[PATCH 1/2] iio: imu: st_lsm6dsx: Limit requested watermark value to hwfifo size

[Paul Cercueil]

Instead of returning an error if the watermark value is too high, which
the core will silently ignore anyway, limit the value to the hardware
FIFO size; a lower-than-requested value is still better than using the
default, which is usually 1.

Cc: Lorenzo Bianconi <lorenzo.bianconi83 at gmail.com>
Signed-off-by: Paul Cercueil <paul at crapouillou.net>
---
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index 727b4b6ac696..5fd46bf1a11b 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -54,6 +54,7 @@
 #include <linux/iio/sysfs.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/minmax.h>
 #include <linux/pm.h>
 #include <linux/property.h>
 #include <linux/regmap.h>
@@ -1607,8 +1608,7 @@ int st_lsm6dsx_set_watermark(struct iio_dev *iio_dev, unsigned int val)
 	struct st_lsm6dsx_hw *hw = sensor->hw;
 	int err;
 
-	if (val < 1 || val > hw->settings->fifo_ops.max_size)
-		return -EINVAL;
+	val = clamp_val(val, 1, hw->settings->fifo_ops.max_size);
 
 	mutex_lock(&hw->conf_lock);
 
-- 
2.34.1