[PATCH 06/20] Documention: v4l: Documentation for VP9 CIDs.
Smitha T Murthy
smitha.t at samsung.com
Tue Jul 5 04:26:38 PDT 2022
> -----Original Message-----
> From: Nicolas Dufresne [mailto:nicolas at ndufresne.ca]
> Sent: Tuesday, May 17, 2022 6:44 PM
> To: Smitha T Murthy <smitha.t at samsung.com>; linux-arm-
> kernel at lists.infradead.org; linux-media at vger.kernel.org; linux-
> kernel at vger.kernel.org; devicetree at vger.kernel.org
> Cc: m.szyprowski at samsung.com; andrzej.hajda at intel.com;
> mchehab at kernel.org; hverkuil-cisco at xs4all.nl;
> ezequiel at vanguardiasur.com.ar; jernej.skrabec at gmail.com;
> benjamin.gaignard at collabora.com; stanimir.varbanov at linaro.org;
> dillon.minfei at gmail.com; david.plowman at raspberrypi.com;
> mark.rutland at arm.com; robh+dt at kernel.org; krzk+dt at kernel.org;
> andi at etezian.org; alim.akhtar at samsung.com; aswani.reddy at samsung.com;
> pankaj.dubey at samsung.com; linux-fsd at tesla.com
> Subject: Re: [PATCH 06/20] Documention: v4l: Documentation for VP9 CIDs.
>
> Hi Smitha,
>
> Le mardi 17 mai 2022 à 18:25 +0530, Smitha T Murthy a écrit :
> > Adds V4l2 controls for VP9 encoder documention.
> >
> > Cc: linux-fsd at tesla.com
> > Signed-off-by: Smitha T Murthy <smitha.t at samsung.com>
> > ---
> > .../media/v4l/ext-ctrls-codec.rst | 167 ++++++++++++++++++
> > 1 file changed, 167 insertions(+)
> >
> > diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
> > b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
> > index 4cd7c541fc30..1b617a08f973 100644
> > --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
> > +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
> > @@ -2165,6 +2165,16 @@ enum v4l2_mpeg_video_vp8_profile -
> > * - ``V4L2_MPEG_VIDEO_VP8_PROFILE_3``
> > - Profile 3
> >
> > +VP9 Control Reference
> > +---------------------
> > +
> > +The VP9 controls include controls for encoding parameters of VP9
> > +video codec.
> > +
> > +.. _vp9-control-id:
> > +
> > +VP9 Control IDs
> > +
> > .. _v4l2-mpeg-video-vp9-profile:
> >
> > ``V4L2_CID_MPEG_VIDEO_VP9_PROFILE``
> > @@ -2231,6 +2241,163 @@ enum v4l2_mpeg_video_vp9_level -
> > * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_6_2``
> > - Level 6.2
> >
> > +``V4L2_CID_MPEG_VIDEO_VP9_I_FRAME_QP``
>
> The class was recently renamed V4L2_CID_CODEC... for a reason, can you
> rename MPEG_VIDEO with CODEC, specially for VP9 CODEC were MPEG
> makes no sense. This applies all the doc and the defines in the other patch.
>
> thanks,
> Nicolas
>
Hi Nicholas,
Thank you the review. I will make the change and push in the next series.
Regards,
Smitha
> > + Quantization parameter for an I frame for VP9. Valid range: from 1 to
> 255.
> > +
> > +``V4L2_CID_MPEG_VIDEO_VP9_P_FRAME_QP``
> > + Quantization parameter for an P frame for VP9. Valid range: from 1 to
> 255.
> > +
> > +``V4L2_CID_MPEG_VIDEO_VP9_MAX_QP``
> > + Maximum quantization parameter for VP9. Valid range: from 1 to 255.
> > + Recommended range for MFC is from 230 to 255.
> > +
> > +``V4L2_CID_MPEG_VIDEO_VP9_MIN_QP``
> > + Minimum quantization parameter for VP9. Valid range: from 1 to 255.
> > + Recommended range for MFC is from 1 to 24.
> > +
> > +``V4L2_CID_MPEG_VIDEO_VP9_RC_FRAME_RATE``
> > + Indicates the number of evenly spaced subintervals, called ticks, within
> > + one second. This is a 16 bit unsigned integer and has a maximum value
> up to
> > + 0xffff and a minimum value of 1.
> > +
> > +``V4L2_CID_MPEG_VIDEO_VP9_GF_REFRESH_PERIOD``
> > + Indicates the refresh period of the golden frame for VP9 encoder.
> > +
> > +.. _v4l2-vp9-golden-frame-sel:
> > +
> > +``V4L2_CID_MPEG_VIDEO_VP9_GOLDEN_FRAMESEL``
> > + (enum)
> > +
> > +enum v4l2_mpeg_vp9_golden_framesel -
> > + Selects the golden frame for encoding. Valid when NUM_OF_REF is 2.
> > + Possible values are:
> > +
> > +.. raw:: latex
> > +
> > + \footnotesize
> > +
> > +.. tabularcolumns:: |p{9.0cm}|p{8.0cm}|
> > +
> > +.. flat-table::
> > + :header-rows: 0
> > + :stub-columns: 0
> > +
> > + * - ``V4L2_CID_MPEG_VIDEO_VP9_GOLDEN_FRAME_USE_PREV``
> > + - Use the (n-2)th frame as a golden frame, current frame index being
> > + 'n'.
> > + * -
> ``V4L2_CID_MPEG_VIDEO_VP9_GOLDEN_FRAME_USE_REF_PERIOD``
> > + - Use the previous specific frame indicated by
> > + ``V4L2_CID_MPEG_VIDEO_VP9_GF_REFRESH_PERIOD`` as a
> > + golden frame.
