[PATCH V1, 2/6] media: mtk-jpegdec: manage jpegdec multi-hardware
AngeloGioacchino Del Regno
angelogioacchino.delregno at collabora.com
Mon Feb 7 06:50:42 PST 2022
Il 03/12/21 06:34, kyrie.wu ha scritto:
> manage each hardware information, including irq/clk/power.
>
> Signed-off-by: kyrie.wu <kyrie.wu at mediatek.com>
> ---
> drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c | 77 +++----
> drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h | 56 ++++++
> drivers/media/platform/mtk-jpeg/mtk_jpeg_dec_hw.c | 232 ++++++++++++++++++++++
> 3 files changed, 318 insertions(+), 47 deletions(-)
>
> diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
> index 9e89629..f2a5e84 100644
> --- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
> +++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
> @@ -1403,6 +1403,11 @@ static struct clk_bulk_data mtk_jpeg_clocks[] = {
> { .id = "jpgenc" },
> };
>
> +static struct clk_bulk_data mtk_jpeg_dec_clocks[] = {
> + { .id = "jpgdec-smi" },
> + { .id = "jpgdec" },
> +};
> +
This is the exact same thing as "mt8173_jpeg_dec_clocks", hence it's redundant and
should not be added.
Please reuse that one instead.
> static int mtk_jpeg_clk_init(struct mtk_jpeg_dev *jpeg)
> {
> struct device_node *node;
> @@ -1460,8 +1465,6 @@ static inline void mtk_jpeg_clk_release(struct mtk_jpeg_dev *jpeg)
> static int mtk_jpeg_probe(struct platform_device *pdev)
> {
> struct mtk_jpeg_dev *jpeg;
> - struct resource *res;
> - int jpeg_irq;
> int ret;
>
> jpeg = devm_kzalloc(&pdev->dev, sizeof(*jpeg), GFP_KERNEL);
> @@ -1473,40 +1476,7 @@ static int mtk_jpeg_probe(struct platform_device *pdev)
> jpeg->dev = &pdev->dev;
> jpeg->variant = of_device_get_match_data(jpeg->dev);
>
> - if (!jpeg->variant->is_encoder) {
> - INIT_DELAYED_WORK(&jpeg->job_timeout_work,
> - mtk_jpeg_job_timeout_work);
You are removing this worker, so mt8173, mt8183 and the others will be broken.
Please make sure to not break older platforms.
> -
> - res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> - jpeg->reg_base = devm_ioremap_resource(&pdev->dev, res);
> - if (IS_ERR(jpeg->reg_base)) {
> - ret = PTR_ERR(jpeg->reg_base);
> - return ret;
> - }
> -
> - jpeg_irq = platform_get_irq(pdev, 0);
> - if (jpeg_irq < 0) {
> - dev_err(&pdev->dev, "Failed to get jpeg_irq.\n");
> - return jpeg_irq;
> - }
> -
> - ret = devm_request_irq(&pdev->dev, jpeg_irq,
> - jpeg->variant->irq_handler,
> - 0, pdev->name, jpeg);
> - if (ret) {
> - dev_err(&pdev->dev, "Failed to request jpeg_irq %d (%d)\n",
> - jpeg_irq, ret);
> - goto err_req_irq;
> - }
> -
> - ret = mtk_jpeg_clk_init(jpeg);
> - if (ret) {
> - dev_err(&pdev->dev, "Failed to init clk(%d)\n", ret);
> - goto err_clk_init;
> - }
> -
> - pm_runtime_enable(&pdev->dev);
> - } else {
> + if (jpeg->variant->is_encoder) {
> init_waitqueue_head(&jpeg->enc_hw_wq);
> jpeg->workqueue = alloc_ordered_workqueue(MTK_JPEG_NAME,
> WQ_MEM_RECLAIM | WQ_FREEZABLE);
