[PATCH 3/3] arm64: dts: rockchip: Add Pine64 PineNote board
Johan Jonker
jbx6244 at gmail.com
Wed Feb 2 02:41:25 PST 2022
Hi Samuel,
Some comments, have a look if it's useful.
Could you test with:
ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- make dtbs_check
dtc -I dtb -O dts rk3566-pinenote-v1.2.dtb
Fix a few notifications.
Johan
On 1/30/22 06:38, Samuel Holland wrote:
> The PineNote is a tablet from Pine64 based on the RK3566 SoC, featuring
> 4G/128G of storage, a 10.3" electrophoretic display (EPD) with two-color
> frontlight, both EMR and capacitive digitizers, dual-band wireless,
> quad-channel digital microphones, and stereo speakers.
>
> There are two existing variants of the board. v1.1 was contained in some
> early samples, and v1.2 was sold as the "PineNote Developer Edition".
>
> Signed-off-by: Samuel Holland <samuel at sholland.org>
> ---
>
> arch/arm64/boot/dts/rockchip/Makefile | 2 +
> .../dts/rockchip/rk3566-pinenote-v1.1.dts | 18 +
> .../dts/rockchip/rk3566-pinenote-v1.2.dts | 18 +
> .../boot/dts/rockchip/rk3566-pinenote.dtsi | 638 ++++++++++++++++++
> 4 files changed, 676 insertions(+)
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-pinenote-v1.1.dts
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-pinenote-v1.2.dts
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
>
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index 479906f3ad7b..2e67f2558b6a 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -56,5 +56,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote-v1.1.dts b/arch/arm64/boot/dts/rockchip/rk3566-pinenote-v1.1.dts
> new file mode 100644
> index 000000000000..1901a456e91b
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote-v1.1.dts
> @@ -0,0 +1,18 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +
> +/dts-v1/;
> +
> +#include "rk3566-pinenote.dtsi"
> +
> +/ {
> + model = "Pine64 PineNote v1.1";
> + compatible = "pine64,pinenote-v1.1", "pine64,pinenote", "rockchip,rk3566";
> +};
> +
> +&spk_amp {
sort node names
> + VCC-supply = <&dcdc_boost>;
> +};
> +
> +&pmu_io_domains {
> + vccio7-supply = <&vcc_1v8>;
> +};
> diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote-v1.2.dts b/arch/arm64/boot/dts/rockchip/rk3566-pinenote-v1.2.dts
> new file mode 100644
> index 000000000000..d7f5372fc40f
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote-v1.2.dts
> @@ -0,0 +1,18 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +
> +/dts-v1/;
> +
> +#include "rk3566-pinenote.dtsi"
> +
> +/ {
> + model = "Pine64 PineNote v1.2";
> + compatible = "pine64,pinenote-v1.2", "pine64,pinenote", "rockchip,rk3566";
> +};
> +
> +&spk_amp {
sort node names
> + VCC-supply = <&vcc_bat>;
> +};
> +
> +&pmu_io_domains {
> + vccio7-supply = <&vcc_3v3>;
> +};
> diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
> new file mode 100644
> index 000000000000..0d8f4db3901d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
> @@ -0,0 +1,638 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/gpio-keys.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/pinctrl/rockchip.h>
> +
> +#include "rk3566.dtsi"
> +
> +/ {
> + aliases {
> + mmc0 = &sdhci;
> + };
> +
> + chosen {
> + stdout-path = "serial2:1500000n8";
> + };
> +
> + adc-keys-0 {
There's only one adc-key node.
Are you expecting more of them?
Maybe use:
adc-keys {
> + compatible = "adc-keys";
> + io-channels = <&saradc 0>;
> + io-channel-names = "buttons";
> + keyup-threshold-microvolt = <1750000>;
> +
> + button-recovery {
recovery {
> + label = "Recovery";
label = "recovery";
This shows up in a user space path.
People don't like typing camel cases.
Stay in line with other boards.
