[PATCH v6 09/10] arm64: dts: mediatek: Add MediaTek CCI node for MT8183

Chen-Yu Tsai wenst at chromium.org
Sun May 15 22:35:18 PDT 2022


On Thu, May 5, 2022 at 8:04 PM Rex-BC Chen <rex-bc.chen at mediatek.com> wrote:
>
> Add MediaTek CCI devfreq node for MT8183.
>
> Signed-off-by: Andrew-sh.Cheng <andrew-sh.cheng at mediatek.com>
> Signed-off-by: Rex-BC Chen <rex-bc.chen at mediatek.com>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
> ---
>  arch/arm64/boot/dts/mediatek/mt8183-evb.dts    | 4 ++++
>  arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 4 ++++
>  arch/arm64/boot/dts/mediatek/mt8183.dtsi       | 7 +++++++
>  3 files changed, 15 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
> index 8953dbf84f3e..7ac9864db9de 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
> @@ -412,6 +412,10 @@
>
>  };
>
> +&cci {
> +       proc-supply = <&mt6358_vproc12_reg>;
> +};
> +
>  &cpu0 {
>         proc-supply = <&mt6358_vproc12_reg>;
>  };
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> index 8d5bf73a9099..b035e06840e6 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> @@ -230,6 +230,10 @@
>         status = "okay";
>  };
>
> +&cci {
> +       proc-supply = <&mt6358_vproc12_reg>;
> +};
> +
>  &cpu0 {
>         proc-supply = <&mt6358_vproc12_reg>;
>  };
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> index cecf96b628b7..11caf3dd85cd 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> @@ -280,6 +280,13 @@
>                 };
>         };
>
> +       cci: cci {
> +               compatible = "mediatek,mt8183-cci";
> +               clocks = <&apmixedsys CLK_APMIXED_CCIPLL>;
> +               clock-names = "cci_clock";

Binding says there should be two clocks: the actual clock that drives
CCI, and a stable "intermediate" clock to switch to during clock rate
changes. So I think this should look like:

    clocks = <&mcucfg CLK_MCU_BUS_SEL>,
             <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>;
    clock-names = "cci", "intermediate";


ChenYu

> +               operating-points-v2 = <&cci_opp>;
> +       };
> +
>         cpus {
>                 #address-cells = <1>;
>                 #size-cells = <0>;
> --
> 2.18.0
>
>
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek



More information about the linux-arm-kernel mailing list