[PATCH v28 0/4] media: mediatek: support mdp3 on mt8183 platform
Matthias Brugger
matthias.bgg at gmail.com
Thu Aug 25 06:07:17 PDT 2022
On 25/08/2022 04:41, moudy ho wrote:
> Hi Matthias,
>
> As a friendly reminder, I found out that patches 1 and 2 are already on
> the Hans's git, hopefully it won't cause you any trouble dealing with
> this series
>
Thanks for the heads-up I removed them from my tree now.
Regards,
Matthias
> Regards,
> Moudy
>
> On Thu, 2022-08-25 at 10:06 +0800, moudy ho wrote:
>> On Wed, 2022-08-24 at 13:32 +0200, Matthias Brugger wrote:
>>> Patches 1, 2 and 3 now applied to v6.0-next/dts64
>>>
>>> Thanks!
>>> Matthias
>>>
>>
>> Hi Matthias,
>>
>> Thanks for your kind assistance.
>>
>> Respectfully,
>> Moudy
>>
>>> On 23/08/2022 04:37, Moudy Ho wrote:
>>>> Change since v27:
>>>> - Rebase on v6.0-rc2
>>>> - Delete duplicate config in MDP3 Kconfig
>>>> - Relist maintainers in newly added bindings
>>>> - Minor changes in mtk-mdp3-comp.c and mtk-mdp3-reg.c to
>>>> avoid unnecessary long line warnings.
>>>> - The v4l2-compliance test results are the same as v26.
>>>>
>>>> Change since v26:
>>>> - Set MMSYS config from "depend on" to "select" in MDP3 Kconfig
>>>> to avoid compilation errors of various combinations.
>>>> - Fix cast to smaller integer type 'enum mdp_comp_type' from
>>>> 'const void *' in mtk_mdp3_comp.c.
>>>> - Fix sparse warnings in mtk_mdp3_comp.c.
>>>> - The v4l2-compliance test results are the same as v26.
>>>>
>>>> Change since v25:
>>>> - Add more COMPILE_TEST config in MDP3 Kconfig
>>>> - Adjust unnecessary log level in "mdp_m2m_s_selection" function
>>>> to
>>>> avoid spamming the kernel log for userspace errors.
>>>> - The v4l2-compliance test results list is as follows:
>>>>
>>>> v4l2-compliance 1.23.0-4942, 32 bits, 32-bit time_t
>>>> v4l2-compliance SHA: 4cf258c24026 2022-07-28 15:43:45
>>>>
>>>> Compliance test for mtk-mdp3 device /dev/video0:
>>>>
>>>> Driver Info:
>>>> Driver name : mtk-mdp3
>>>> Card type : MediaTek MDP3
>>>> Bus info : platform:14001000.mdp3-rdma0
>>>> Driver version : 6.0.0
>>>> Capabilities : 0x84204000
>>>> Video Memory-to-Memory Multiplanar
>>>> Streaming
>>>> Extended Pix Format
>>>> Device Capabilities
>>>> Device Caps : 0x04204000
>>>> Video Memory-to-Memory Multiplanar
>>>> Streaming
>>>> Extended Pix Format
>>>> Required ioctls:
>>>> test VIDIOC_QUERYCAP: OK
>>>> test invalid ioctls: OK
>>>> Allow for multiple opens:
>>>> test second /dev/video0 open: OK
>>>> test VIDIOC_QUERYCAP: OK
>>>> test VIDIOC_G/S_PRIORITY: OK
>>>> test for unlimited opens: OK
>>>> Debug ioctls:
>>>> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
>>>> test VIDIOC_LOG_STATUS: OK (Not Supported)
>>>> Input ioctls:
>>>> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not
>>>> Supported)
>>>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>>>> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
>>>> test VIDIOC_ENUMAUDIO: OK (Not Supported)
>>>> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
>>>> test VIDIOC_G/S_AUDIO: OK (Not Supported)
>>>> Inputs: 0 Audio Inputs: 0 Tuners: 0
>>>> Output ioctls:
>>>> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
>>>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>>>> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
>>>> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
>>>> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
>>>> Outputs: 0 Audio Outputs: 0 Modulators: 0
>>>> Input/Output configuration ioctls:
>>>> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
>>>> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not
>>>> Supported)
>>>> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
>>>> test VIDIOC_G/S_EDID: OK (Not Supported)
>>>> Control ioctls:
>>>> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
>>>> test VIDIOC_QUERYCTRL: OK
>>>> test VIDIOC_G/S_CTRL: OK
>>>> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
