[PATCH V1, 2/6] media: mtk-jpegdec: manage jpegdec multi-hardware

kyrie.wu kyrie.wu at mediatek.com
Sun Feb 20 18:19:27 PST 2022


On Mon, 2022-02-07 at 15:50 +0100, AngeloGioacchino Del Regno wrote:
> Il 03/12/21 06:34, kyrie.wu ha scritto:
> > manage each hardware information, including irq/clk/power.
> > 
> > Signed-off-by: kyrie.wu <kyrie.wu at mediatek.com>
> > ---
> >   drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c   |  77 +++----
> >   drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h   |  56 ++++++
> >   drivers/media/platform/mtk-jpeg/mtk_jpeg_dec_hw.c | 232
> > ++++++++++++++++++++++
> >   3 files changed, 318 insertions(+), 47 deletions(-)
> > 
> > diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
> > b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
> > index 9e89629..f2a5e84 100644
> > --- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
> > +++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
> > @@ -1403,6 +1403,11 @@ static struct clk_bulk_data
> > mtk_jpeg_clocks[] = {
> >   	{ .id = "jpgenc" },
> >   };
> >   
> > +static struct clk_bulk_data mtk_jpeg_dec_clocks[] = {
> > +	{ .id = "jpgdec-smi" },
> > +	{ .id = "jpgdec" },
> > +};
> > +
> 
> This is the exact same thing as "mt8173_jpeg_dec_clocks", hence it's
> redundant and
> should not be added.
> Please reuse that one instead.
Thanks for your reminding, I will reconstruct my patch.
> 
> 
> >   static int mtk_jpeg_clk_init(struct mtk_jpeg_dev *jpeg)
> >   {
> >   	struct device_node *node;
> > @@ -1460,8 +1465,6 @@ static inline void
> > mtk_jpeg_clk_release(struct mtk_jpeg_dev *jpeg)
> >   static int mtk_jpeg_probe(struct platform_device *pdev)
> >   {
> >   	struct mtk_jpeg_dev *jpeg;
> > -	struct resource *res;
> > -	int jpeg_irq;
> >   	int ret;
> >   
> >   	jpeg = devm_kzalloc(&pdev->dev, sizeof(*jpeg), GFP_KERNEL);
> > @@ -1473,40 +1476,7 @@ static int mtk_jpeg_probe(struct
> > platform_device *pdev)
> >   	jpeg->dev = &pdev->dev;
> >   	jpeg->variant = of_device_get_match_data(jpeg->dev);
> >   
> > -	if (!jpeg->variant->is_encoder) {
> > -		INIT_DELAYED_WORK(&jpeg->job_timeout_work,
> > -				mtk_jpeg_job_timeout_work);
> 
> You are removing this worker, so mt8173, mt8183 and the others will
> be broken.
> Please make sure to not break older platforms.
Thanks. I will make sure it.
> 
> > -
> > -		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > -		jpeg->reg_base = devm_ioremap_resource(&pdev->dev,
> > res);
> > -		if (IS_ERR(jpeg->reg_base)) {
> > -			ret = PTR_ERR(jpeg->reg_base);
> > -			return ret;
> > -		}
> > -
> > -		jpeg_irq = platform_get_irq(pdev, 0);
> > -		if (jpeg_irq < 0) {
> > -			dev_err(&pdev->dev, "Failed to get
> > jpeg_irq.\n");
> > -			return jpeg_irq;
> > -		}
> > -
> > -		ret = devm_request_irq(&pdev->dev, jpeg_irq,
> > -				       jpeg->variant->irq_handler,
> > -					   0, pdev->name, jpeg);
> > -		if (ret) {
> > -			dev_err(&pdev->dev, "Failed to request jpeg_irq
> > %d (%d)\n",
> > -				jpeg_irq, ret);
> > -			goto err_req_irq;
> > -		}
> > -
> > -		ret = mtk_jpeg_clk_init(jpeg);
