(EXT) [PATCH v3 5/7] arm64: dts: imx8mp: add HSIO power-domains

[Alexander Stein]

Am Montag, 28. Februar 2022, 21:17:29 CET schrieb Lucas Stach:
> This adds the GPC and HSIO blk-ctrl nodes providing power control for
> the high-speed (USB and PCIe) IOs.
> 
> Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
> Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> ---
>  arch/arm64/boot/dts/freescale/imx8mp.dtsi | 71 +++++++++++++++++++++--
>  1 file changed, 65 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index
> 6b840c05dd77..69e533add539 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> @@ -4,6 +4,7 @@
>   */
> 
>  #include <dt-bindings/clock/imx8mp-clock.h>
> +#include <dt-bindings/power/imx8mp-power.h>
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/input/input.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
> @@ -475,6 +476,44 @@ src: reset-controller at 30390000 {
>  				interrupts = <GIC_SPI 89 
IRQ_TYPE_LEVEL_HIGH>;
>  				#reset-cells = <1>;
>  			};
> +
> +			gpc: gpc at 303a0000 {
> +				compatible = "fsl,imx8mp-gpc";
> +				reg = <0x303a0000 0x1000>;
> +				interrupt-parent = <&gic>;
> +				interrupt-controller;
> +				#interrupt-cells = <3>;
> +
> +				pgc {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					pgc_pcie_phy: power-
domain at 1 {
> +						#power-
domain-cells = <0>;
> +						reg = 
<IMX8MP_POWER_DOMAIN_PCIE_PHY>;
> +					};
> +
> +					pgc_usb1_phy: power-
domain at 2 {
> +						#power-
domain-cells = <0>;
> +						reg = 
<IMX8MP_POWER_DOMAIN_USB1_PHY>;
> +					};
> +
> +					pgc_usb2_phy: power-
domain at 3 {
> +						#power-
domain-cells = <0>;
> +						reg = 
<IMX8MP_POWER_DOMAIN_USB2_PHY>;
> +					};
> +
> +					pgc_hsiomix: power-
domains at 17 {
> +						#power-
domain-cells = <0>;
> +						reg = 
<IMX8MP_POWER_DOMAIN_HSIOMIX>;
> +						clocks = 
<&clk IMX8MP_CLK_HSIO_AXI>,
> +							 
<&clk IMX8MP_CLK_HSIO_ROOT>;
> +						assigned-
clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
> +						assigned-
clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
> +						assigned-
clock-rates = <500000000>;
> +					};
> +				};
> +			};
>  		};
> 
>  		aips2: bus at 30400000 {
> @@ -892,6 +931,28 @@ eqos: ethernet at 30bf0000 {
>  			};
>  		};
> 
> +		aips4 {
> +			compatible = "fsl,aips-bus", "simple-bus";
> +			reg = <0x32c00000 0x400000>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +
> +			hsio_blk_ctrl: blk-ctrl at 32f10000 {
> +				compatible = "fsl,imx8mp-hsio-blk-
ctrl", "syscon";
> +				reg = <0x32f10000 0x24>;
> +				clocks = <&clk 
IMX8MP_CLK_USB_ROOT>,
> +					 <&clk 
IMX8MP_CLK_PCIE_ROOT>;
> +				clock-names = "usb", "pcie";
> +				power-domains = <&pgc_hsiomix>, 
<&pgc_hsiomix>,