> @@ -1561,13 +1531,11 @@ static int mtk_jpeg_probe(struct platform_device *pdev)
> jpeg->variant->dev_name, jpeg->vdev->num,
> VIDEO_MAJOR, jpeg->vdev->minor);
>
> - if (jpeg->variant->is_encoder) {
> - ret = of_platform_populate(pdev->dev.of_node, NULL, NULL,
> - &pdev->dev);
> - if (ret) {
> - v4l2_err(&jpeg->v4l2_dev, "Master of platform populate failed.");
> - goto err_vfd_jpeg_register;
> - }
> + ret = of_platform_populate(pdev->dev.of_node, NULL, NULL,
> + &pdev->dev);
> + if (ret) {
> + v4l2_err(&jpeg->v4l2_dev, "Master of platform populate failed.");
> + goto err_vfd_jpeg_register;
> }
>
> platform_set_drvdata(pdev, jpeg);
> @@ -1586,12 +1554,8 @@ static int mtk_jpeg_probe(struct platform_device *pdev)
> err_dev_register:
> mtk_jpeg_clk_release(jpeg);
>
> -err_clk_init:
> -
> err_alloc_workqueue:
>
> -err_req_irq:
> -
> return ret;
> }
>
> @@ -1697,6 +1661,20 @@ static const struct mtk_jpeg_variant mtk_jpegenc_drvdata = {
> .cap_q_default_fourcc = V4L2_PIX_FMT_JPEG,
> };
>
> +static const struct mtk_jpeg_variant mtk_jpegdec_drvdata = {
> + .is_encoder = false,
> + .clks = mtk_jpeg_dec_clocks,
> + .num_clks = ARRAY_SIZE(mtk_jpeg_dec_clocks),
> + .formats = mtk_jpeg_dec_formats,
> + .num_formats = MTK_JPEG_DEC_NUM_FORMATS,
> + .qops = &mtk_jpeg_dec_qops,
> + .m2m_ops = &mtk_jpeg_dec_m2m_ops,
> + .dev_name = "mtk-jpeg-dec",
> + .ioctl_ops = &mtk_jpeg_dec_ioctl_ops,
> + .out_q_default_fourcc = V4L2_PIX_FMT_JPEG,
> + .cap_q_default_fourcc = V4L2_PIX_FMT_YUV420M,
> +};
> +
> #if defined(CONFIG_OF)
> static const struct of_device_id mtk_jpeg_match[] = {
> {
> @@ -1715,6 +1693,10 @@ static const struct of_device_id mtk_jpeg_match[] = {
> .compatible = "mediatek,mt8195-jpgenc",
> .data = &mtk_jpegenc_drvdata,
> },
> + {
> + .compatible = "mediatek,mt8195-jpgdec",
> + .data = &mtk_jpegdec_drvdata,
> + },
> {},
> };
> MODULE_DEVICE_TABLE(of, mtk_jpeg_match);
> @@ -1732,6 +1714,7 @@ static struct platform_driver mtk_jpeg_driver = {
>
> static struct platform_driver * const mtk_jpeg_source_drivers[] = {
> &mtk_jpegenc_hw_driver,
> + &mtk_jpegdec_hw_driver,
> &mtk_jpeg_driver,
> };
> static int __init mtk_jpeg_init(void)
> diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
> index f276221..20243d4 100644
> --- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
> +++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.h
> @@ -102,6 +102,13 @@ enum mtk_jpegenc_hw_id {
> MTK_JPEGENC_HW_MAX,
> };
>
> +enum mtk_jpegdec_hw_id {
> + MTK_JPEGDEC_HW0,
> + MTK_JPEGDEC_HW1,
> + MTK_JPEGDEC_HW2,
> + MTK_JPEGDEC_HW_MAX,
> +};
> +
> /**
> * struct mtk_jpegenc_clk_info - Structure used to store clock name
> */
> @@ -151,6 +158,51 @@ struct mtk_jpegenc_comp_dev {
> };
>
> /**
> + * struct mtk_jpegdec_clk_info - Structure used to store clock name
> + */
> +struct mtk_jpegdec_clk_info {
> + const char *clk_name;
> + struct clk
> + *jpegdec_clk;
> +};
> +
> +/**
> + * struct mtk_jpegdec_clk - Structure used to
> + * store vcodec clock information
> + */
> +struct mtk_jpegdec_clk {
