[PATCH v28 0/4] media: mediatek: support mdp3 on mt8183 platform
moudy ho
moudy.ho at mediatek.com
Wed Aug 24 19:41:13 PDT 2022
Hi Matthias,
As a friendly reminder, I found out that patches 1 and 2 are already on
the Hans's git, hopefully it won't cause you any trouble dealing with
this series
Regards,
Moudy
On Thu, 2022-08-25 at 10:06 +0800, moudy ho wrote:
> On Wed, 2022-08-24 at 13:32 +0200, Matthias Brugger wrote:
> > Patches 1, 2 and 3 now applied to v6.0-next/dts64
> >
> > Thanks!
> > Matthias
> >
>
> Hi Matthias,
>
> Thanks for your kind assistance.
>
> Respectfully,
> Moudy
>
> > On 23/08/2022 04:37, Moudy Ho wrote:
> > > Change since v27:
> > > - Rebase on v6.0-rc2
> > > - Delete duplicate config in MDP3 Kconfig
> > > - Relist maintainers in newly added bindings
> > > - Minor changes in mtk-mdp3-comp.c and mtk-mdp3-reg.c to
> > > avoid unnecessary long line warnings.
> > > - The v4l2-compliance test results are the same as v26.
> > >
> > > Change since v26:
> > > - Set MMSYS config from "depend on" to "select" in MDP3 Kconfig
> > > to avoid compilation errors of various combinations.
> > > - Fix cast to smaller integer type 'enum mdp_comp_type' from
> > > 'const void *' in mtk_mdp3_comp.c.
> > > - Fix sparse warnings in mtk_mdp3_comp.c.
> > > - The v4l2-compliance test results are the same as v26.
> > >
> > > Change since v25:
> > > - Add more COMPILE_TEST config in MDP3 Kconfig
> > > - Adjust unnecessary log level in "mdp_m2m_s_selection" function
> > > to
> > > avoid spamming the kernel log for userspace errors.
> > > - The v4l2-compliance test results list is as follows:
> > >
> > > v4l2-compliance 1.23.0-4942, 32 bits, 32-bit time_t
> > > v4l2-compliance SHA: 4cf258c24026 2022-07-28 15:43:45
> > >
> > > Compliance test for mtk-mdp3 device /dev/video0:
> > >
> > > Driver Info:
> > > Driver name : mtk-mdp3
> > > Card type : MediaTek MDP3
> > > Bus info : platform:14001000.mdp3-rdma0
> > > Driver version : 6.0.0
> > > Capabilities : 0x84204000
> > > Video Memory-to-Memory Multiplanar
> > > Streaming
> > > Extended Pix Format
> > > Device Capabilities
> > > Device Caps : 0x04204000
> > > Video Memory-to-Memory Multiplanar
> > > Streaming
> > > Extended Pix Format
> > > Required ioctls:
> > > test VIDIOC_QUERYCAP: OK
> > > test invalid ioctls: OK
> > > Allow for multiple opens:
> > > test second /dev/video0 open: OK
> > > test VIDIOC_QUERYCAP: OK
> > > test VIDIOC_G/S_PRIORITY: OK
> > > test for unlimited opens: OK
> > > Debug ioctls:
> > > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> > > test VIDIOC_LOG_STATUS: OK (Not Supported)
> > > Input ioctls:
> > > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not
> > > Supported)
> > > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> > > test VIDIOC_ENUMAUDIO: OK (Not Supported)
> > > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> > > test VIDIOC_G/S_AUDIO: OK (Not Supported)
> > > Inputs: 0 Audio Inputs: 0 Tuners: 0
> > > Output ioctls:
> > > test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> > > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > > test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> > > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> > > test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> > > Outputs: 0 Audio Outputs: 0 Modulators: 0
> > > Input/Output configuration ioctls:
> > > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> > > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not
> > > Supported)
> > > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> > > test VIDIOC_G/S_EDID: OK (Not Supported)
> > > Control ioctls:
> > > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> > > test VIDIOC_QUERYCTRL: OK
> > > test VIDIOC_G/S_CTRL: OK
> > > test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> > > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> > > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> > > Standard Controls: 4 Private Controls: 0
