[PATCH v2 2/2] dt-bindings: mediatek: Add assigned clock property and axi clock in example

[Krzysztof Kozlowski]

On 30/06/2022 11:01, Xiangsheng Hou wrote:
> For mt8173, it is needed to add the axi clock for dma mode.
> And it is may needed to adjust default spi frequency.
> 
> Signed-off-by: Xiangsheng Hou <xiangsheng.hou at mediatek.com>
> ---
>  .../devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml  | 10 ++++++++--
>  1 file changed, 8 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml
> index 41e60fe4b09f..7523d992a614 100644
> --- a/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml
> +++ b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml
> @@ -61,6 +61,12 @@ properties:
>        - const: axi
>        - const: axi_s
>  
> +  assigned-clocks:
> +    maxItems: 1
> +
> +  assigned-clock-parents:
> +    maxItems: 1
> +

There is usually no reason to put this in the bindings.

>  required:
>    - compatible
>    - reg
> @@ -82,8 +88,8 @@ examples:
>          compatible = "mediatek,mt8173-nor";
>          reg = <0 0x1100d000 0 0xe0>;
>          interrupts = <1>;
> -        clocks = <&pericfg CLK_PERI_SPI>, <&topckgen CLK_TOP_SPINFI_IFR_SEL>;
> -        clock-names = "spi", "sf";
> +        clocks = <&pericfg CLK_PERI_SPI>, <&topckgen CLK_TOP_SPINFI_IFR_SEL>, <&pericfg CLK_PERI_NFI>;
> +        clock-names = "spi", "sf", "axi";
>          #address-cells = <1>;
>          #size-cells = <0>;
>  


Best regards,
Krzysztof