> + struct mtk_jpegdec_clk_info *clk_info;
> + int clk_num;
> +};
> +
> +/**
> + * struct mtk_jpegdec_pm - Power management data structure
> + */
> +struct mtk_jpegdec_pm {
> + struct mtk_jpegdec_clk dec_clk;
> + struct device *dev;
> + struct mtk_jpegdec_comp_dev *mtkdev;
> +};
> +
> +/**
> + * struct mtk_jpegdec_comp_dev - JPEG COREX abstraction
> + * @dev: JPEG device
> + * @plat_dev: platform device data
> + * @reg_base: JPEG registers mapping
> + * @master_dev: mtk_jpeg_dev device
> + * @pm: mtk_jpegdec_pm
> + * @jpegdec_irq: jpeg decode irq num
> + */
> +struct mtk_jpegdec_comp_dev {
> + struct device *dev;
> + struct platform_device *plat_dev;
> + void __iomem *reg_base;
> + struct mtk_jpeg_dev *master_dev;
> + struct mtk_jpegdec_pm pm;
> + int jpegdec_irq;
> +};
> +
> +/**
> * struct mtk_jpeg_dev - JPEG IP abstraction
> * @lock: the mutex protecting this structure
> * @hw_lock: spinlock protecting the hw device resource
> @@ -182,6 +234,9 @@ struct mtk_jpeg_dev {
> void __iomem *reg_encbase[MTK_JPEGENC_HW_MAX];
> struct mtk_jpegenc_comp_dev *enc_hw_dev[MTK_JPEGENC_HW_MAX];
> wait_queue_head_t enc_hw_wq;
> +
> + void __iomem *reg_decbase[MTK_JPEGDEC_HW_MAX];
> + struct mtk_jpegdec_comp_dev *dec_hw_dev[MTK_JPEGDEC_HW_MAX];
> };
>
> /**
> @@ -248,5 +303,6 @@ struct mtk_jpeg_ctx {
> };
>
> extern struct platform_driver mtk_jpegenc_hw_driver;
> +extern struct platform_driver mtk_jpegdec_hw_driver;
>
> #endif /* _MTK_JPEG_CORE_H */
> diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_dec_hw.c b/drivers/media/platform/mtk-jpeg/mtk_jpeg_dec_hw.c
> index 1e38522..86f12bd 100644
> --- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_dec_hw.c
> +++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_dec_hw.c
> @@ -5,9 +5,24 @@
> * Rick Chang <rick.chang at mediatek.com>
> */
>
> +#include <linux/clk.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> #include <linux/io.h>
> #include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/slab.h>
> +#include <media/media-device.h>
> #include <media/videobuf2-core.h>
> +#include <media/videobuf2-v4l2.h>
> +#include <media/v4l2-mem2mem.h>
> +#include <media/v4l2-dev.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-fh.h>
> +#include <media/v4l2-event.h>
>
> #include "mtk_jpeg_core.h"
> #include "mtk_jpeg_dec_hw.h"
> @@ -24,6 +39,25 @@ enum mtk_jpeg_color {
> MTK_JPEG_COLOR_400 = 0x00110000
> };
>
> +#if defined(CONFIG_OF)
> +static const struct of_device_id mtk_jpegdec_hw_ids[] = {
> + {
> + .compatible = "mediatek,mt8195-jpgdec0",
> + .data = (void *)MTK_JPEGDEC_HW0,
> + },
> + {
> + .compatible = "mediatek,mt8195-jpgdec1",
> + .data = (void *)MTK_JPEGDEC_HW1,
> + },
> + {
> + .compatible = "mediatek,mt8195-jpgdec2",
> + .data = (void *)MTK_JPEGDEC_HW2,
> + },
> + {},
> +};
Please look at the comment/proposal that I've made on the jpeg encoder
series: the same applies here to the decoder part.
So, in this case, it'd be just "mediatek,mt8195-jpgdec-hw".
