[PATCH 1/6] arm64: dts: imx8mp-venice-gw74xx: fix CAN STBY polarity

[Fabio Estevam]

Hi Tim,

On Fri, Aug 12, 2022 at 2:35 PM Tim Harvey <tharvey at gateworks.com> wrote:

> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
> index 521215520a0f..de17021df53f 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
> @@ -123,8 +123,8 @@ reg_can2_stby: regulator-can2-stby {
>                 pinctrl-names = "default";
>                 pinctrl-0 = <&pinctrl_reg_can>;
>                 regulator-name = "can2_stby";
> -               gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
> -               enable-active-high;
> +               gpio = <&gpio3 19 GPIO_ACTIVE_LOW>;
> +               enable-active-low;

This 'enable-active-low' property does not exist. Just remove it.