[PATCH] mmc: sdhci-of-at91: fix set_uhs_signaling rewriting of MC1R

[Eugen Hristev]

In set_uhs_signaling, the DDR bit is being set by fully writing the MC1R
register.
This can lead to accidental erase of certain bits in this register.
Avoid this by doing a read-modify-write operation.

Fixes: d0918764c17b ("mmc: sdhci-of-at91: fix MMC_DDR_52 timing selection")
Signed-off-by: Eugen Hristev <eugen.hristev at microchip.com>
Tested-by: Karl Olsen <karl at micro-technic.com>
---
 drivers/mmc/host/sdhci-of-at91.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c
index 10fb4cb2c731..cd0134580a90 100644
--- a/drivers/mmc/host/sdhci-of-at91.c
+++ b/drivers/mmc/host/sdhci-of-at91.c
@@ -100,8 +100,13 @@ static void sdhci_at91_set_clock(struct sdhci_host *host, unsigned int clock)
 static void sdhci_at91_set_uhs_signaling(struct sdhci_host *host,
 					 unsigned int timing)
 {
-	if (timing == MMC_TIMING_MMC_DDR52)
-		sdhci_writeb(host, SDMMC_MC1R_DDR, SDMMC_MC1R);
+	u8 mc1r;
+
+	if (timing == MMC_TIMING_MMC_DDR52) {
+		mc1r = sdhci_readb(host, SDMMC_MC1R);
+		mc1r |= SDMMC_MC1R_DDR;
+		sdhci_writeb(host, mc1r, SDMMC_MC1R);
+	}
 	sdhci_set_uhs_signaling(host, timing);
 }
 
-- 
2.25.1