>>>> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
>>>> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
>>>> Standard Controls: 4 Private Controls: 0
>>>> Format ioctls:
>>>> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
>>>> test VIDIOC_G/S_PARM: OK (Not Supported)
>>>> test VIDIOC_G_FBUF: OK (Not Supported)
>>>> test VIDIOC_G_FMT: OK
>>>> test VIDIOC_TRY_FMT: OK
>>>> test VIDIOC_S_FMT: OK
>>>> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
>>>> test Cropping: OK
>>>> test Composing: OK
>>>> test Scaling: OK
>>>> Codec ioctls:
>>>> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
>>>> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
>>>> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>>>> Buffer ioctls:
>>>> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
>>>> test VIDIOC_EXPBUF: OK
>>>> test Requests: OK (Not Supported)
>>>> test TIME32/64: OK
>>>> Test input 0:
>>>> Streaming ioctls:
>>>> test read/write: OK (Not Supported)
>>>> test blocking wait: OK
>>>> <snip>
>>>> test MMAP (no poll): OK
>>>> <snip>
>>>> test MMAP (select): OK
>>>> <snip>
>>>> test MMAP (epoll): OK
>>>> test USERPTR (no poll): OK (Not Supported)
>>>> test USERPTR (select): OK (Not Supported)
>>>> test DMABUF: Cannot test, specify --expbuf-device
>>>> Stream using all formats:
>>>> <snip>
>>>> Total for mtk-mdp3 device /dev/video0: 1592, Succeeded: 1592,
>>>> Failed: 0, Warnings: 0
>>>>
>>>> Change since v24:
>>>> - Rebase on v6.0-rc1.
>>>>
>>>> Change since v23:
>>>> - Rebase on linux-next.
>>>> - Fix compilation error.
>>>>
>>>> Change since v22:
>>>> - Rebase on linux-next.
>>>> - Fix typo about MDP3 in Kconfig.
>>>> - Adjust some non-essential logs to lower levels.
>>>>
>>>> Change since v21:
>>>> - Rebase on linux-next.
>>>> - Following Hans suggestion, remove redundant kernel logs and
>>>> revise a few non-functional code to make it clearer.
>>>> - Remove API abuse to set plane size.
>>>> - Added VPU send message failure error code for previous
>>>> shortages.
>>>>
>>>> Change since v20:
>>>> - Rebase on linux-next.
>>>> - Move the MDP3 GCE events to the corresponding node and adjust
>>>> the
>>>> relevant driver settings.
>>>>
>>>> Change since v19:
>>>> - Rebase on linux-next.
>>>> - Export the function "mdp_cmdq_send" suggected by CK.
>>>> - Fix "Macro argument reuse" reported by checkpatch.pl
>>>>
>>>> Change since v18:
>>>> - Rebase on linux-next.
>>>> - Adjust copyright date of MDP3 driver.
>>>> - Functions renaming as follows:
>>>> [1] is_output_disable() => is_output_disabled()
>>>> [2] mdp_component_init() => mdp_comp_config()
>>>> [3] mdp_component_deinit() => mdp_comp_destroy()
>>>> [4] mdp_comp_ctx_init() => mdp_comp_ctx_config()
>>>> [5] mdp_sub_comps_create() => mdp_comp_sub_create()
>>>> - Document MDP3 10-bit format descriptions in "mtk-mdp3-regs.c".
>>>> - Add error control for functions mdp_comp_clocks_on and
>>>> mdp_comp_clock_on.
>>>> - Moved function "mtk_mutex_put" from function
>>>> "mdp_comp_destroy"(renamed from mdp_component_deinit) to avoid
>>>> semantic ambiguity.
>>>> - For some allocated parameters, assign a value of NULL after
>>>> freeing
>>>> to avoid the possibility of repeated use.
>>>> - Removed unnecessary timestamp pass flow.
>>>> - About parameters passed by the user in function
>>>> "mdp_try_fmt_mplane", add relevant checks to
>>>> clamp them in a reasonable range to avoid the possibility of
>>>> overflow
>>>>
>>>> Change since v17:
>>>> - Depend on:
>>>> [1]
>>>>
> https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=649104__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8imRuenzc$
>>>>
>>>> - In response to future CMDQ api changes listed below:
>>>>
>>>>
> https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/patch/20220608144055.27562-1-chunkuang.hu@kernel.org/__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8iul-Frc3$
>>>>
>>>> adjust CMDQ flush and callback flow in MDP3.