> + linux,code = <KEY_VENDOR>;
> + press-threshold-microvolt = <0>;
> + };
> + };
> +
> + spk_amp: audio-amplifier {
sort node names
> + compatible = "simple-audio-amplifier";
> + enable-gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
> + pinctrl-0 = <&spk_amp_enable_h>;
> + pinctrl-names = "default";
> + sound-name-prefix = "Speaker Amp";
> + };
> +
> + dmic_codec: dmic-codec {
> + compatible = "dmic-codec";
> + num-channels = <6>;
> + #sound-dai-cells = <0>;
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + pinctrl-0 = <&hall_int_l>;
> + pinctrl-names = "default";
> +
> + switch-cover {
cover {
> + label = "Cover";
label = "cover";
This shows up in a user space path.
People don't like typing camel cases.
Stay in line with other boards.
> + gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>;
> + linux,input-type = <EV_SW>;
> + linux,code = <SW_MACHINE_COVER>;
> + linux,can-disable;
> + wakeup-event-action = <EV_ACT_DEASSERTED>;
> + wakeup-source;
> + };
> + };
> +
> + gpio-leds {
> + compatible = "gpio-leds";
> + pinctrl-0 = <&led_gpio>;
pinctrl-0 = <&led_pin>;
gpio is a reserved node name.
~/.local/lib/python3.7/site-packages/dtschema/schemas/gpio/gpio-consumer.yaml
> + pinctrl-names = "default";
> +
> + led-0 {
> + color = <LED_COLOR_ID_WHITE>;
> + function = LED_FUNCTION_CHARGING;
> + gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>;
> + };
> + };
> +
> + sdio_pwrseq: sdio-pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + clocks = <&rk817 1>;
> + clock-names = "ext_clock";
> + pinctrl-0 = <&wifi_enable_h>;
> + pinctrl-names = "default";
> + reset-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>;
> + };
> +
> + sound {
> + compatible = "simple-audio-card";
> + #address-cells = <1>;
> + #size-cells = <0>;
Move thing that start with "#" down the list as possible.
> + simple-audio-card,name = "PineNote";
> + simple-audio-card,aux-devs = <&spk_amp>;
> + simple-audio-card,widgets = "Headphone", "Headphones",
> + "Speaker", "Internal Speakers";
> + simple-audio-card,routing = "Headphones", "HPOL",
> + "Headphones", "HPOR",
> + "Internal Speakers", "Speaker Amp OUTL",
> + "Internal Speakers", "Speaker Amp OUTR",
> + "Speaker Amp INL", "HPOL",
> + "Speaker Amp INR", "HPOR";
> + simple-audio-card,pin-switches = "Internal Speakers";
> +
> + simple-audio-card,dai-link at 0 {
<stdout>: Warning (unit_address_vs_reg):
/sound/simple-audio-card,dai-link at 0: node has a unit name, but no reg
property
> + format = "i2s";
> + mclk-fs = <256>;
> + frame-master = <&link0_cpu>;
> + bitclock-master = <&link0_cpu>;
> +
> + link0_cpu: cpu {
> + sound-dai = <&i2s1_8ch>;
> + };
> +
> + link0_codec: codec {
> + sound-dai = <&rk817>;
> + };
> + };
> +
> + simple-audio-card,dai-link at 1 {
<stdout>: Warning (unit_address_vs_reg):
/sound/simple-audio-card,dai-link at 1: node has a unit name, but no reg
property
> + format = "pdm";
> + frame-master = <&link1_cpu>;
> + bitclock-master = <&link1_cpu>;
> +
> + link1_cpu: cpu {
> + sound-dai = <&pdm>;
> + };
> +
> + link1_codec: codec {
> + sound-dai = <&dmic_codec>;
> + };
> + };
> + };
> +
> + vbat_4g: vbat-4g {
> + compatible = "regulator-fixed";
> + regulator-name = "vbat_4g";
> + regulator-min-microvolt = <3800000>;
> + regulator-max-microvolt = <3800000>;
> + /* powered by vcc_bat, enabled by vbat_4g_en */
> + vin-supply = <&vbat_4g_en>;
> + };
> +
> + vcc_1v8: vcc-1v8 {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc_1v8";
> + regulator-always-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + /* powered by vcc_sys, enabled by vcc_1v8_en */
> + vin-supply = <&vcc_1v8_en>;
> + };
> +