> > > Format ioctls:
> > > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> > > test VIDIOC_G/S_PARM: OK (Not Supported)
> > > test VIDIOC_G_FBUF: OK (Not Supported)
> > > test VIDIOC_G_FMT: OK
> > > test VIDIOC_TRY_FMT: OK
> > > test VIDIOC_S_FMT: OK
> > > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> > > test Cropping: OK
> > > test Composing: OK
> > > test Scaling: OK
> > > Codec ioctls:
> > > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> > > test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> > > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> > > Buffer ioctls:
> > > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> > > test VIDIOC_EXPBUF: OK
> > > test Requests: OK (Not Supported)
> > > test TIME32/64: OK
> > > Test input 0:
> > > Streaming ioctls:
> > > test read/write: OK (Not Supported)
> > > test blocking wait: OK
> > > <snip>
> > > test MMAP (no poll): OK
> > > <snip>
> > > test MMAP (select): OK
> > > <snip>
> > > test MMAP (epoll): OK
> > > test USERPTR (no poll): OK (Not Supported)
> > > test USERPTR (select): OK (Not Supported)
> > > test DMABUF: Cannot test, specify --expbuf-device
> > > Stream using all formats:
> > > <snip>
> > > Total for mtk-mdp3 device /dev/video0: 1592, Succeeded: 1592,
> > > Failed: 0, Warnings: 0
> > >
> > > Change since v24:
> > > - Rebase on v6.0-rc1.
> > >
> > > Change since v23:
> > > - Rebase on linux-next.
> > > - Fix compilation error.
> > >
> > > Change since v22:
> > > - Rebase on linux-next.
> > > - Fix typo about MDP3 in Kconfig.
> > > - Adjust some non-essential logs to lower levels.
> > >
> > > Change since v21:
> > > - Rebase on linux-next.
> > > - Following Hans suggestion, remove redundant kernel logs and
> > > revise a few non-functional code to make it clearer.
> > > - Remove API abuse to set plane size.
> > > - Added VPU send message failure error code for previous
> > > shortages.
> > >
> > > Change since v20:
> > > - Rebase on linux-next.
> > > - Move the MDP3 GCE events to the corresponding node and adjust
> > > the
> > > relevant driver settings.
> > >
> > > Change since v19:
> > > - Rebase on linux-next.
> > > - Export the function "mdp_cmdq_send" suggected by CK.
> > > - Fix "Macro argument reuse" reported by checkpatch.pl
> > >
> > > Change since v18:
> > > - Rebase on linux-next.
> > > - Adjust copyright date of MDP3 driver.
> > > - Functions renaming as follows:
> > > [1] is_output_disable() => is_output_disabled()
> > > [2] mdp_component_init() => mdp_comp_config()
> > > [3] mdp_component_deinit() => mdp_comp_destroy()
> > > [4] mdp_comp_ctx_init() => mdp_comp_ctx_config()
> > > [5] mdp_sub_comps_create() => mdp_comp_sub_create()
> > > - Document MDP3 10-bit format descriptions in "mtk-mdp3-regs.c".
> > > - Add error control for functions mdp_comp_clocks_on and
> > > mdp_comp_clock_on.
> > > - Moved function "mtk_mutex_put" from function
> > > "mdp_comp_destroy"(renamed from mdp_component_deinit) to avoid
> > > semantic ambiguity.
> > > - For some allocated parameters, assign a value of NULL after
> > > freeing
> > > to avoid the possibility of repeated use.
> > > - Removed unnecessary timestamp pass flow.
> > > - About parameters passed by the user in function
> > > "mdp_try_fmt_mplane", add relevant checks to
> > > clamp them in a reasonable range to avoid the possibility of
> > > overflow
> > >
> > > Change since v17:
> > > - Depend on:
> > > [1]
> > >
https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=649104__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8imRuenzc$
> > >
> > > - In response to future CMDQ api changes listed below:
> > >
> > >
https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/patch/20220608144055.27562-1-chunkuang.hu@kernel.org/__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8iul-Frc3$
> > >
> > > adjust CMDQ flush and callback flow in MDP3.