>>>>
>>>> Change since v16:
>>>> - Rebased on v5.19-rc1
>>>> - Depend on:
>>>> [1]
>>>>
> https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=646131__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8ivEMBOlg$
>>>>
>>>> - In response to MUTEX changes, adjust API naming and parameters
>>>> when
>>>> used in function "mdp_path_subfrm_require".
>>>> - Remove unnecessary MDP3 phandle in 8183 dts.
>>>>
>>>> Change since v15:
>>>> - Depend on:
>>>> [1]
>>>>
> https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=640926__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8ilOzZXlo$
>>>>
>>>> - Split the bindings under ./soc/mediatek into a separate patch.
>>>> - Fix data abort in "mdp_auto_release_work"
>>>> - Adjust the steps in the function "mdp_cmdq_send" to make the
>>>> error handling
>>>> more reasonable
>>>>
>>>> Change since v14:
>>>> - Rebase on v5.18-rc6
>>>> - Depend on:
>>>> [1]
>>>>
> https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=640926__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8ilOzZXlo$
>>>>
>>>> - In response to CMDQ API change, replace the function
>>>> "cmdq_pkt_flush_async"
>>>> with the standard APIs of mbox
>>>> - Fix the description of "mediatek,gce-client-reg" property in
>>>> MDP3-related
>>>> bindings
>>>>
>>>> Change since v13:
>>>> - Rebase on v5.18-rc4
>>>> - Depend on:
>>>> [1]
>>>>
> https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=636041__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8itpp6cBE$
>>>>
>>>> - Remove advanced functionality about ISP settings for direct
>>>> link
>>>> cases.
>>>> - Remove the software designation in the mt8183 dts and
>>>> revise corresponding bindings.
>>>>
>>>> Change since v12:
>>>> - Rebase on linux-next
>>>> - Depend on:
>>>> [1]
>>>>
> https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=630948__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8immtSFit$
>>>>
>>>> - Remove messages related to routing information in MDP3, and
>>>> leave
>>>> the related
>>>> settings in MMSYS.
>>>> - Remove unnecessary phandle and redundant property in RDMA dt-
>>>> binding and
>>>> adjust the corresponding driver.
>>>> - Revise MDP3 node name in dts.
>>>> - Removed unnecessary functions, mutex and work queue in MDP3
>>>> driver
>>>> - Fixed format mapping error for V4L2_PIX_FMT_RGB565X
>>>>
>>>> Change since v11:
>>>> - Rebase on linux-next tag:next-20220316
>>>> - Depend on:
>>>> [1]
>>>>
> https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=624281__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8iu7IwX8m$
>>>>
>>>> - Remove redundant hardware index in data-binding suggested by
>>>> Rob
>>>> Herring.
>>>> - Referring to Rob Herring's suggestion to improve some
>>>> descriptions in the
>>>> RDMA dt-binding
>>>> - Move MDP3 file folder from "./drive/media/platform/mtk-mdp3" to
>>>> "./driver/media/platform/mediatek/mdp3"
>>>> - Fixed the V4L2 and MDP color format mapping error in RGB565
>>>> which
>>>> checked by Benjamin Gaignard
>>>>
>>>> Change since v10:
>>>> - The routing table needs to be discarded, and the calculation
>>>> result
>>>> on the SCP side is used to write a suitable mux setting for
>>>> 1 input port and 2 output ports.
>>>> - Adjust dts parsing flow to remove redundant HW IDs.
>>>> - Fix memory leak caused by no free path information in function
>>>> "mdp_cmdq_send".
>>>>
>>>> Change since v9:
>>>> - Keep only the MDP3 driver patches and split the remaining mmsys
>>>> and
>>>> mutex patches into another mail.
>>>> - Move mutex mod settings to corresponding driver and make
>>>> relevant
>>>> adjustments
>>>> for this in MDP3 driver.
>>>> - Fix compile warning reported by kernel test robot.
>>>>
>>>> Change since v8:
>>>> - Rebase on v5.16-rc2.
>>>> - Refer to Angelo's suggestion, adjust the register writing
>>>> format
>>>> to increase
>>>> readability and significance.
>>>> - Refer to Angelo's suggestion, adjust or reduce inappropriate
>>>> debugging
>>>> messages.
