[PATCH v6 09/10] arm64: dts: mediatek: Add MediaTek CCI node for MT8183
Rex-BC Chen
rex-bc.chen at mediatek.com
Mon May 16 03:41:31 PDT 2022
On Mon, 2022-05-16 at 13:35 +0800, Chen-Yu Tsai wrote:
> On Thu, May 5, 2022 at 8:04 PM Rex-BC Chen <rex-bc.chen at mediatek.com>
> wrote:
> >
> > Add MediaTek CCI devfreq node for MT8183.
> >
> > Signed-off-by: Andrew-sh.Cheng <andrew-sh.cheng at mediatek.com>
> > Signed-off-by: Rex-BC Chen <rex-bc.chen at mediatek.com>
> > Reviewed-by: AngeloGioacchino Del Regno <
> > angelogioacchino.delregno at collabora.com>
> > ---
> > arch/arm64/boot/dts/mediatek/mt8183-evb.dts | 4 ++++
> > arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 4 ++++
> > arch/arm64/boot/dts/mediatek/mt8183.dtsi | 7 +++++++
> > 3 files changed, 15 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
> > b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
> > index 8953dbf84f3e..7ac9864db9de 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
> > +++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
> > @@ -412,6 +412,10 @@
> >
> > };
> >
> > +&cci {
> > + proc-supply = <&mt6358_vproc12_reg>;
> > +};
> > +
> > &cpu0 {
> > proc-supply = <&mt6358_vproc12_reg>;
> > };
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> > b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> > index 8d5bf73a9099..b035e06840e6 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> > @@ -230,6 +230,10 @@
> > status = "okay";
> > };
> >
> > +&cci {
> > + proc-supply = <&mt6358_vproc12_reg>;
> > +};
> > +
> > &cpu0 {
> > proc-supply = <&mt6358_vproc12_reg>;
> > };
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > index cecf96b628b7..11caf3dd85cd 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > @@ -280,6 +280,13 @@
> > };
> > };
> >
> > + cci: cci {
> > + compatible = "mediatek,mt8183-cci";
> > + clocks = <&apmixedsys CLK_APMIXED_CCIPLL>;
> > + clock-names = "cci_clock";
>
> Binding says there should be two clocks: the actual clock that drives
> CCI, and a stable "intermediate" clock to switch to during clock rate
> changes. So I think this should look like:
>
> clocks = <&mcucfg CLK_MCU_BUS_SEL>,
> <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>;
> clock-names = "cci", "intermediate";
>
>
> ChenYu
>
Hello Chen-Yu,
Thanks for your reminder.
I will update this and sned next version.
BRs,
Rex
> > + operating-points-v2 = <&cci_opp>;
> > + };
> > +
> > cpus {
> > #address-cells = <1>;
> > #size-cells = <0>;
> > --
> > 2.18.0
> >
> >
> > _______________________________________________
> > Linux-mediatek mailing list
> > Linux-mediatek at lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-mediatek
More information about the linux-arm-kernel
mailing list