> > >
> > > Change since v16:
> > > - Rebased on v5.19-rc1
> > > - Depend on:
> > > [1]
> > >
https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=646131__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8ivEMBOlg$
> > >
> > > - In response to MUTEX changes, adjust API naming and parameters
> > > when
> > > used in function "mdp_path_subfrm_require".
> > > - Remove unnecessary MDP3 phandle in 8183 dts.
> > >
> > > Change since v15:
> > > - Depend on:
> > > [1]
> > >
https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=640926__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8ilOzZXlo$
> > >
> > > - Split the bindings under ./soc/mediatek into a separate patch.
> > > - Fix data abort in "mdp_auto_release_work"
> > > - Adjust the steps in the function "mdp_cmdq_send" to make the
> > > error handling
> > > more reasonable
> > >
> > > Change since v14:
> > > - Rebase on v5.18-rc6
> > > - Depend on:
> > > [1]
> > >
https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=640926__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8ilOzZXlo$
> > >
> > > - In response to CMDQ API change, replace the function
> > > "cmdq_pkt_flush_async"
> > > with the standard APIs of mbox
> > > - Fix the description of "mediatek,gce-client-reg" property in
> > > MDP3-related
> > > bindings
> > >
> > > Change since v13:
> > > - Rebase on v5.18-rc4
> > > - Depend on:
> > > [1]
> > >
https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=636041__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8itpp6cBE$
> > >
> > > - Remove advanced functionality about ISP settings for direct
> > > link
> > > cases.
> > > - Remove the software designation in the mt8183 dts and
> > > revise corresponding bindings.
> > >
> > > Change since v12:
> > > - Rebase on linux-next
> > > - Depend on:
> > > [1]
> > >
https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=630948__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8immtSFit$
> > >
> > > - Remove messages related to routing information in MDP3, and
> > > leave
> > > the related
> > > settings in MMSYS.
> > > - Remove unnecessary phandle and redundant property in RDMA dt-
> > > binding and
> > > adjust the corresponding driver.
> > > - Revise MDP3 node name in dts.
> > > - Removed unnecessary functions, mutex and work queue in MDP3
> > > driver
> > > - Fixed format mapping error for V4L2_PIX_FMT_RGB565X
> > >
> > > Change since v11:
> > > - Rebase on linux-next tag:next-20220316
> > > - Depend on:
> > > [1]
> > >
https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=624281__;!!CTRNKA9wMg0ARbw!xBeR0XT4y6ExQRq_RVLLvqrEAiaNTJcM01gt8yzzXtwM3F5J-zx8-TF8iu7IwX8m$
> > >
> > > - Remove redundant hardware index in data-binding suggested by
> > > Rob
> > > Herring.
> > > - Referring to Rob Herring's suggestion to improve some
> > > descriptions in the
> > > RDMA dt-binding
> > > - Move MDP3 file folder from "./drive/media/platform/mtk-mdp3" to
> > > "./driver/media/platform/mediatek/mdp3"
> > > - Fixed the V4L2 and MDP color format mapping error in RGB565
> > > which
> > > checked by Benjamin Gaignard
> > >
> > > Change since v10:
> > > - The routing table needs to be discarded, and the calculation
> > > result
> > > on the SCP side is used to write a suitable mux setting for
> > > 1 input port and 2 output ports.
> > > - Adjust dts parsing flow to remove redundant HW IDs.
> > > - Fix memory leak caused by no free path information in function
> > > "mdp_cmdq_send".
> > >
> > > Change since v9:
> > > - Keep only the MDP3 driver patches and split the remaining mmsys
> > > and
> > > mutex patches into another mail.
> > > - Move mutex mod settings to corresponding driver and make
> > > relevant
> > > adjustments
> > > for this in MDP3 driver.
> > > - Fix compile warning reported by kernel test robot.
> > >
> > > Change since v8:
> > > - Rebase on v5.16-rc2.
> > > - Refer to Angelo's suggestion, adjust the register writing
> > > format
> > > to increase
> > > readability and significance.
> > > - Refer to Angelo's suggestion, adjust or reduce inappropriate
> > > debugging
> > > messages.
> > > - Refer to Rob Herring's suggestion to correct the the binding
> > > file
> > > to make it with the specification.
> > > - Fix compile warning reported by kernel test robot.
