[PATCH 2/2] ARM: dts: kswitch-d10: enable the USB device port

[Michael Walle]

Hi Claudiu,

Am 2022-07-06 10:41, schrieb Claudiu.Beznea at microchip.com:
> On 05.07.2022 16:06, Michael Walle wrote:
>> EXTERNAL EMAIL: Do not click links or open attachments unless you know 
>> the content is safe
>> 
>> Now that there is driver support for the USB device, enable it.
>> 
>> Signed-off-by: Michael Walle <michael at walle.cc>
>> ---
>>  arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi | 5 +++++
>>  1 file changed, 5 insertions(+)
>> 
>> diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi 
>> b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
>> index 5a6c5f7c371a..d0d26e136c38 100644
>> --- a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
>> +++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
>> @@ -200,6 +200,11 @@ &switch {
>>         status = "okay";
>>  };
>> 
>> +&udc {
>> +       atmel,vbus-gpio = <&gpio 66 GPIO_ACTIVE_HIGH>;
> 
> Can you also add pinctrl to avoid issues described in:

Do I need a pinctrl node even if I just use it as a gpio?
Isn't that handled automatically by the
.gpio_request_enable op?

-michael