> + vcc_bat: vcc-bat {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc_bat";
> + regulator-always-on;
> + regulator-min-microvolt = <3800000>;
> + regulator-max-microvolt = <3800000>;
> + };
> +
> + vcc_hall_3v3: vcc-hall-3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc_hall_3v3";
> + regulator-always-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + vin-supply = <&vcc_sys>;
> + };
> +
> + vcc_sys: vcc-sys {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc_sys";
> + regulator-always-on;
> + regulator-min-microvolt = <3800000>;
> + regulator-max-microvolt = <3800000>;
> + vin-supply = <&vcc_bat>;
> + };
> +
> + vcc_wl: vcc-wl {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
> + pinctrl-0 = <&vcc_wl_gpio>;
> + pinctrl-names = "default";
> + regulator-name = "vcc_wl";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + vin-supply = <&vcc_bat>;
> + };
> +
> + vdda_0v9: vdda-0v9 {
> + compatible = "regulator-fixed";
> + regulator-name = "vdda_0v9";
> + regulator-always-on;
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <900000>;
> + /* powered by vcc_sys, enabled by vcc_1v8_en */
> + vin-supply = <&vcc_1v8_en>;
> + };
> +};
> +
> +&cpu0 {
> + cpu-supply = <&vdd_cpu>;
> +};
> +
> +&cpu1 {
> + cpu-supply = <&vdd_cpu>;
> +};
> +
> +&cpu2 {
> + cpu-supply = <&vdd_cpu>;
> +};
> +
> +&cpu3 {
> + cpu-supply = <&vdd_cpu>;
> +};
> +
> +&i2c0 {
> + status = "okay";
> +
> + vdd_cpu: regulator at 1c {
> + compatible = "tcs,tcs4525";
> + reg = <0x1c>;
> + fcs,suspend-voltage-selector = <0>;
> + regulator-name = "vdd_cpu";
> + regulator-min-microvolt = <712500>;
> + regulator-max-microvolt = <1390000>;
> + regulator-ramp-delay = <2300>;
> + regulator-always-on;
> + vin-supply = <&vcc_sys>;
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> +
> + rk817: pmic at 20 {
> + compatible = "rockchip,rk817";
> + reg = <0x20>;
> + interrupt-parent = <&gpio0>;
> + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
> + assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
> + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
> + clocks = <&cru I2S1_MCLKOUT_TX>;
> + clock-names = "mclk";
> + #clock-cells = <1>;
> + pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>, <&pmic_sleep>;
> + pinctrl-names = "default";
> + rockchip,system-power-controller;
> + #sound-dai-cells = <0>;
> + wakeup-source;
> +
> + vcc1-supply = <&vcc_sys>;
> + vcc2-supply = <&vcc_sys>;
> + vcc3-supply = <&vcc_sys>;
> + vcc4-supply = <&vcc_sys>;
> + vcc5-supply = <&vcc_sys>;
> + vcc6-supply = <&vcc_sys>;
> + vcc7-supply = <&vcc_sys>;
> + vcc8-supply = <&vcc_sys>;
> + vcc9-supply = <&dcdc_boost>;
> +
> + regulators {
> + vdd_logic: DCDC_REG1 {
> + regulator-name = "vdd_logic";
> + regulator-always-on;
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-init-microvolt = <900000>;
> + regulator-ramp-delay = <6001>;
> + regulator-initial-mode = <0x2>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + regulator-suspend-microvolt = <900000>;
> + };
> + };
> +
> + vdd_gpu_npu: DCDC_REG2 {
> + regulator-name = "vdd_gpu_npu";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-init-microvolt = <900000>;
> + regulator-ramp-delay = <6001>;
> + regulator-initial-mode = <0x2>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_ddr: DCDC_REG3 {
> + regulator-name = "vcc_ddr";
> + regulator-always-on;
> + regulator-initial-mode = <0x2>;
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> +
> + vcc_3v3: DCDC_REG4 {
> + regulator-name = "vcc_3v3";
> + regulator-always-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-initial-mode = <0x2>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcca_1v8_pmu: LDO_REG1 {
