[PATCH] arm64: dts: imx8ulp: Set #thermal-sensor-cells to 1 as required

[Sudeep Holla]

The SCMI binding clearly states the value of #thermal-sensor-cells must
be 1. However arch/arm64/boot/dts/freescale/imx8ulp.dtsi sets it 0 which
results in the following warning with dtbs_check:

  |  arch/arm64/boot/dts/freescale/imx8ulp-evk.dt.yaml: scmi:
  | 		protocol at 15:#thermal-sensor-cells:0:0: 1 was expected
  |	From schema: Documentation/devicetree/bindings/firmware/arm,scmi.yaml

Fix it by setting it to 1 as required.

Cc:Shawn Guo <shawnguo at kernel.org>
Cc: Sascha Hauer <s.hauer at pengutronix.de>
Signed-off-by: Sudeep Holla <sudeep.holla at arm.com>
---
 arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
index a987ff7156bd..09f7364dd1d0 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
@@ -132,7 +132,7 @@ scmi_devpd: protocol at 11 {
 
 			scmi_sensor: protocol at 15 {
 				reg = <0x15>;
-				#thermal-sensor-cells = <0>;
+				#thermal-sensor-cells = <1>;
 			};
 		};
 	};
-- 
2.25.1