> > >
> > > Change since v7:
> > > - Rebase on v5.15-rc6.
> > > - Revise several V4L2 M2M settings to pass v4l2-compliance test.
> > > - Integrate those same component dt-binding documents of DRM and
> > > MDP, and
> > > move them under the MMSYS domain.
> > > - Split MMSYS and MUTEX into two different files according to
> > > their functional properties.
> > >
> > > Changes since v6:
> > > - Refactor GCE event to corresponding node.
> > > - Fix dt_binding_check fail.
> > > - Fix compilation errors.
> > >
> > > Changes since v5:
> > > - Rebase on v5.14-rc6.
> > > - Move MMSYS/Mutex settings to corresponding driver.
> > > - Revise the software license description and copyright.
> > > - Remove unnecessary enum. or definitions.
> > > - Optimize platform/chip definition conditions.
> > > - Use general printing functions instead of MDP3 private ones.
> > > - Fix compile warning.
> > >
> > > Changes since v4:
> > > - Rebase on v5.13-rc1.
> > > - Remove the CMDQ flush flow to match the CMDQ API change.
> > > - Integrate four of MDP's direct-link subcomponents into MDP
> > > controller node
> > > from syscon node to avoid illegal clock usage.
> > > - Rewrite dt-binding in a JSON compatible subset of YAML
> > > - Fix a bit of macro argument precedence.
> > >
> > > Changes since v3:
> > > - Rebase on v5.9-rc1.
> > > - modify code for review comment from Rob Herring, cancel
> > > multiple
> > > nodes using
> > > same register base situation.
> > > - control IOMMU port through pm runtime get/put to DMA
> > > components'
> > > device.
> > > - SCP(VPU) driver revision.
> > > - stop queuing jobs(remove flush_workqueue()) after
> > > mdp_m2m_release().
> > > - add computation of plane address with data_offset.
> > > - fix scale ratio check issue.
> > > - add default v4l2_format setting.
> > >
> > > Changes since v2:
> > > - modify code for review comment from Tomasz Figa & Alexandre
> > > Courbot
> > > - review comment from Rob Herring will offer code revision in v4,
> > > due to
> > > it's related to device node modification, will need to modify
> > > code
> > > architecture
> > >
> > > Changes since v1:
> > > - modify code for CMDQ v3 API support
> > > - EC ipi cmd migration
> > > - fix compliance test fail item (m2m cmd with -f) due to there is
> > > two problem in
> > > runing all format(-f) cmd:
> > > 1. out of memory before test complete
> > > Due to capture buffer mmap (refcount + 1) after reqbuf
> > > but
> > > seems
> > > no corresponding munmap called before device close.
> > > There are total 12XX items(formats) in format test and
> > > each format
> > > alloc 8 capture/output buffers.
> > > 2. unceasingly captureBufs() (randomly)
> > > Seems the break statement didn't catch the count == 0
> > > situation:
> > > In v4l2-test-buffers.cpp, function: captureBufs()
> > > ...
> > > count--;
> > > if (!node->is_m2m && !count)
> > > break;
> > > Log is as attachment
> > >
> > > Hi,
> > >
> > > This patch is used to present Media Data Path 3 (MDP3)
> > > which provided scaling and color format conversion.
> > > support using GCE to write register in critical time limitation.
> > > support V4L2 m2m device control.
