[PATCH 2/3] arm64: dts: imx8qxp-ai_ml: Remove invalid linux,default-trigger

[Fabio Estevam]

From: Fabio Estevam <festevam at denx.de>

"none", "phy0tx" and "hci0-power" are not valid values for the
linux,default-trigger property and trigger the following warnings when
running:

make dtbs_check DT_SCHEMA_FILES=leds-gpio.yaml

  DTC_CHK arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dtb
arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dtb: leds: user-led2:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
	'none' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
	'none' does not match '^mmc[0-9]+$'
	'none' does not match '^cpu[0-9]*$'
	From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml
arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dtb: leds: user-led4:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
	'none' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
	'none' does not match '^mmc[0-9]+$'
	'none' does not match '^cpu[0-9]*$'
	From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml
arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dtb: leds: wlan-active-led:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
	'phy0tx' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
	'phy0tx' does not match '^mmc[0-9]+$'
	'phy0tx' does not match '^cpu[0-9]*$'
	From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml
arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dtb: leds: bt-active-led:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
	'hci0-power' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
	'hci0-power' does not match '^mmc[0-9]+$'
	'hci0-power' does not match '^cpu[0-9]*$'
	From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml

Remove the invalid linux,default-trigger entries.

Cc: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
Fixes: 56838644f9dd ("arm64: dts: freescale: Add support for i.MX8QXP AI_ML board")
Signed-off-by: Fabio Estevam <festevam at denx.de>
---
 arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts
index 7d00e17f0447..233dea6dde22 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts
@@ -41,7 +41,6 @@ user-led1 {
 		user-led2 {
 			label = "green:user2";
 			gpios = <&lsio_gpio0 6 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "none";
 		};
 
 		user-led3 {
@@ -55,20 +54,17 @@ user-led4 {
 			label = "green:user4";
 			gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>;
 			panic-indicator;
-			linux,default-trigger = "none";
 		};
 
 		wlan-active-led {
 			label = "yellow:wlan";
 			gpios = <&lsio_gpio4 17 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy0tx";
 			default-state = "off";
 		};
 
 		bt-active-led {
 			label = "blue:bt";
 			gpios = <&lsio_gpio4 18 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "hci0-power";
 			default-state = "off";
 		};
 	};
-- 
2.25.1