> +MODULE_DEVICE_TABLE(of, mtk_jpegdec_hw_ids);
> +#endif
> +
> static inline int mtk_jpeg_verify_align(u32 val, int align, u32 reg)
> {
> if (val & (align - 1)) {
> @@ -408,3 +442,201 @@ void mtk_jpeg_dec_set_config(void __iomem *base,
> config->dma_last_mcu);
> mtk_jpeg_dec_set_pause_mcu_idx(base, config->total_mcu);
> }
> +
> +int mtk_jpegdec_init_pm(struct mtk_jpegdec_comp_dev *mtkdev)
> +{
> + struct mtk_jpegdec_clk_info *clk_info;
> + struct mtk_jpegdec_clk *jpegdec_clk;
> + struct platform_device *pdev;
> + struct mtk_jpegdec_pm *pm;
> + int i, ret;
> +
> + pdev = mtkdev->plat_dev;
> + pm = &mtkdev->pm;
> + pm->dev = &pdev->dev;
> + pm->mtkdev = mtkdev;
> + jpegdec_clk = &pm->dec_clk;
> + jpegdec_clk->clk_num =
> + of_property_count_strings(pdev->dev.of_node, "clock-names");
> + if (!jpegdec_clk->clk_num) {
> + dev_err(&pdev->dev, "Failed to get jpegenc clock count\n");
> + return -EINVAL;
> + }
> +
> + jpegdec_clk->clk_info = devm_kcalloc(&pdev->dev,
> + jpegdec_clk->clk_num,
> + sizeof(*clk_info),
> + GFP_KERNEL);
> + if (!jpegdec_clk->clk_info)
> + return -ENOMEM;
> +
> + for (i = 0; i < jpegdec_clk->clk_num; i++) {
> + clk_info = &jpegdec_clk->clk_info[i];
> + ret = of_property_read_string_index(pdev->dev.of_node,
> + "clock-names", i,
> + &clk_info->clk_name);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to get jpegenc clock name\n");
> + return ret;
> + }
> +
> + clk_info->jpegdec_clk = devm_clk_get(&pdev->dev,
> + clk_info->clk_name);
> + if (IS_ERR(clk_info->jpegdec_clk)) {
> + dev_err(&pdev->dev, "devm_clk_get (%d)%s fail",
> + i, clk_info->clk_name);
> + return PTR_ERR(clk_info->jpegdec_clk);
> + }
> + }
> +
> + pm_runtime_enable(&pdev->dev);
To shorten the code, you should call pm_runtime_enable() at the end of the
probe function instead... check the comments below.
> +
> + return ret;
> +}
> +
> +static irqreturn_t mtk_jpegdec_hw_irq_handler(int irq, void *priv)
> +{
> + struct vb2_v4l2_buffer *src_buf, *dst_buf;
> + struct mtk_jpeg_src_buf *jpeg_src_buf;
> + enum vb2_buffer_state buf_state;
> + struct mtk_jpeg_ctx *ctx;
> + u32 dec_irq_ret;
> + u32 irq_status;
> + int i;
> +
> + struct mtk_jpegdec_comp_dev *jpeg = priv;
> + struct mtk_jpeg_dev *master_jpeg = jpeg->master_dev;
> +
> + irq_status = mtk_jpeg_dec_get_int_status(jpeg->reg_base);
> + dec_irq_ret = mtk_jpeg_dec_enum_result(irq_status);
> + if (dec_irq_ret >= MTK_JPEG_DEC_RESULT_UNDERFLOW)
> + mtk_jpeg_dec_reset(jpeg->reg_base);
> + if (dec_irq_ret != MTK_JPEG_DEC_RESULT_EOF_DONE) {
> + dev_err(jpeg->dev, "decode failed\n");
> + goto dec_end;
> + }
> +
> + ctx = v4l2_m2m_get_curr_priv(master_jpeg->m2m_dev);
> + if (!ctx) {
> + dev_err(jpeg->dev, "Context is NULL\n");
> + return IRQ_HANDLED;
> + }
> +
> + src_buf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
> + dst_buf = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
> + jpeg_src_buf =
> + container_of(src_buf, struct mtk_jpeg_src_buf, b);
> +
> + for (i = 0; i < dst_buf->vb2_buf.num_planes; i++)
> + vb2_set_plane_payload(&dst_buf->vb2_buf, i,
> + jpeg_src_buf->dec_param.comp_size[i]);
> +
> + buf_state = VB2_BUF_STATE_DONE;
> +
> +dec_end:
> + v4l2_m2m_buf_done(src_buf, buf_state);
> + v4l2_m2m_buf_done(dst_buf, buf_state);
> + v4l2_m2m_job_finish(master_jpeg->m2m_dev, ctx->fh.m2m_ctx);
> + pm_runtime_put(ctx->jpeg->dev);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int mtk_jpegdec_hw_init_irq(struct mtk_jpegdec_comp_dev *dev)
> +{
> + struct platform_device *pdev = dev->plat_dev;
> + int ret;
> +
> + dev->jpegdec_irq = platform_get_irq(pdev, 0);
> + if (dev->jpegdec_irq < 0) {
> + dev_err(&pdev->dev, "Failed to get irq resource");
> + return dev->jpegdec_irq;
> + }
> +
> + ret = devm_request_irq(&pdev->dev, dev->jpegdec_irq,
> + mtk_jpegdec_hw_irq_handler, 0, pdev->name, dev);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to devm_request_irq %d (%d)",
> + dev->jpegdec_irq, ret);
> + return -ENOENT;
> + }
> +
> + return 0;
> +}
> +
> +void mtk_jpegdec_release_pm(struct mtk_jpegdec_comp_dev *mtkdev)
> +{
> + struct platform_device *pdev = mtkdev->plat_dev;
> +
You're using this function only in this file... and then, this is just one line.
