[PATCH 2/2] iio: at91-sama5d2: Limit requested watermark value to hwfifo size

[Paul Cercueil]

Instead of returning an error if the watermark value is too high, which
the core will silently ignore anyway, limit the value to the hardware
FIFO size; a lower-than-requested value is still better than using the
default, which is usually 1.

Cc: Eugen Hristev <eugen.hristev at microchip.com>
Cc: Nicolas Ferre <nicolas.ferre at microchip.com>
Cc: Alexandre Belloni <alexandre.belloni at bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches at microchip.com>
Signed-off-by: Paul Cercueil <paul at crapouillou.net>
---
 drivers/iio/adc/at91-sama5d2_adc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
index 854b1f81d807..5cc84f4a17bb 100644
--- a/drivers/iio/adc/at91-sama5d2_adc.c
+++ b/drivers/iio/adc/at91-sama5d2_adc.c
@@ -1752,7 +1752,7 @@ static int at91_adc_set_watermark(struct iio_dev *indio_dev, unsigned int val)
 	int ret;
 
 	if (val > AT91_HWFIFO_MAX_SIZE)
-		return -EINVAL;
+		val = AT91_HWFIFO_MAX_SIZE;
 
 	if (!st->selected_trig->hw_trig) {
 		dev_dbg(&indio_dev->dev, "we need hw trigger for DMA\n");
-- 
2.34.1