[PATCH 1/6] arm64: dts: imx8mp-venice-gw74xx: fix CAN STBY polarity

[Tim Harvey]

On Fri, Aug 12, 2022 at 10:51 AM Fabio Estevam <festevam at gmail.com> wrote:
>
> Hi Tim,
>
> On Fri, Aug 12, 2022 at 2:35 PM Tim Harvey <tharvey at gateworks.com> wrote:
>
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
> > index 521215520a0f..de17021df53f 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
> > @@ -123,8 +123,8 @@ reg_can2_stby: regulator-can2-stby {
> >                 pinctrl-names = "default";
> >                 pinctrl-0 = <&pinctrl_reg_can>;
> >                 regulator-name = "can2_stby";
> > -               gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
> > -               enable-active-high;
> > +               gpio = <&gpio3 19 GPIO_ACTIVE_LOW>;
> > +               enable-active-low;
>
> This 'enable-active-low' property does not exist. Just remove it.

Fabio,

Thanks - I see now that for active-low you just omit the
'enable-active-high' prop. I will send a new version.

Thanks,

Tim