>>>> - Refer to Rob Herring's suggestion to correct the the binding
>>>> file
>>>> to make it with the specification.
>>>> - Fix compile warning reported by kernel test robot.
>>>>
>>>> Change since v7:
>>>> - Rebase on v5.15-rc6.
>>>> - Revise several V4L2 M2M settings to pass v4l2-compliance test.
>>>> - Integrate those same component dt-binding documents of DRM and
>>>> MDP, and
>>>> move them under the MMSYS domain.
>>>> - Split MMSYS and MUTEX into two different files according to
>>>> their functional properties.
>>>>
>>>> Changes since v6:
>>>> - Refactor GCE event to corresponding node.
>>>> - Fix dt_binding_check fail.
>>>> - Fix compilation errors.
>>>>
>>>> Changes since v5:
>>>> - Rebase on v5.14-rc6.
>>>> - Move MMSYS/Mutex settings to corresponding driver.
>>>> - Revise the software license description and copyright.
>>>> - Remove unnecessary enum. or definitions.
>>>> - Optimize platform/chip definition conditions.
>>>> - Use general printing functions instead of MDP3 private ones.
>>>> - Fix compile warning.
>>>>
>>>> Changes since v4:
>>>> - Rebase on v5.13-rc1.
>>>> - Remove the CMDQ flush flow to match the CMDQ API change.
>>>> - Integrate four of MDP's direct-link subcomponents into MDP
>>>> controller node
>>>> from syscon node to avoid illegal clock usage.
>>>> - Rewrite dt-binding in a JSON compatible subset of YAML
>>>> - Fix a bit of macro argument precedence.
>>>>
>>>> Changes since v3:
>>>> - Rebase on v5.9-rc1.
>>>> - modify code for review comment from Rob Herring, cancel
>>>> multiple
>>>> nodes using
>>>> same register base situation.
>>>> - control IOMMU port through pm runtime get/put to DMA
>>>> components'
>>>> device.
>>>> - SCP(VPU) driver revision.
>>>> - stop queuing jobs(remove flush_workqueue()) after
>>>> mdp_m2m_release().
>>>> - add computation of plane address with data_offset.
>>>> - fix scale ratio check issue.
>>>> - add default v4l2_format setting.
>>>>
>>>> Changes since v2:
>>>> - modify code for review comment from Tomasz Figa & Alexandre
>>>> Courbot
>>>> - review comment from Rob Herring will offer code revision in v4,
>>>> due to
>>>> it's related to device node modification, will need to modify
>>>> code
>>>> architecture
>>>>
>>>> Changes since v1:
>>>> - modify code for CMDQ v3 API support
>>>> - EC ipi cmd migration
>>>> - fix compliance test fail item (m2m cmd with -f) due to there is
>>>> two problem in
>>>> runing all format(-f) cmd:
>>>> 1. out of memory before test complete
>>>> Due to capture buffer mmap (refcount + 1) after reqbuf
>>>> but
>>>> seems
>>>> no corresponding munmap called before device close.
>>>> There are total 12XX items(formats) in format test and
>>>> each format
>>>> alloc 8 capture/output buffers.
>>>> 2. unceasingly captureBufs() (randomly)
>>>> Seems the break statement didn't catch the count == 0
>>>> situation:
>>>> In v4l2-test-buffers.cpp, function: captureBufs()
>>>> ...
>>>> count--;
>>>> if (!node->is_m2m && !count)
>>>> break;
>>>> Log is as attachment
>>>>
>>>> Hi,
>>>>
>>>> This patch is used to present Media Data Path 3 (MDP3)
>>>> which provided scaling and color format conversion.
>>>> support using GCE to write register in critical time limitation.
>>>> support V4L2 m2m device control.
