[PATCH v5 net-next 0/3] net: axienet: Use a DT property to configure frequency of the MDIO bus

[patchwork-bot+netdevbpf at kernel.org]

Hello:

This series was applied to netdev/net-next.git (master)
by David S. Miller <davem at davemloft.net>:

On Thu, 17 Nov 2022 23:40:11 +0800 you wrote:
> Some FPGA platforms have to set frequency of the MDIO bus lower than 2.5
> MHz. Thus, we use a DT property, which is "clock-frequency", to work
> with it at boot time. The default 2.5 MHz would be set if the property
> is not pressent. Also, factor out mdio enable/disable functions due to
> the api change since 253761a0e61b7.
> 
> Changelog:
> 
> [...]

Here is the summary with links:
  - [v5,net-next,1/3] net: axienet: Unexport and remove unused mdio functions
    https://git.kernel.org/netdev/net-next/c/29f8eefba3ba
  - [v5,net-next,2/3] dt-bindings: describe the support of "clock-frequency" in mdio
    https://git.kernel.org/netdev/net-next/c/6830604ec0c7
  - [v5,net-next,3/3] net: axienet: set mdio clock according to bus-frequency
    https://git.kernel.org/netdev/net-next/c/2e1f2c1066c1

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html