[PATCH] dma: imx-sdma: Add FIFO offset support for multi FIFO script

[Vinod Koul]

On 02-06-22, 17:53, Shengjiu Wang wrote:

subsystem tag should be dmaengine

> The peripheral may have several FIFOs, but some case just select
> some FIFOs from them for data transfer, which means FIFO0 and FIFO2
> may be selected. So add FIFO address offset support, 0 means all FIFOs
> are continuous, 1 means 1 word offset between FIFOs. All offset between
> FIFOs should be same.
> 
> Another option words_per_fifo means how many audio channel data copied
> to one FIFO one time, 0 means one channel per FIFO, 1 means 2 channels
> per FIFO.
> 
> If 'n_fifos_src =  4' and 'words_per_fifo = 1', it means the first two
> words(channels) fetch from FIFO0 and then jump to FIFO1 for next two words,
> and so on after the last FIFO3 fetched, roll back to FIFO0.
> 
> Signed-off-by: Joy Zou <joy.zou at nxp.com>
> Signed-off-by: Shengjiu Wang <shengjiu.wang at nxp.com>
> ---
>  drivers/dma/imx-sdma.c      | 26 ++++++++++++++++++++++++--
>  include/linux/dma/imx-dma.h | 13 +++++++++++++
>  2 files changed, 37 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
> index 111beb7138e0..3c95719286bc 100644
> --- a/drivers/dma/imx-sdma.c
> +++ b/drivers/dma/imx-sdma.c
> @@ -183,6 +183,8 @@
>  				 BIT(DMA_DEV_TO_DEV))
>  
>  #define SDMA_WATERMARK_LEVEL_N_FIFOS	GENMASK(15, 12)
> +#define SDMA_WATERMARK_LEVEL_OFF_FIFOS  GENMASK(19, 16)
> +#define SDMA_WATERMARK_LEVEL_WORDS_PER_FIFO   GENMASK(31, 28)
>  #define SDMA_WATERMARK_LEVEL_SW_DONE	BIT(23)
>  
>  #define SDMA_DONE0_CONFIG_DONE_SEL	BIT(7)
> @@ -429,6 +431,9 @@ struct sdma_desc {
>   * @n_fifos_src:	number of source device fifos
>   * @n_fifos_dst:	number of destination device fifos
>   * @sw_done:		software done flag
> + * @off_fifos_src:	offset for source device FIFOs
> + * @off_fifos_dst:	offset for destination device FIFOs

Will both of these be used together...?

> + * @words_per_fifo:	copy number of words one time for one FIFO
>   */
>  struct sdma_channel {
>  	struct virt_dma_chan		vc;
> @@ -456,6 +461,9 @@ struct sdma_channel {
>  	bool				is_ram_script;
>  	unsigned int			n_fifos_src;
>  	unsigned int			n_fifos_dst;
> +	unsigned int			off_fifos_src;
> +	unsigned int			off_fifos_dst;
> +	unsigned int			words_per_fifo;
>  	bool				sw_done;
>  };
>  
> @@ -1245,17 +1253,28 @@ static void sdma_set_watermarklevel_for_p2p(struct sdma_channel *sdmac)
>  static void sdma_set_watermarklevel_for_sais(struct sdma_channel *sdmac)
>  {
>  	unsigned int n_fifos;
> +	unsigned int off_fifos;
> +	unsigned int words_per_fifo;
>  
>  	if (sdmac->sw_done)
>  		sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_SW_DONE;
>  
> -	if (sdmac->direction == DMA_DEV_TO_MEM)
> +	if (sdmac->direction == DMA_DEV_TO_MEM) {
>  		n_fifos = sdmac->n_fifos_src;
> -	else
> +		off_fifos = sdmac->off_fifos_src;
> +	} else {
>  		n_fifos = sdmac->n_fifos_dst;
> +		off_fifos = sdmac->off_fifos_dst;
> +	}
> +
> +	words_per_fifo = sdmac->words_per_fifo;
>  
>  	sdmac->watermark_level |=
>  			FIELD_PREP(SDMA_WATERMARK_LEVEL_N_FIFOS, n_fifos);
> +	sdmac->watermark_level |=
> +			FIELD_PREP(SDMA_WATERMARK_LEVEL_OFF_FIFOS, off_fifos);
> +	sdmac->watermark_level |=
> +			FIELD_PREP(SDMA_WATERMARK_LEVEL_WORDS_PER_FIFO, (words_per_fifo - 1));
>  }
>  
>  static int sdma_config_channel(struct dma_chan *chan)
> @@ -1769,6 +1788,9 @@ static int sdma_config(struct dma_chan *chan,
>  		}
>  		sdmac->n_fifos_src = sdmacfg->n_fifos_src;
>  		sdmac->n_fifos_dst = sdmacfg->n_fifos_dst;
> +		sdmac->off_fifos_src = sdmacfg->off_fifos_src;
> +		sdmac->off_fifos_dst = sdmacfg->off_fifos_dst;
> +		sdmac->words_per_fifo = sdmacfg->words_per_fifo;
>  		sdmac->sw_done = sdmacfg->sw_done;
>  	}
>  
> diff --git a/include/linux/dma/imx-dma.h b/include/linux/dma/imx-dma.h
> index 8887762360d4..0c739d571956 100644
> --- a/include/linux/dma/imx-dma.h
> +++ b/include/linux/dma/imx-dma.h
> @@ -70,6 +70,16 @@ static inline int imx_dma_is_general_purpose(struct dma_chan *chan)
>   * struct sdma_peripheral_config - SDMA config for audio
>   * @n_fifos_src: Number of FIFOs for recording
>   * @n_fifos_dst: Number of FIFOs for playback
> + * @off_fifos_src: FIFO address offset for recording, 0 means all FIFOs are
> + *                 continuous, 1 means 1 word offset between FIFOs. All offset
> + *                 between FIFOs should be same.
> + * @off_fifos_dst: FIFO address offset for playback
> + * @words_per_fifo: numbers of words per FIFO fetch/fill, 0 means
> + *                  one channel per FIFO, 1 means 2 channels per FIFO..
> + *                  If 'n_fifos_src =  4' and 'words_per_fifo = 1', it
> + *                  means the first two words(channels) fetch from FIFO0
> + *                  and then jump to FIFO1 for next two words, and so on
> + *                  after the last FIFO3 fetched, roll back to FIFO0.
>   * @sw_done: Use software done. Needed for PDM (micfil)
>   *
>   * Some i.MX Audio devices (SAI, micfil) have multiple successive FIFO
> @@ -82,6 +92,9 @@ static inline int imx_dma_is_general_purpose(struct dma_chan *chan)
>  struct sdma_peripheral_config {
>  	int n_fifos_src;
>  	int n_fifos_dst;
> +	int off_fifos_src;
> +	int off_fifos_dst;
> +	int words_per_fifo;
>  	bool sw_done;
>  };
>  
> -- 
> 2.17.1

-- 
~Vinod