>>>>
>>>>
>>>> Moudy Ho (4):
>>>> dt-binding: mediatek: add bindings for MediaTek MDP3
>>>> components
>>>> dt-binding: mediatek: add bindings for MediaTek CCORR and WDMA
>>>> arm64: dts: mt8183: add MediaTek MDP3 nodes
>>>> media: platform: mtk-mdp3: add MediaTek MDP3 driver
>>>>
>>>> .../bindings/media/mediatek,mdp3-rdma.yaml | 95 ++
>>>> .../bindings/media/mediatek,mdp3-rsz.yaml | 77 ++
>>>> .../bindings/media/mediatek,mdp3-wrot.yaml | 80 ++
>>>> .../bindings/soc/mediatek/mediatek,ccorr.yaml | 68 ++
>>>> .../bindings/soc/mediatek/mediatek,wdma.yaml | 81 ++
>>>> arch/arm64/boot/dts/mediatek/mt8183.dtsi | 63 +
>>>> drivers/media/platform/mediatek/Kconfig | 1 +
>>>> drivers/media/platform/mediatek/Makefile | 1 +
>>>> drivers/media/platform/mediatek/mdp3/Kconfig | 20 +
>>>> drivers/media/platform/mediatek/mdp3/Makefile | 6 +
>>>> .../platform/mediatek/mdp3/mdp_reg_ccorr.h | 19 +
>>>> .../platform/mediatek/mdp3/mdp_reg_rdma.h | 65 ++
>>>> .../platform/mediatek/mdp3/mdp_reg_rsz.h | 39 +
>>>> .../platform/mediatek/mdp3/mdp_reg_wdma.h | 47 +
>>>> .../platform/mediatek/mdp3/mdp_reg_wrot.h | 55 +
>>>> .../platform/mediatek/mdp3/mtk-img-ipi.h | 290 +++++
>>>> .../platform/mediatek/mdp3/mtk-mdp3-cmdq.c | 466 ++++++++
>>>> .../platform/mediatek/mdp3/mtk-mdp3-cmdq.h | 43 +
>>>> .../platform/mediatek/mdp3/mtk-mdp3-comp.c | 1033
>>>> +++++++++++++++++
>>>> .../platform/mediatek/mdp3/mtk-mdp3-comp.h | 186 +++
>>>> .../platform/mediatek/mdp3/mtk-mdp3-core.c | 357 ++++++
>>>> .../platform/mediatek/mdp3/mtk-mdp3-core.h | 94 ++
>>>> .../platform/mediatek/mdp3/mtk-mdp3-m2m.c | 724
>>>> ++++++++++++
>>>> .../platform/mediatek/mdp3/mtk-mdp3-m2m.h | 48 +
>>>> .../platform/mediatek/mdp3/mtk-mdp3-regs.c | 735
>>>> ++++++++++++
>>>> .../platform/mediatek/mdp3/mtk-mdp3-regs.h | 373 ++++++
>>>> .../platform/mediatek/mdp3/mtk-mdp3-vpu.c | 313 +++++
>>>> .../platform/mediatek/mdp3/mtk-mdp3-vpu.h | 78 ++
>>>> 28 files changed, 5457 insertions(+)
>>>> create mode 100644
>>>> Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
>>>> create mode 100644
>>>> Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml
>>>> create mode 100644
>>>> Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
>>>> create mode 100644
>>>> Documentation/devicetree/bindings/soc/mediatek/mediatek,ccorr.yam
>>>> l
>>>> create mode 100644
>>>> Documentation/devicetree/bindings/soc/mediatek/mediatek,wdma.yaml
>>>> create mode 100644 drivers/media/platform/mediatek/mdp3/Kconfig
>>>> create mode 100644
>>>> drivers/media/platform/mediatek/mdp3/Makefile
>>>> create mode 100644
>>>> drivers/media/platform/mediatek/mdp3/mdp_reg_ccorr.h
>>>> create mode 100644
>>>> drivers/media/platform/mediatek/mdp3/mdp_reg_rdma.h
>>>> create mode 100644
>>>> drivers/media/platform/mediatek/mdp3/mdp_reg_rsz.h
>>>> create mode 100644
>>>> drivers/media/platform/mediatek/mdp3/mdp_reg_wdma.h
>>>> create mode 100644
>>>> drivers/media/platform/mediatek/mdp3/mdp_reg_wrot.h
>>>> create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>> img-
>>>> ipi.h
>>>> create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>> mdp3-
>>>> cmdq.c
>>>> create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>> mdp3-
>>>> cmdq.h
>>>> create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>> mdp3-
>>>> comp.c
>>>> create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>> mdp3-
>>>> comp.h
>>>> create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>> mdp3-
>>>> core.c
>>>> create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>> mdp3-
>>>> core.h
>>>> create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>> mdp3-
>>>> m2m.c
>>>> create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>> mdp3-
>>>> m2m.h
>>>> create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>> mdp3-
>>>> regs.c
>>>> create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>> mdp3-
>>>> regs.h
>>>> create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>> mdp3-
>>>> vpu.c
>>>> create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
>>>> mdp3-
>>>> vpu.h
>>>>
>
More information about the linux-arm-kernel
mailing list