[PATCH] ARM: dts: rza2mevb: Fix LED node names

[Kieran Bingham]

Quoting Geert Uytterhoeven (2022-06-15 15:01:10)
> "make dtbs_check":
> 
>     arch/arm/boot/dts/r7s9210-rza2mevb.dtb: leds: 'green', 'red' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
>             From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml
> 
> Fix this by prefixing the LED node names with "led-".
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>


Reviewed-by: Kieran Bingham <kieran.bingham+renesas at ideasonboard.com>

> ---
> To be queued in renesas-devel for v5.20.
> 
>  arch/arm/boot/dts/r7s9210-rza2mevb.dts | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/r7s9210-rza2mevb.dts b/arch/arm/boot/dts/r7s9210-rza2mevb.dts
> index 9c0d9686fe01133b..69a5a44b8a2fdd74 100644
> --- a/arch/arm/boot/dts/r7s9210-rza2mevb.dts
> +++ b/arch/arm/boot/dts/r7s9210-rza2mevb.dts
> @@ -71,10 +71,10 @@ lbsc {
>         leds {
>                 compatible = "gpio-leds";
>  
> -               red {
> +               led-red {
>                         gpios = <&pinctrl RZA2_PIN(PORT6, 0) GPIO_ACTIVE_HIGH>;
>                 };
> -               green {
> +               led-green {
>                         gpios = <&pinctrl RZA2_PIN(PORTC, 1) GPIO_ACTIVE_HIGH>;
>                 };
>         };
> -- 
> 2.25.1
>