[PATCH v3 3/3] memory: Add Broadcom STB memory controller driver

[Krzysztof Kozlowski]

On 02/08/2022 01:09, Florian Fainelli wrote:
> Add support for configuring the Self Refresh Power Down (SRPD)
> inactivity timeout on Broadcom STB chips. This is used to conserve power
> when the DRAM activity is reduced.
> 


> +static int __maybe_unused brcmstb_memc_resume(struct device *dev)
> +{
> +	struct brcmstb_memc *memc = dev_get_drvdata(dev);
> +
> +	if (memc->timeout_cycles == 0)
> +		return 0;
> +
> +	return brcmstb_memc_srpd_config(memc, memc->timeout_cycles);
> +}
> +
> +static SIMPLE_DEV_PM_OPS(brcmstb_memc_pm_ops, brcmstb_memc_suspend,
> +			 brcmstb_memc_resume);
> +
> +static struct platform_driver brcmstb_memc_driver = {
> +	.probe = brcmstb_memc_probe,
> +	.remove = brcmstb_memc_remove,
> +	.driver = {
> +		.name		= "brcmstb_memc",
> +		.owner		= THIS_MODULE,

No need, run coccinelle.

> +		.of_match_table	= brcmstb_memc_of_match,
> +		.pm		= &brcmstb_memc_pm_ops,

Shouldn't this be pm_ptr()? and then no need for __maybe_unused in
brcmstb_memc_resume/suspend.

> +	},
> +};
> +module_platform_driver(brcmstb_memc_driver);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Broadcom");
> +MODULE_DESCRIPTION("DDR SRPD driver for Broadcom STB chips");


Best regards,
Krzysztof