[PATCH net-next 4/5] net: dt-bindings: Introduce the Qualcomm IPQESS Ethernet controller

[Krzysztof Kozlowski]

On 22/04/2022 20:03, Maxime Chevallier wrote:
> Add the DT binding for the IPQESS Ethernet Controller. This is a simple
> controller, only requiring the phy-mode, interrupts, clocks, and
> possibly a MAC address setting.
> 
> Signed-off-by: Maxime Chevallier <maxime.chevallier at bootlin.com>
> ---
>  .../devicetree/bindings/net/qcom,ipqess.yaml  | 94 +++++++++++++++++++
>  1 file changed, 94 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/qcom,ipqess.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/qcom,ipqess.yaml b/Documentation/devicetree/bindings/net/qcom,ipqess.yaml
> new file mode 100644
> index 000000000000..8fec5633692f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/qcom,ipqess.yaml
> @@ -0,0 +1,94 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/qcom,ipqess.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm IPQ ESS EDMA Ethernet Controller Device Tree Bindings

s/Device Tree Bindings//

> +
> +allOf:
> +  - $ref: "ethernet-controller.yaml#"

allOf goes after maintainers.

> +
> +maintainers:
> +  - Maxime Chevallier <maxime.chevallier at bootlin.com>
> +
> +properties:
> +  compatible:
> +    const: qcom,ipq4019e-ess-edma
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    minItems: 2
> +    maxItems: 32
> +    description: One interrupt per tx and rx queue, with up to 16 queues.
> +
> +  clocks:
> +    maxItems: 1
> +
> +  phy-mode: true
> +
> +  fixed-link: true
> +
> +  mac-address: true

You don't need all these three. They come from ethernet-controller and
you use unevaluatedProperties.

> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - phy-mode
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    gmac: ethernet at c080000 {
> +        compatible = "qcom,ipq4019-ess-edma";
> +        reg = <0xc080000 0x8000>;
> +        interrupts = <GIC_SPI  65 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI  66 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI  67 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI  68 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI  69 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI  70 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI  71 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI  72 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI  73 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI  74 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI  75 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI  76 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI  77 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI  78 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI  79 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI  80 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 240 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 241 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 242 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 243 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 244 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 245 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 246 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 248 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 249 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 251 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 252 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 253 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 254 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 255 IRQ_TYPE_EDGE_RISING>;
> +
> +        status = "okay";

No status in the example.

> +
> +        phy-mode = "internal";
> +        fixed-link {
> +            speed = <1000>;
> +            full-duplex;
> +            pause;
> +            asym-pause;
> +        };
> +    };
> +
> +...


Best regards,
Krzysztof