[PATCH] ARM: dts: rza2mevb: Fix LED node names

[Geert Uytterhoeven]

"make dtbs_check":

    arch/arm/boot/dts/r7s9210-rza2mevb.dtb: leds: 'green', 'red' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
	    From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml

Fix this by prefixing the LED node names with "led-".

Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
---
To be queued in renesas-devel for v5.20.

 arch/arm/boot/dts/r7s9210-rza2mevb.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r7s9210-rza2mevb.dts b/arch/arm/boot/dts/r7s9210-rza2mevb.dts
index 9c0d9686fe01133b..69a5a44b8a2fdd74 100644
--- a/arch/arm/boot/dts/r7s9210-rza2mevb.dts
+++ b/arch/arm/boot/dts/r7s9210-rza2mevb.dts
@@ -71,10 +71,10 @@ lbsc {
 	leds {
 		compatible = "gpio-leds";
 
-		red {
+		led-red {
 			gpios = <&pinctrl RZA2_PIN(PORT6, 0) GPIO_ACTIVE_HIGH>;
 		};
-		green {
+		led-green {
 			gpios = <&pinctrl RZA2_PIN(PORTC, 1) GPIO_ACTIVE_HIGH>;
 		};
 	};
-- 
2.25.1