[PATCH 1/3] arm64: dts: imx8mq-thor96: Remove invalid linux,default-trigger

[Fabio Estevam]

From: Fabio Estevam <festevam at denx.de>

"none", "phy0tx" and "hci0-power" are not valid values for the
linux,default-trigger property and trigger the following warnings when
running:

make dtbs_check DT_SCHEMA_FILES=leds-gpio.yaml

arch/arm64/boot/dts/freescale/imx8mq-thor96.dtb: leds: user-led4:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
	'none' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
	'none' does not match '^mmc[0-9]+$'
	'none' does not match '^cpu[0-9]*$'
	From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml
arch/arm64/boot/dts/freescale/imx8mq-thor96.dtb: leds: wlan-active-led:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
	'phy0tx' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
	'phy0tx' does not match '^mmc[0-9]+$'
	'phy0tx' does not match '^cpu[0-9]*$'
	From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml
arch/arm64/boot/dts/freescale/imx8mq-thor96.dtb: leds: bt-active-led:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
	'hci0-power' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern']
	'hci0-power' does not match '^mmc[0-9]+$'
	'hci0-power' does not match '^cpu[0-9]*$'
	From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml

Remove the invalid linux,default-trigger entries.

Cc: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
Fixes: 68ca364d4812 ("arm64: dts: freescale: Add devicetree support for Thor96 board")
Signed-off-by: Fabio Estevam <festevam at denx.de>
---
 arch/arm64/boot/dts/freescale/imx8mq-thor96.dts | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
index 5d5aa6537225..170e00c2447f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
@@ -35,7 +35,6 @@ user-led1 {
 		user-led2 {
 			label = "green:user2";
 			gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "none";
 		};
 
 		user-led3 {
@@ -49,20 +48,17 @@ user-led4 {
 			label = "green:user4";
 			gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
 			panic-indicator;
-			linux,default-trigger = "none";
 		};
 
 		wlan-active-led {
 			label = "yellow:wlan";
 			gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy0tx";
 			default-state = "off";
 		};
 
 		bt-active-led {
 			label = "blue:bt";
 			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "hci0-power";
 			default-state = "off";
 		};
 	};
-- 
2.25.1