> > -		if (ret) {
> > -			dev_err(&pdev->dev, "Failed to init clk(%d)\n",
> > ret);
> > -			goto err_clk_init;
> > -		}
> > -
> > -		pm_runtime_enable(&pdev->dev);
> > -	} else {
> > +	if (jpeg->variant->is_encoder) {
> >   		init_waitqueue_head(&jpeg->enc_hw_wq);
> >   		jpeg->workqueue =
> > alloc_ordered_workqueue(MTK_JPEG_NAME,
> >   			WQ_MEM_RECLAIM | WQ_FREEZABLE);
> > @@ -1561,13 +1531,11 @@ static int mtk_jpeg_probe(struct
> > platform_device *pdev)
> >   		  jpeg->variant->dev_name, jpeg->vdev->num,
> >   		  VIDEO_MAJOR, jpeg->vdev->minor);
> >   
> > -	if (jpeg->variant->is_encoder) {
> > -		ret = of_platform_populate(pdev->dev.of_node, NULL,
> > NULL,
> > -			&pdev->dev);
> > -		if (ret) {
> > -			v4l2_err(&jpeg->v4l2_dev, "Master of platform
> > populate failed.");
> > -			goto err_vfd_jpeg_register;
> > -		}
> > +	ret = of_platform_populate(pdev->dev.of_node, NULL, NULL,
> > +		&pdev->dev);
> > +	if (ret) {
> > +		v4l2_err(&jpeg->v4l2_dev, "Master of platform populate
> > failed.");
> > +		goto err_vfd_jpeg_register;
> >   	}
> >   
> >   	platform_set_drvdata(pdev, jpeg);
> > @@ -1586,12 +1554,8 @@ static int mtk_jpeg_probe(struct
> > platform_device *pdev)
> >   err_dev_register:
> >   	mtk_jpeg_clk_release(jpeg);
> >   
> > -err_clk_init:
> > -
> >   err_alloc_workqueue:
> >   
> > -err_req_irq:
> > -
> >   	return ret;
> >   }
> >   
> > @@ -1697,6 +1661,20 @@ static const struct mtk_jpeg_variant
> > mtk_jpegenc_drvdata = {
> >   	.cap_q_default_fourcc = V4L2_PIX_FMT_JPEG,
> >   };
> >   
> > +static const struct mtk_jpeg_variant mtk_jpegdec_drvdata = {
> > +	.is_encoder	= false,
> > +	.clks = mtk_jpeg_dec_clocks,
> > +	.num_clks = ARRAY_SIZE(mtk_jpeg_dec_clocks),
> > +	.formats = mtk_jpeg_dec_formats,
> > +	.num_formats = MTK_JPEG_DEC_NUM_FORMATS,
> > +	.qops = &mtk_jpeg_dec_qops,
> > +	.m2m_ops = &mtk_jpeg_dec_m2m_ops,
> > +	.dev_name = "mtk-jpeg-dec",
> > +	.ioctl_ops = &mtk_jpeg_dec_ioctl_ops,
> > +	.out_q_default_fourcc = V4L2_PIX_FMT_JPEG,
> > +	.cap_q_default_fourcc = V4L2_PIX_FMT_YUV420M,
> > +};
> > +
> >   #if defined(CONFIG_OF)
> >   static const struct of_device_id mtk_jpeg_match[] = {
> >   	{
> > @@ -1715,6 +1693,10 @@ static const struct of_device_id
> > mtk_jpeg_match[] = {
> >   		.compatible = "mediatek,mt8195-jpgenc",
> >   		.data = &mtk_jpegenc_drvdata,
> >   	},
> > +	{
> > +		.compatible = "mediatek,mt8195-jpgdec",
> > +		.data = &mtk_jpegdec_drvdata,
> > +	},
> >   	{},
> >   };
> >   MODULE_DEVICE_TABLE(of, mtk_jpeg_match);
> > @@ -1732,6 +1714,7 @@ static struct platform_driver mtk_jpeg_driver
> > = {
> >   
> >   static struct platform_driver * const mtk_jpeg_source_drivers[] =
> > {
> >   	&mtk_jpegenc_hw_driver,
> > +	&mtk_jpegdec_hw_driver,
> >   	&mtk_jpeg_driver,
> >   };
> >   static int __init mtk_jpeg_init(void)
> > diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
> > b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
> > index f276221..20243d4 100644
> > --- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
> > +++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