This helper is not needed: please simply call pm_runtime_disable where needed.
> + pm_runtime_disable(&pdev->dev);
> +}
> +
> +static int mtk_jpegdec_hw_probe(struct platform_device *pdev)
> +{
> + struct mtk_jpeg_dev *master_dev;
> + struct mtk_jpegdec_comp_dev *dev;
> + const struct of_device_id *of_id;
> + int ret, comp_idx;
> +
> + struct device *decs = &pdev->dev;
> +
> + if (!decs->parent)
> + return -EPROBE_DEFER;
> +
> + master_dev = dev_get_drvdata(decs->parent);
> + if (!master_dev)
> + return -EPROBE_DEFER;
> +
> + dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
> + if (!dev)
> + return -ENOMEM;
> +
> + dev->plat_dev = pdev;
> + ret = mtk_jpegdec_init_pm(dev);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to get jpeg enc clock source");
if (ret)
return dev_err_probe(&pdev->dev, ret, ".....blurb");
That's shorter, and it is recommended to use dev_err_probe() even if the
function cannot return -EPROBE_DEFER.
> + return ret;
> + }
> +
> + dev->reg_base =
> + devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(dev->reg_base)) {
By moving the pm_runtime_enable() call to the end of the probe function, you
won't need this goto, hence you'll be able to simply
return PTR_ERR(dev->reg_base);
> + ret = PTR_ERR(dev->reg_base);
> + goto err;
> + }
> +
> + ret = mtk_jpegdec_hw_init_irq(dev);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to register JPEGDEC irq handler.\n");
...and it's the same here, with dev_err_probe().
> + goto err;
> + }
> +
> + of_id = of_match_device(mtk_jpegdec_hw_ids, decs);
> + if (!of_id) {
> + dev_err(&pdev->dev, "Can't get vdec comp device id.\n");
.... and here too, but if you follow what I said in the encoder review, this call
may not even be necessary, as you'd be simply checking if "mediatek,hw-leader" is
true (meaning that it's device 0), otherwise it's device number x (where x > 0).
> + ret = -EINVAL;
> + goto err;
> + }
> +
> + comp_idx = (enum mtk_jpegdec_hw_id)of_id->data;
> + if (comp_idx < MTK_JPEGDEC_HW_MAX) {
> + master_dev->dec_hw_dev[comp_idx] = dev;
> + master_dev->reg_decbase[comp_idx] = dev->reg_base;
> + dev->master_dev = master_dev;
> + }
> +
pm_runtime_enable(&pdev->dev);
> + platform_set_drvdata(pdev, dev);
> + return 0;
> +
> +err:
> + mtk_jpegdec_release_pm(dev);
> + return ret;
> +}
> +
> +struct platform_driver mtk_jpegdec_hw_driver = {
> + .probe = mtk_jpegdec_hw_probe,
> + .driver = {
> + .name = "mtk-jpegdec-hw",
> + .of_match_table = mtk_jpegdec_hw_ids,
> + },
> +};
Regards,
Angelo
More information about the linux-arm-kernel
mailing list