> > >
> > >
> > > Moudy Ho (4):
> > > dt-binding: mediatek: add bindings for MediaTek MDP3
> > > components
> > > dt-binding: mediatek: add bindings for MediaTek CCORR and WDMA
> > > arm64: dts: mt8183: add MediaTek MDP3 nodes
> > > media: platform: mtk-mdp3: add MediaTek MDP3 driver
> > >
> > > .../bindings/media/mediatek,mdp3-rdma.yaml | 95 ++
> > > .../bindings/media/mediatek,mdp3-rsz.yaml | 77 ++
> > > .../bindings/media/mediatek,mdp3-wrot.yaml | 80 ++
> > > .../bindings/soc/mediatek/mediatek,ccorr.yaml | 68 ++
> > > .../bindings/soc/mediatek/mediatek,wdma.yaml | 81 ++
> > > arch/arm64/boot/dts/mediatek/mt8183.dtsi | 63 +
> > > drivers/media/platform/mediatek/Kconfig | 1 +
> > > drivers/media/platform/mediatek/Makefile | 1 +
> > > drivers/media/platform/mediatek/mdp3/Kconfig | 20 +
> > > drivers/media/platform/mediatek/mdp3/Makefile | 6 +
> > > .../platform/mediatek/mdp3/mdp_reg_ccorr.h | 19 +
> > > .../platform/mediatek/mdp3/mdp_reg_rdma.h | 65 ++
> > > .../platform/mediatek/mdp3/mdp_reg_rsz.h | 39 +
> > > .../platform/mediatek/mdp3/mdp_reg_wdma.h | 47 +
> > > .../platform/mediatek/mdp3/mdp_reg_wrot.h | 55 +
> > > .../platform/mediatek/mdp3/mtk-img-ipi.h | 290 +++++
> > > .../platform/mediatek/mdp3/mtk-mdp3-cmdq.c | 466 ++++++++
> > > .../platform/mediatek/mdp3/mtk-mdp3-cmdq.h | 43 +
> > > .../platform/mediatek/mdp3/mtk-mdp3-comp.c | 1033
> > > +++++++++++++++++
> > > .../platform/mediatek/mdp3/mtk-mdp3-comp.h | 186 +++
> > > .../platform/mediatek/mdp3/mtk-mdp3-core.c | 357 ++++++
> > > .../platform/mediatek/mdp3/mtk-mdp3-core.h | 94 ++
> > > .../platform/mediatek/mdp3/mtk-mdp3-m2m.c | 724
> > > ++++++++++++
> > > .../platform/mediatek/mdp3/mtk-mdp3-m2m.h | 48 +
> > > .../platform/mediatek/mdp3/mtk-mdp3-regs.c | 735
> > > ++++++++++++
> > > .../platform/mediatek/mdp3/mtk-mdp3-regs.h | 373 ++++++
> > > .../platform/mediatek/mdp3/mtk-mdp3-vpu.c | 313 +++++
> > > .../platform/mediatek/mdp3/mtk-mdp3-vpu.h | 78 ++
> > > 28 files changed, 5457 insertions(+)
> > > create mode 100644
> > > Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
> > > create mode 100644
> > > Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml
> > > create mode 100644
> > > Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
> > > create mode 100644
> > > Documentation/devicetree/bindings/soc/mediatek/mediatek,ccorr.yam
> > > l
> > > create mode 100644
> > > Documentation/devicetree/bindings/soc/mediatek/mediatek,wdma.yaml
> > > create mode 100644 drivers/media/platform/mediatek/mdp3/Kconfig
> > > create mode 100644
> > > drivers/media/platform/mediatek/mdp3/Makefile
> > > create mode 100644
> > > drivers/media/platform/mediatek/mdp3/mdp_reg_ccorr.h
> > > create mode 100644
> > > drivers/media/platform/mediatek/mdp3/mdp_reg_rdma.h
> > > create mode 100644
> > > drivers/media/platform/mediatek/mdp3/mdp_reg_rsz.h
> > > create mode 100644
> > > drivers/media/platform/mediatek/mdp3/mdp_reg_wdma.h
> > > create mode 100644
> > > drivers/media/platform/mediatek/mdp3/mdp_reg_wrot.h
> > > create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
> > > img-
> > > ipi.h
> > > create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
> > > mdp3-
> > > cmdq.c
> > > create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
> > > mdp3-
> > > cmdq.h
> > > create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
> > > mdp3-
> > > comp.c
> > > create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
> > > mdp3-
> > > comp.h
> > > create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
> > > mdp3-
> > > core.c
> > > create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
> > > mdp3-
> > > core.h
> > > create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
> > > mdp3-
> > > m2m.c
> > > create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
> > > mdp3-
> > > m2m.h
> > > create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
> > > mdp3-
> > > regs.c
> > > create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
> > > mdp3-
> > > regs.h
> > > create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
> > > mdp3-
> > > vpu.c
> > > create mode 100644 drivers/media/platform/mediatek/mdp3/mtk-
> > > mdp3-
> > > vpu.h
> > >
More information about the linux-arm-kernel
mailing list