> > @@ -102,6 +102,13 @@ enum mtk_jpegenc_hw_id {
> >   	MTK_JPEGENC_HW_MAX,
> >   };
> >   
> > +enum mtk_jpegdec_hw_id {
> > +	MTK_JPEGDEC_HW0,
> > +	MTK_JPEGDEC_HW1,
> > +	MTK_JPEGDEC_HW2,
> > +	MTK_JPEGDEC_HW_MAX,
> > +};
> > +
> >   /**
> >    * struct mtk_jpegenc_clk_info - Structure used to store clock
> > name
> >    */
> > @@ -151,6 +158,51 @@ struct mtk_jpegenc_comp_dev {
> >   };
> >   
> >   /**
> > + * struct mtk_jpegdec_clk_info - Structure used to store clock
> > name
> > + */
> > +struct mtk_jpegdec_clk_info {
> > +	const char	*clk_name;
> > +	struct clk
> > +	*jpegdec_clk;
> > +};
> > +
> > +/**
> > + * struct mtk_jpegdec_clk - Structure used to
> > + * store vcodec clock information
> > + */
> > +struct mtk_jpegdec_clk {
> > +	struct mtk_jpegdec_clk_info	*clk_info;
> > +	int	clk_num;
> > +};
> > +
> > +/**
> > + * struct mtk_jpegdec_pm - Power management data structure
> > + */
> > +struct mtk_jpegdec_pm {
> > +	struct mtk_jpegdec_clk	dec_clk;
> > +	struct device	*dev;
> > +	struct mtk_jpegdec_comp_dev	*mtkdev;
> > +};
> > +
> > +/**
> > + * struct mtk_jpegdec_comp_dev - JPEG COREX abstraction
> > + * @dev:		        JPEG device
> > + * @plat_dev:		    platform device data
> > + * @reg_base:		    JPEG registers mapping
> > + * @master_dev:		    mtk_jpeg_dev device
> > + * @pm:	                mtk_jpegdec_pm
> > + * @jpegdec_irq:	    jpeg decode irq num
> > + */
> > +struct mtk_jpegdec_comp_dev {
> > +	struct device *dev;
> > +	struct platform_device *plat_dev;
> > +	void __iomem *reg_base;
> > +	struct mtk_jpeg_dev *master_dev;
> > +	struct mtk_jpegdec_pm pm;
> > +	int jpegdec_irq;
> > +};
> > +
> > +/**
> >    * struct mtk_jpeg_dev - JPEG IP abstraction
> >    * @lock:		the mutex protecting this structure
> >    * @hw_lock:		spinlock protecting the hw device
> > resource
> > @@ -182,6 +234,9 @@ struct mtk_jpeg_dev {
> >   	void __iomem *reg_encbase[MTK_JPEGENC_HW_MAX];
> >   	struct mtk_jpegenc_comp_dev *enc_hw_dev[MTK_JPEGENC_HW_MAX];
> >   	wait_queue_head_t enc_hw_wq;
> > +
> > +	void __iomem *reg_decbase[MTK_JPEGDEC_HW_MAX];
> > +	struct mtk_jpegdec_comp_dev *dec_hw_dev[MTK_JPEGDEC_HW_MAX];
> >   };
> >   
> >   /**
> > @@ -248,5 +303,6 @@ struct mtk_jpeg_ctx {
> >   };
> >   
> >   extern struct platform_driver mtk_jpegenc_hw_driver;
> > +extern struct platform_driver mtk_jpegdec_hw_driver;
> >   
> >   #endif /* _MTK_JPEG_CORE_H */
> > diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_dec_hw.c
> > b/drivers/media/platform/mtk-jpeg/mtk_jpeg_dec_hw.c
> > index 1e38522..86f12bd 100644
> > --- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_dec_hw.c
> > +++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_dec_hw.c
> > @@ -5,9 +5,24 @@
> >    *         Rick Chang <rick.chang at mediatek.com>
> >    */
> >   
> > +#include <linux/clk.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/irq.h>
> >   #include <linux/io.h>
> >   #include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/of_device.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/slab.h>
> > +#include <media/media-device.h>
