: Enable ECAP nodes at the board level

Andrew Davis afd at ti.com
Fri Oct 28 07:24:11 PDT 2022


ECAP nodes defined in the top-level AM65x SoC dtsi files are incomplete
and will not be functional unless they are extended with pinmux
information. (These and the EPWM nodes could be used to trigger internal
actions but they are not used like that currently)

As the pinmux is only known at the board integration level, these
nodes should only be enabled when provided with this information.

Disable the ECAP nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.

Signed-off-by: Andrew Davis <afd at ti.com>
---
 arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi | 1 +
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi           | 1 +
 arch/arm64/boot/dts/ti/k3-am654-base-board.dts     | 1 +
 3 files changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index fa4b6eb02fa57..56562081a8e52 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -550,6 +550,7 @@ &mcu_cpsw {
 };
 
 &ecap0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&ecap0_pins_default>;
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 49287f8493aea..fbb631c7664d2 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -205,6 +205,7 @@ ecap0: pwm at 3100000 {
 		power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 39 0>;
 		clock-names = "fck";
+		status = "disabled";
 	};
 
 	main_spi0: spi at 2100000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 3f5a5ebfc8f3c..f4b8747ebaef6 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -337,6 +337,7 @@ &main_i2c2 {
 };
 
 &ecap0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&ecap0_pins_default>;
 };
-- 
2.37.3




More information about the linux-arm-kernel mailing list