[PATCH net-next 4/5] net: dt-bindings: Introduce the Qualcomm IPQESS Ethernet controller

[Maxime Chevallier]

Hi Krzysztof

On Sat, 23 Apr 2022 19:49:30 +0200
Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org> wrote:

Thanks a lot for the review, I'll address all your comments in a V2.

> On 22/04/2022 20:03, Maxime Chevallier wrote:
> > Add the DT binding for the IPQESS Ethernet Controller. This is a
> > simple controller, only requiring the phy-mode, interrupts, clocks,
> > and possibly a MAC address setting.
> > 
> > Signed-off-by: Maxime Chevallier <maxime.chevallier at bootlin.com>
> > ---
> >  .../devicetree/bindings/net/qcom,ipqess.yaml  | 94
> > +++++++++++++++++++ 1 file changed, 94 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/net/qcom,ipqess.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/net/qcom,ipqess.yaml
> > b/Documentation/devicetree/bindings/net/qcom,ipqess.yaml new file
> > mode 100644 index 000000000000..8fec5633692f
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/net/qcom,ipqess.yaml
> > @@ -0,0 +1,94 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/net/qcom,ipqess.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Qualcomm IPQ ESS EDMA Ethernet Controller Device Tree
> > Bindings  
> 
> s/Device Tree Bindings//
> 
> > +
> > +allOf:
> > +  - $ref: "ethernet-controller.yaml#"  
> 
> allOf goes after maintainers.
> 
> > +
> > +maintainers:
> > +  - Maxime Chevallier <maxime.chevallier at bootlin.com>
> > +
> > +properties:
> > +  compatible:
> > +    const: qcom,ipq4019e-ess-edma
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    minItems: 2
> > +    maxItems: 32
> > +    description: One interrupt per tx and rx queue, with up to 16
> > queues. +
> > +  clocks:
> > +    maxItems: 1
> > +
> > +  phy-mode: true
> > +
> > +  fixed-link: true
> > +
> > +  mac-address: true  
> 
> You don't need all these three. They come from ethernet-controller and
> you use unevaluatedProperties.
> 
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - clocks
> > +  - phy-mode
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    gmac: ethernet at c080000 {
> > +        compatible = "qcom,ipq4019-ess-edma";
> > +        reg = <0xc080000 0x8000>;
> > +        interrupts = <GIC_SPI  65 IRQ_TYPE_EDGE_RISING>,
> > +                     <GIC_SPI  66 IRQ_TYPE_EDGE_RISING>,
> > +                     <GIC_SPI  67 IRQ_TYPE_EDGE_RISING>,
> > +                     <GIC_SPI  68 IRQ_TYPE_EDGE_RISING>,
> > +                     <GIC_SPI  69 IRQ_TYPE_EDGE_RISING>,
> > +                     <GIC_SPI  70 IRQ_TYPE_EDGE_RISING>,
> > +                     <GIC_SPI  71 IRQ_TYPE_EDGE_RISING>,
> > +                     <GIC_SPI  72 IRQ_TYPE_EDGE_RISING>,
> > +                     <GIC_SPI  73 IRQ_TYPE_EDGE_RISING>,
> > +                     <GIC_SPI  74 IRQ_TYPE_EDGE_RISING>,
> > +                     <GIC_SPI  75 IRQ_TYPE_EDGE_RISING>,
> > +                     <GIC_SPI  76 IRQ_TYPE_EDGE_RISING>,
> > +                     <GIC_SPI  77 IRQ_TYPE_EDGE_RISING>,
> > +                     <GIC_SPI  78 IRQ_TYPE_EDGE_RISING>,
> > +                     <GIC_SPI  79 IRQ_TYPE_EDGE_RISING>,
> > +                     <GIC_SPI  80 IRQ_TYPE_EDGE_RISING>,
> > +                     <GIC_SPI 240 IRQ_TYPE_EDGE_RISING>,
> > +                     <GIC_SPI 241 IRQ_TYPE_EDGE_RISING>,
> > +                     <GIC_SPI 242 IRQ_TYPE_EDGE_RISING>,
> > +                     <GIC_SPI 243 IRQ_TYPE_EDGE_RISING>,
> > +                     <GIC_SPI 244 IRQ_TYPE_EDGE_RISING>,
> > +                     <GIC_SPI 245 IRQ_TYPE_EDGE_RISING>,
> > +                     <GIC_SPI 246 IRQ_TYPE_EDGE_RISING>,
> > +                     <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>,
> > +                     <GIC_SPI 248 IRQ_TYPE_EDGE_RISING>,
> > +                     <GIC_SPI 249 IRQ_TYPE_EDGE_RISING>,
> > +                     <GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
> > +                     <GIC_SPI 251 IRQ_TYPE_EDGE_RISING>,
> > +                     <GIC_SPI 252 IRQ_TYPE_EDGE_RISING>,
> > +                     <GIC_SPI 253 IRQ_TYPE_EDGE_RISING>,
> > +                     <GIC_SPI 254 IRQ_TYPE_EDGE_RISING>,
> > +                     <GIC_SPI 255 IRQ_TYPE_EDGE_RISING>;
> > +
> > +        status = "okay";  
> 
> No status in the example.
> 
> > +
> > +        phy-mode = "internal";
> > +        fixed-link {
> > +            speed = <1000>;
> > +            full-duplex;
> > +            pause;
> > +            asym-pause;
> > +        };
> > +    };
> > +
> > +...  
> 
> 
> Best regards,
> Krzysztof

Best Regards,

Maxime