> > +
> > +.. raw:: latex
> > +
> > + \normalsize
> > +
> > +
> > +``V4L2_CID_MPEG_VIDEO_VP9_HIERARCHY_QP_ENABLE``
> > + Allows host to specify the quantization parameter values for each
> > + temporal layer through HIERARCHICAL_QP_LAYER. This is valid only
> > + if HIERARCHICAL_CODING_LAYER is greater than 1. Setting the control
> > + value to 1 enables setting of the QP values for the layers.
> > +
> > +.. _v4l2-vp9-ref-number-of-pframes:
> > +
> > +``V4L2_CID_MPEG_VIDEO_VP9_REF_NUMBER_FOR_PFRAMES``
> > + (enum)
> > +
> > +enum v4l2_mpeg_vp9_ref_num_for_pframes -
> > + Number of reference pictures for encoding P frames.
> > +
> > +.. raw:: latex
> > +
> > + \footnotesize
> > +
> > +.. tabularcolumns:: |p{9.0cm}|p{8.0cm}|
> > +
> > +.. flat-table::
> > + :header-rows: 0
> > + :stub-columns: 0
> > +
> > + * - ``V4L2_CID_MPEG_VIDEO_VP9_1_REF_PFRAME``
> > + - Indicates one reference frame, last encoded frame will be searched.
> > + * -
> ``V4L2_CID_MPEG_VIDEO_VP9_GOLDEN_FRAME_USE_REF_PERIOD``
> > + - Indicates 2 reference frames, last encoded frame and golden frame
> > + will be searched.
> > +
> > +.. raw:: latex
> > +
> > + \normalsize
> > +
> > +
> > +``V4L2_CID_MPEG_VIDEO_VP9_HIERARCHICAL_CODING_LAYER``
> > + Indicates the number of hierarchial coding layer.
> > + In normal encoding (non-hierarchial coding), it should be zero.
> > + VP9 has upto 3 layer of encoder.
> > +
> > +``V4L2_CID_MPEG_VIDEO_VP9_HIERARCHY_RC_ENABLE``
> > + Indicates enabling of bit rate for hierarchical coding layers VP9 encoder.
> > +
> > +``V4L2_CID_MPEG_VIDEO_VP9_HIER_CODING_L0_BR``
> > + Indicates bit rate for hierarchical coding layer 0 for VP9 encoder.
> > +
> > +``V4L2_CID_MPEG_VIDEO_VP9_HIER_CODING_L1_BR``
> > + Indicates bit rate for hierarchical coding layer 1 for VP9 encoder.
> > +
> > +``V4L2_CID_MPEG_VIDEO_VP9_HIER_CODING_L2_BR``
> > + Indicates bit rate for hierarchical coding layer 2 for VP9 encoder.
> > +
> > +``V4L2_CID_MPEG_VIDEO_VP9_HIER_CODING_L0_QP``
> > + Indicates quantization parameter for hierarchical coding layer 0.
> > + Valid range: [V4L2_CID_MPEG_VIDEO_VP9_MIN_QP,
> > + V4L2_CID_MPEG_VIDEO_VP9_MAX_QP].
> > +
> > +``V4L2_CID_MPEG_VIDEO_VP9_HIER_CODING_L1_QP``
> > + Indicates quantization parameter for hierarchical coding layer 1.
> > + Valid range: [V4L2_CID_MPEG_VIDEO_VP9_MIN_QP,
> > + V4L2_CID_MPEG_VIDEO_VP9_MAX_QP].
> > +
> > +``V4L2_CID_MPEG_VIDEO_VP9_HIER_CODING_L2_QP``
> > + Indicates quantization parameter for hierarchical coding layer 2.
> > + Valid range: [V4L2_CID_MPEG_VIDEO_VP9_MIN_QP,
> > + V4L2_CID_MPEG_VIDEO_VP9_MAX_QP].
> > +
> > +.. _v4l2-vp9-max-partition-depth:
> > +
> > +``V4L2_CID_MPEG_VIDEO_VP9_MAX_PARTITION_DEPTH``
> > + (enum)
> > +
> > +enum v4l2_mpeg_vp9_num_partitions -
> > + Indicate maximum coding unit depth.
> > +
> > +.. raw:: latex
> > +
> > + \footnotesize
> > +
> > +.. tabularcolumns:: |p{9.0cm}|p{8.0cm}|
> > +
> > +.. flat-table::
> > + :header-rows: 0
> > + :stub-columns: 0
> > +
> > + * - ``V4L2_CID_MPEG_VIDEO_VP9_0_PARTITION``
> > + - No coding unit partition depth.
> > + * - ``V4L2_CID_MPEG_VIDEO_VP9_1_PARTITION``
> > + - Allows one coding unit partition depth.
> > +
> > +.. raw:: latex
> > +
> > + \normalsize
> > +
> > +
> > +``V4L2_CID_MPEG_VIDEO_VP9_DISABLE_INTRA_PU_SPLIT``
> > + Zero indicates enable intra NxN PU split.
> > + One indicates disable intra NxN PU split.
> > +
> > +``V4L2_CID_MPEG_VIDEO_VP9_DISABLE_IVF_HEADER``
> > + Indicates IVF header generation. Zero indicates enable IVF format.
> > + One indicates disable IVF format.
> > +
> >
> > High Efficiency Video Coding (HEVC/H.265) Control Reference
> >
> ==========================================================
> =
More information about the linux-arm-kernel
mailing list