> +						
<&pgc_usb1_phy>, <&pgc_usb2_phy>,
> +						
<&pgc_hsiomix>, <&pgc_pcie_phy>;
> +				power-domain-names = "bus", "usb", 
"usb-phy1",
> +						     "usb-
phy2", "pcie", "pcie-phy";
> +				#power-domain-cells = <1>;
> +			};
> +		};
> +
>  		gic: interrupt-controller at 38800000 {
>  			compatible = "arm,gic-v3";
>  			reg = <0x38800000 0x10000>,
> @@ -915,6 +976,7 @@ usb3_phy0: usb-phy at 381f0040 {
>  			clock-names = "phy";
>  			assigned-clocks = <&clk 
IMX8MP_CLK_USB_PHY_REF>;
>  			assigned-clock-parents = <&clk 
IMX8MP_CLK_24M>;
> +			power-domains = <&hsio_blk_ctrl 
IMX8MP_HSIOBLK_PD_USB_PHY1>;
>  			#phy-cells = <0>;
>  			status = "disabled";
>  		};
> @@ -926,6 +988,7 @@ usb3_0: usb at 32f10100 {
>  				 <&clk IMX8MP_CLK_USB_ROOT>;
>  			clock-names = "hsio", "suspend";
>  			interrupts = <GIC_SPI 148 
IRQ_TYPE_LEVEL_HIGH>;
> +			power-domains = <&hsio_blk_ctrl 
IMX8MP_HSIOBLK_PD_USB>;
>  			#address-cells = <1>;
>  			#size-cells = <1>;
>  			dma-ranges = <0x40000000 0x40000000 
0xc0000000>;
> @@ -939,9 +1002,6 @@ usb_dwc3_0: usb at 38100000 {
>  					 <&clk 
IMX8MP_CLK_USB_CORE_REF>,
>  					 <&clk 
IMX8MP_CLK_USB_ROOT>;
>  				clock-names = "bus_early", "ref", 
"suspend";
> -				assigned-clocks = <&clk 
IMX8MP_CLK_HSIO_AXI>;
> -				assigned-clock-parents = <&clk 
IMX8MP_SYS_PLL2_500M>;
> -				assigned-clock-rates = 
<500000000>;
>  				interrupts = <GIC_SPI 40 
IRQ_TYPE_LEVEL_HIGH>;
>  				phys = <&usb3_phy0>, <&usb3_phy0>;
>  				phy-names = "usb2-phy", "usb3-
phy";
> @@ -957,6 +1017,7 @@ usb3_phy1: usb-phy at 382f0040 {
>  			clock-names = "phy";
>  			assigned-clocks = <&clk 
IMX8MP_CLK_USB_PHY_REF>;
>  			assigned-clock-parents = <&clk 
IMX8MP_CLK_24M>;
> +			power-domains = <&hsio_blk_ctrl 
IMX8MP_HSIOBLK_PD_USB_PHY2>;
>  			#phy-cells = <0>;
>  		};
> 
> @@ -967,6 +1028,7 @@ usb3_1: usb at 32f10108 {
>  				 <&clk IMX8MP_CLK_USB_ROOT>;
>  			clock-names = "hsio", "suspend";
>  			interrupts = <GIC_SPI 149 
IRQ_TYPE_LEVEL_HIGH>;
> +			power-domains = <&hsio_blk_ctrl 
IMX8MP_HSIOBLK_PD_USB>;
>  			#address-cells = <1>;
>  			#size-cells = <1>;
>  			dma-ranges = <0x40000000 0x40000000 
0xc0000000>;
> @@ -980,9 +1042,6 @@ usb_dwc3_1: usb at 38200000 {
>  					 <&clk 
IMX8MP_CLK_USB_CORE_REF>,
>  					 <&clk 
IMX8MP_CLK_USB_ROOT>;
>  				clock-names = "bus_early", "ref", 
"suspend";
> -				assigned-clocks = <&clk 
IMX8MP_CLK_HSIO_AXI>;
> -				assigned-clock-parents = <&clk 
IMX8MP_SYS_PLL2_500M>;
> -				assigned-clock-rates = 
<500000000>;
>  				interrupts = <GIC_SPI 41 
IRQ_TYPE_LEVEL_HIGH>;
>  				phys = <&usb3_phy1>, <&usb3_phy1>;
>  				phy-names = "usb2-phy", "usb3-
phy";


Tested-by: Alexander Stein <alexander.stein at ew.tq-group.com>