> >   #include <media/videobuf2-core.h>
> > +#include <media/videobuf2-v4l2.h>
> > +#include <media/v4l2-mem2mem.h>
> > +#include <media/v4l2-dev.h>
> > +#include <media/v4l2-device.h>
> > +#include <media/v4l2-fh.h>
> > +#include <media/v4l2-event.h>
> >   
> >   #include "mtk_jpeg_core.h"
> >   #include "mtk_jpeg_dec_hw.h"
> > @@ -24,6 +39,25 @@ enum mtk_jpeg_color {
> >   	MTK_JPEG_COLOR_400		= 0x00110000
> >   };
> >   
> > +#if defined(CONFIG_OF)
> > +static const struct of_device_id mtk_jpegdec_hw_ids[] = {
> > +	{
> > +		.compatible = "mediatek,mt8195-jpgdec0",
> > +		.data = (void *)MTK_JPEGDEC_HW0,
> > +	},
> > +	{
> > +		.compatible = "mediatek,mt8195-jpgdec1",
> > +		.data = (void *)MTK_JPEGDEC_HW1,
> > +	},
> > +	{
> > +		.compatible = "mediatek,mt8195-jpgdec2",
> > +		.data = (void *)MTK_JPEGDEC_HW2,
> > +	},
> > +	{},
> > +};
> 
> Please look at the comment/proposal that I've made on the jpeg
> encoder
> series: the same applies here to the decoder part.
> So, in this case, it'd be just "mediatek,mt8195-jpgdec-hw".
Thanks. I will repair this code.
> 
> > +MODULE_DEVICE_TABLE(of, mtk_jpegdec_hw_ids);
> > +#endif
> > +
> >   static inline int mtk_jpeg_verify_align(u32 val, int align, u32
> > reg)
> >   {
> >   	if (val & (align - 1)) {
> > @@ -408,3 +442,201 @@ void mtk_jpeg_dec_set_config(void __iomem
> > *base,
> >   				   config->dma_last_mcu);
> >   	mtk_jpeg_dec_set_pause_mcu_idx(base, config->total_mcu);
> >   }
> > +
> > +int mtk_jpegdec_init_pm(struct mtk_jpegdec_comp_dev *mtkdev)
> > +{
> > +	struct mtk_jpegdec_clk_info *clk_info;
> > +	struct mtk_jpegdec_clk *jpegdec_clk;
> > +	struct platform_device *pdev;
> > +	struct mtk_jpegdec_pm *pm;
> > +	int i, ret;
> > +
> > +	pdev = mtkdev->plat_dev;
> > +	pm = &mtkdev->pm;
> > +	pm->dev = &pdev->dev;
> > +	pm->mtkdev = mtkdev;
> > +	jpegdec_clk = &pm->dec_clk;
> > +	jpegdec_clk->clk_num =
> > +		of_property_count_strings(pdev->dev.of_node, "clock-
> > names");
> > +	if (!jpegdec_clk->clk_num) {
> > +		dev_err(&pdev->dev, "Failed to get jpegenc clock
> > count\n");
> > +		return -EINVAL;
> > +	}
> > +
> > +	jpegdec_clk->clk_info = devm_kcalloc(&pdev->dev,
> > +		jpegdec_clk->clk_num,
> > +		sizeof(*clk_info),
> > +		GFP_KERNEL);
> > +	if (!jpegdec_clk->clk_info)
> > +		return -ENOMEM;
> > +
> > +	for (i = 0; i < jpegdec_clk->clk_num; i++) {
> > +		clk_info = &jpegdec_clk->clk_info[i];
> > +		ret = of_property_read_string_index(pdev->dev.of_node,
> > +			"clock-names", i,
> > +			&clk_info->clk_name);
> > +		if (ret) {
> > +			dev_err(&pdev->dev, "Failed to get jpegenc
> > clock name\n");
> > +			return ret;
> > +		}
> > +
> > +		clk_info->jpegdec_clk = devm_clk_get(&pdev->dev,
> > +			clk_info->clk_name);
> > +		if (IS_ERR(clk_info->jpegdec_clk)) {
> > +			dev_err(&pdev->dev, "devm_clk_get (%d)%s fail",
> > +				i, clk_info->clk_name);
> > +			return PTR_ERR(clk_info->jpegdec_clk);
> > +		}
> > +	}
> > +
> > +	pm_runtime_enable(&pdev->dev);
> 
> To shorten the code, you should call pm_runtime_enable() at the end
> of the
> probe function instead... check the comments below.