> + regulator-name = "vcca_1v8_pmu";
> + regulator-always-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> +
> + /* unused */
> + vdda_0v9_ldo: LDO_REG2 {
> + regulator-name = "vdda_0v9_ldo";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <900000>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdda_0v9_pmu: LDO_REG3 {
> + regulator-name = "vdda_0v9_pmu";
> + regulator-always-on;
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <900000>;
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> +
> + vccio_acodec: LDO_REG4 {
> + regulator-name = "vccio_acodec";
> + regulator-always-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + /* unused */
> + vccio_sd: LDO_REG5 {
> + regulator-name = "vccio_sd";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_3v3_pmu: LDO_REG6 {
> + regulator-name = "vcc_3v3_pmu";
> + regulator-always-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> +
> + vcc_1v8_en: LDO_REG7 {
> + regulator-name = "vcc_1v8_en";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vbat_4g_en: LDO_REG8 {
> + regulator-name = "vbat_4g_en";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + sleep_sta_ctl: LDO_REG9 {
> + regulator-name = "sleep_sta_ctl";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> +
> + dcdc_boost: BOOST {
> + regulator-name = "boost";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + otg_switch: OTG_SWITCH {
> + regulator-name = "otg_switch";
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> + };
> + };
> +};
> +
> +&i2c1 {
> + status = "okay";
> +
> + digitizer at 9 {
> + compatible = "wacom,w9013", "hid-over-i2c";
> + reg = <0x09>;
> + hid-descr-addr = <0x1>;
> + interrupt-parent = <&gpio0>;
> + interrupts = <RK_PB6 IRQ_TYPE_LEVEL_LOW>;
> + pinctrl-0 = <&pen_fwe>, <&pen_irq_l>, <&pen_rst_l>;
> + pinctrl-names = "default";
> + vdd-supply = <&vcc_3v3_pmu>;
> + };
> +};
> +
> +&i2c3 {
> + pinctrl-0 = <&i2c3m1_xfer>;
> + status = "okay";
> +
> + led-controller at 36 {
> + compatible = "ti,lm3630a";
> + reg = <0x36>;
> + #address-cells = <1>;
> + #size-cells = <0>;
Move thing that start with "#" down the list as possible.
> + enable-gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
> + pinctrl-0 = <&backlight_hwen_h>;
> + pinctrl-names = "default";
> +
> + led at 0 {
> + reg = <0>;
> + label = "backlight_cool";
> + default-brightness = <0>;
> + };
> +
> + led at 1 {
> + reg = <1>;
> + label = "backlight_warm";
> + default-brightness = <0>;
> + };
> + };
> +};
> +
> +&i2s1_8ch {
> + pinctrl-0 = <&i2s1m0_lrcktx>, <&i2s1m0_sclktx>, <&i2s1m0_sdi0>, <&i2s1m0_sdo0>;
> + rockchip,trcm-sync-tx-only;
> + status = "okay";
> +};
> +
> +&pdm {
> + pinctrl-0 = <&pdmm0_clk1>, <&pdmm0_sdi1>, <&pdmm0_sdi2>;
> + /* microphones are on channels 1 and 2 */
> + rockchip,path-map = <1>, <2>, <0>, <3>;
> + status = "okay";
> +};
> +
> +&pinctrl {
> + audio-amplifier {
> + spk_amp_enable_h: spk-amp-enable-h {
> + rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + backlight {
> + backlight_hwen_h: backlight-hwen-h {
> + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + bt {
> + bt_enable_h: bt-enable-h {
> + rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + bt_host_wake_l: bt-host-wake-l {
> + rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> +
> + bt_wake_h: bt-wake-h {
> + rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + led {
> + led_gpio: led-gpio {
led_pin: led-pin {
gpio is a reserved node name.
~/.local/lib/python3.7/site-packages/dtschema/schemas/gpio/gpio-consumer.yaml
> + rockchip,pins = <3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + hall {
Maybe use:
key {
Keep node name above and in pinctrl aligned.