Dear AngeloGioacchino,
Thanks. Your suggestion would be took in the version.
> 
> > +
> > +	return ret;
> > +}
> > +
> > +static irqreturn_t mtk_jpegdec_hw_irq_handler(int irq, void *priv)
> > +{
> > +	struct vb2_v4l2_buffer *src_buf, *dst_buf;
> > +	struct mtk_jpeg_src_buf *jpeg_src_buf;
> > +	enum vb2_buffer_state buf_state;
> > +	struct mtk_jpeg_ctx *ctx;
> > +	u32 dec_irq_ret;
> > +	u32 irq_status;
> > +	int i;
> > +
> > +	struct mtk_jpegdec_comp_dev *jpeg = priv;
> > +	struct mtk_jpeg_dev *master_jpeg = jpeg->master_dev;
> > +
> > +	irq_status = mtk_jpeg_dec_get_int_status(jpeg->reg_base);
> > +	dec_irq_ret = mtk_jpeg_dec_enum_result(irq_status);
> > +	if (dec_irq_ret >= MTK_JPEG_DEC_RESULT_UNDERFLOW)
> > +		mtk_jpeg_dec_reset(jpeg->reg_base);
> > +	if (dec_irq_ret != MTK_JPEG_DEC_RESULT_EOF_DONE) {
> > +		dev_err(jpeg->dev, "decode failed\n");
> > +		goto dec_end;
> > +	}
> > +
> > +	ctx = v4l2_m2m_get_curr_priv(master_jpeg->m2m_dev);
> > +	if (!ctx) {
> > +		dev_err(jpeg->dev, "Context is NULL\n");
> > +		return IRQ_HANDLED;
> > +		}
> > +
> > +	src_buf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
> > +	dst_buf = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
> > +	jpeg_src_buf =
> > +		container_of(src_buf, struct mtk_jpeg_src_buf, b);
> > +
> > +	for (i = 0; i < dst_buf->vb2_buf.num_planes; i++)
> > +		vb2_set_plane_payload(&dst_buf->vb2_buf, i,
> > +		jpeg_src_buf->dec_param.comp_size[i]);
> > +
> > +	buf_state = VB2_BUF_STATE_DONE;
> > +
> > +dec_end:
> > +	v4l2_m2m_buf_done(src_buf, buf_state);
> > +	v4l2_m2m_buf_done(dst_buf, buf_state);
> > +	v4l2_m2m_job_finish(master_jpeg->m2m_dev, ctx->fh.m2m_ctx);
> > +	pm_runtime_put(ctx->jpeg->dev);
> > +
> > +	return IRQ_HANDLED;
> > +}
> > +
> > +static int mtk_jpegdec_hw_init_irq(struct mtk_jpegdec_comp_dev
> > *dev)
> > +{
> > +	struct platform_device *pdev = dev->plat_dev;
> > +	int ret;
> > +
> > +	dev->jpegdec_irq = platform_get_irq(pdev, 0);
> > +	if (dev->jpegdec_irq < 0) {
> > +		dev_err(&pdev->dev, "Failed to get irq resource");
> > +		return dev->jpegdec_irq;
> > +	}
> > +
> > +	ret = devm_request_irq(&pdev->dev, dev->jpegdec_irq,
> > +		mtk_jpegdec_hw_irq_handler, 0, pdev->name, dev);
> > +	if (ret) {
> > +		dev_err(&pdev->dev, "Failed to devm_request_irq %d
> > (%d)",
> > +			dev->jpegdec_irq, ret);
> > +		return -ENOENT;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +void mtk_jpegdec_release_pm(struct mtk_jpegdec_comp_dev *mtkdev)
> > +{
> > +	struct platform_device *pdev = mtkdev->plat_dev;
> > +
> 
> You're using this function only in this file... and then, this is
> just one line.