> + hall_int_l: hall-int-l {
> + rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + pen {
> + pen_fwe: pen-fwe {
> + rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
> + };
> +
> + pen_irq_l: pen-irq-l {
> + rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + pen_rst_l: pen-rst-l {
> + rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + pmic {
> + pmic_int_l: pmic-int-l {
> + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + pmic_sleep: pmic-sleep {
> + rockchip,pins = <0 RK_PA2 1 &pcfg_pull_none>;
> + };
> + };
> +
> + sdio-pwrseq {
> + wifi_enable_h: wifi-enable-h {
> + rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + vcc-wl {
> + vcc_wl_gpio: vcc-wl-gpio {
vcc_wl_pin: vcc-wl-pin {
gpio is a reserved node name.
~/.local/lib/python3.7/site-packages/dtschema/schemas/gpio/gpio-consumer.yaml
> + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + wifi {
> + wifi_host_wake_l: wifi-host-wake-l {
> + rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +};
> +
> +&pmu_io_domains {
> + pmuio1-supply = <&vcc_3v3_pmu>;
> + pmuio2-supply = <&vcc_3v3_pmu>;
> + vccio1-supply = <&vccio_acodec>;
> + vccio2-supply = <&vcc_1v8>;
> + vccio3-supply = <&vcc_3v3>;
> + vccio4-supply = <&vcca_1v8_pmu>;
> + vccio5-supply = <&vcc_3v3>;
> + vccio6-supply = <&vcc_3v3>;
> + status = "okay";
> +};
> +
> +&saradc {
> + vref-supply = <&vcc_1v8>;
> + status = "okay";
> +};
> +
> +&sdhci {
> + bus-width = <8>;
> + mmc-hs200-1_8v;
> + non-removable;
> + pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>, <&emmc_datastrobe>, <&emmc_rstnout>;
> + pinctrl-names = "default";
> + vmmc-supply = <&vcc_3v3>;
> + vqmmc-supply = <&vcc_1v8>;
> + status = "okay";
> +};
> +
> +&sdmmc1 {
> + bus-width = <4>;
> + cap-sd-highspeed;
> + cap-sdio-irq;
> + disable-wp;
>From mmc-controller.yaml:
disable-wp:
$ref: /schemas/types.yaml#/definitions/flag
description:
When set, no physical write-protect line is present. This
property should only be specified when the controller has a
dedicated write-protect detection logic. If a GPIO is always used
for the write-protect detection logic, it is sufficient to not
specify the wp-gpios property in the absence of a write-protect
line. Not used in combination with eMMC or SDIO.
> + keep-power-in-suspend;
> + mmc-pwrseq = <&sdio_pwrseq>;
> + non-removable;
> + pinctrl-0 = <&sdmmc1_bus4>, <&sdmmc1_clk>, <&sdmmc1_cmd>;
> + pinctrl-names = "default";
> + sd-uhs-sdr104;
> + vmmc-supply = <&vcc_wl>;
> + vqmmc-supply = <&vcca_1v8_pmu>;
> + status = "okay";
> +};
> +
> +&tsadc {
> + /* tshut mode 0:CRU 1:GPIO */
> + rockchip,hw-tshut-mode = <1>;
> + /* tshut polarity 0:LOW 1:HIGH */
> + rockchip,hw-tshut-polarity = <0>;
> + status = "okay";
> +};
> +
> +&uart1 {
> + pinctrl-0 = <&uart1m0_ctsn>, <&uart1m0_rtsn>, <&uart1m0_xfer>;
> + pinctrl-names = "default";
> + uart-has-rtscts;
> + status = "okay";
> +
> + bluetooth {
> + compatible = "brcm,bcm43438-bt";
> + clocks = <&rk817 1>;
> + clock-names = "lpo";
> + device-wake-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
> + host-wake-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
> + reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
> + pinctrl-0 = <&bt_enable_h>, <&bt_host_wake_l>, <&bt_wake_h>;
> + pinctrl-names = "default";
> + vbat-supply = <&vcc_wl>;
> + vddio-supply = <&vcca_1v8_pmu>;
> + };
> +};
> +
> +&uart2 {
> + status = "okay";
> +};
More information about the linux-arm-kernel
mailing list