> This helper is not needed: please simply call pm_runtime_disable
> where needed.
I will take your suggestion to shorten code.
Thanks.
> 
> > +	pm_runtime_disable(&pdev->dev);
> > +}
> > +
> > +static int mtk_jpegdec_hw_probe(struct platform_device *pdev)
> > +{
> > +	struct mtk_jpeg_dev *master_dev;
> > +	struct mtk_jpegdec_comp_dev *dev;
> > +	const struct of_device_id *of_id;
> > +	int ret, comp_idx;
> > +
> > +	struct device *decs = &pdev->dev;
> > +
> > +	if (!decs->parent)
> > +		return -EPROBE_DEFER;
> > +
> > +	master_dev = dev_get_drvdata(decs->parent);
> > +	if (!master_dev)
> > +		return -EPROBE_DEFER;
> > +
> > +	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
> > +	if (!dev)
> > +		return -ENOMEM;
> > +
> > +	dev->plat_dev = pdev;
> > +	ret = mtk_jpegdec_init_pm(dev);
> > +	if (ret) {
> > +		dev_err(&pdev->dev, "Failed to get jpeg enc clock
> > source");
> 
> 	if (ret)
> 		return dev_err_probe(&pdev->dev, ret, ".....blurb");
> 
> That's shorter, and it is recommended to use dev_err_probe() even if
> the
> function cannot return -EPROBE_DEFER.
Thanks. I will use dev_err_probe() to replace it.
> 
> > +		return ret;
> > +	}
> > +
> > +	dev->reg_base =
> > +		devm_platform_ioremap_resource(pdev, 0);
> > +	if (IS_ERR(dev->reg_base)) {
> 
> By moving the pm_runtime_enable() call to the end of the probe
> function, you
> won't need this goto, hence you'll be able to simply
Thanks. I will simply this code.
> 
> 		return PTR_ERR(dev->reg_base);
> 
> > +		ret = PTR_ERR(dev->reg_base);
> > +		goto err;
> > +	}
> > +
> > +	ret = mtk_jpegdec_hw_init_irq(dev);
> > +	if (ret) {
> > +		dev_err(&pdev->dev, "Failed to register JPEGDEC irq
> > handler.\n");
> 
> ...and it's the same here, with dev_err_probe().
Thanks.
> 
> > +		goto err;
> > +	}
> > +
> > +	of_id = of_match_device(mtk_jpegdec_hw_ids, decs);
> > +	if (!of_id) {
> > +		dev_err(&pdev->dev, "Can't get vdec comp device
> > id.\n");
> 
> .... and here too, but if you follow what I said in the encoder
> review, this call
> may not even be necessary, as you'd be simply checking if
> "mediatek,hw-leader" is
> true (meaning that it's device 0), otherwise it's device number x
> (where x > 0).
Thanks.
The code logic will be simplified.
> 
> > +		ret = -EINVAL;
> > +		goto err;
> > +	}
> > +
> > +	comp_idx = (enum mtk_jpegdec_hw_id)of_id->data;
> > +	if (comp_idx < MTK_JPEGDEC_HW_MAX) {
> > +		master_dev->dec_hw_dev[comp_idx] = dev;
> > +		master_dev->reg_decbase[comp_idx] = dev->reg_base;
> > +		dev->master_dev = master_dev;
> > +	}
> > +
> 
> 	pm_runtime_enable(&pdev->dev);
> 
> > +	platform_set_drvdata(pdev, dev);
> > +	return 0;
> > +
> > +err:
> > +	mtk_jpegdec_release_pm(dev);
> > +	return ret;
> > +}
> > +
> > +struct platform_driver mtk_jpegdec_hw_driver = {
> > +	.probe	= mtk_jpegdec_hw_probe,
> > +	.driver	= {
> > +		.name	= "mtk-jpegdec-hw",
> > +		.of_match_table = mtk_jpegdec_hw_ids,
> > +	},
> > +};
> 
> Regards,
> Angelo


More information about the linux-arm-kernel mailing list