[PATCH v6 3/3] arm64: dts: mediatek: add basic mt7986b support
Sam Shih
sam.shih at mediatek.com
Thu Oct 14 18:41:37 PDT 2021
Hi
On Thu, 2021-10-14 at 17:32 +0200, Matthias Brugger wrote:
>
> On 14/10/2021 09:44, Sam Shih wrote:
> > Add basic chip support for Mediatek mt7986b, include
> > basic uart nodes, rng node and watchdog node.
> >
> > Add cpu node, timer node, gic node, psci and reserved-memory node
> > for ARM Trusted Firmware.
> >
> > Signed-off-by: Sam Shih <sam.shih at mediatek.com>
> >
> > ---
> > v6: separate basic part into a single patch series
> > v5: follow reviewr's comment: removed clock freqency node in timer
> > due to
> > we have set CNTFRQ_EL0 in ATF firmware, and also corrected
> > GICD range
> > v4: added missing gic register bases, and fixed range of GICR
> > v3: used the stdout-path instead of console=ttyS0
> > v2: modified clock and uart node due to clock driver updated
> > ---
> > arch/arm64/boot/dts/mediatek/Makefile | 1 +
> > arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 26 ++++
> > arch/arm64/boot/dts/mediatek/mt7986b.dtsi | 149
> > +++++++++++++++++++
> > 3 files changed, 176 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> > create mode 100644 arch/arm64/boot/dts/mediatek/mt7986b.dtsi
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/Makefile
> > b/arch/arm64/boot/dts/mediatek/Makefile
> > index e6c3a73b9e4a..d555e43d1ccc 100644
> > --- a/arch/arm64/boot/dts/mediatek/Makefile
> > +++ b/arch/arm64/boot/dts/mediatek/Makefile
> > @@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
> > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
> > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
> > dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
> > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986b-rfb.dtb
> > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb
> > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb
> > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
> > diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> > b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> > new file mode 100644
> > index 000000000000..95a202505bb2
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> > @@ -0,0 +1,26 @@
> > +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> > +/*
> > + * Copyright (C) 2021 MediaTek Inc.
> > + * Author: Sam.Shih <sam.shih at mediatek.com>
> > + */
> > +
> > +/dts-v1/;
> > +#include "mt7986b.dtsi"
> > +
> > +/ {
> > + model = "MediaTek MT7986b RFB";
> > + compatible = "mediatek,mt7986b-rfb";
> > +
> > + aliases {
> > + serial0 = &uart0;
> > + };
> > +
> > + chosen {
> > + stdout-path = "serial0:115200n8";
> > + bootargs = "earlycon=uart8250,mmio32,0x11002000
> > swiotlb=512";
> > + };
> > +};
> > +
> > +&uart0 {
> > + status = "okay";
> > +};
>
> We are missing a memory node here. I wonder how the board was able to
> boot
> without memory. Did you test this series?
>
Yes, I have tested this patch series in my local environment,
Our u-boot seems to pass the memory configuration to the kernel
according to its memory detection mechanism, so it was able to boot.
But for the kernel upstream, do you think it is better to
add the memory node back to the kernel dts?
If yes, I will send the next patch to add the mermory node back to the
kernel dts.
> Regards,
> Matthias
>
> > diff --git a/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
> > b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
> > new file mode 100644
> > index 000000000000..2b8e0a382398
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
> > @@ -0,0 +1,149 @@
> > +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> > +/*
> > + * Copyright (C) 2021 MediaTek Inc.
> > + * Author: Sam.Shih <sam.shih at mediatek.com>
> > + */
> > +
> > +#include <dt-bindings/interrupt-controller/irq.h>
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > +/ {
> > + compatible = "mediatek,mt7986b";
> > + interrupt-parent = <&gic>;
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > +
> > + system_clk: dummy40m {
> > + compatible = "fixed-clock";
> > + clock-frequency = <40000000>;
> > + #clock-cells = <0>;
> > + };
> > +
> > + cpus {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + cpu0: cpu at 0 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a53";
> > + enable-method = "psci";
> > + reg = <0x0>;
> > + #cooling-cells = <2>;
> > + };
> > +
> > + cpu1: cpu at 1 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a53";
> > + enable-method = "psci";
> > + reg = <0x1>;
> > + #cooling-cells = <2>;
> > + };
> > +
> > + cpu2: cpu at 2 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a53";
> > + enable-method = "psci";
> > + reg = <0x2>;
> > + #cooling-cells = <2>;
> > + };
> > +
> > + cpu3: cpu at 3 {
> > + device_type = "cpu";
> > + enable-method = "psci";
> > + compatible = "arm,cortex-a53";
> > + reg = <0x3>;
> > + #cooling-cells = <2>;
> > + };
> > + };
> > +
> > + psci {
> > + compatible = "arm,psci-0.2";
> > + method = "smc";
> > + };
> > +
> > + reserved-memory {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + ranges;
> > + /* 192 KiB reserved for ARM Trusted Firmware (BL31) */
> > + secmon_reserved: secmon at 43000000 {
> > + reg = <0 0x43000000 0 0x30000>;
> > + no-map;
> > + };
> > + };
> > +
> > + timer {
> > + compatible = "arm,armv8-timer";
> > + interrupt-parent = <&gic>;
> > + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
> > + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
> > + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
> > + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
> > + };
> > +
> > + soc {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + compatible = "simple-bus";
> > + ranges;
> > +
> > + gic: interrupt-controller at c000000 {
> > + compatible = "arm,gic-v3";
> > + #interrupt-cells = <3>;
> > + interrupt-parent = <&gic>;
> > + interrupt-controller;
> > + reg = <0 0x0c000000 0 0x10000>, /* GICD */
> > + <0 0x0c080000 0 0x80000>, /* GICR */
> > + <0 0x0c400000 0 0x2000>, /* GICC */
> > + <0 0x0c410000 0 0x1000>, /* GICH */
> > + <0 0x0c420000 0 0x2000>; /* GICV */
> > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> > + };
> > +
> > + watchdog: watchdog at 1001c000 {
> > + compatible = "mediatek,mt7986-wdt",
> > + "mediatek,mt6589-wdt";
> > + reg = <0 0x1001c000 0 0x1000>;
> > + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
> > + #reset-cells = <1>;
> > + status = "disabled";
> > + };
> > +
> > + trng: trng at 1020f000 {
> > + compatible = "mediatek,mt7986-rng",
> > + "mediatek,mt7623-rng";
> > + reg = <0 0x1020f000 0 0x100>;
> > + clocks = <&system_clk>;
> > + clock-names = "rng";
> > + status = "disabled";
> > + };
> > +
> > + uart0: serial at 11002000 {
> > + compatible = "mediatek,mt7986-uart",
> > + "mediatek,mt6577-uart";
> > + reg = <0 0x11002000 0 0x400>;
> > + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&system_clk>;
> > + status = "disabled";
> > + };
> > +
> > + uart1: serial at 11003000 {
> > + compatible = "mediatek,mt7986-uart",
> > + "mediatek,mt6577-uart";
> > + reg = <0 0x11003000 0 0x400>;
> > + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&system_clk>;
> > + status = "disabled";
> > + };
> > +
> > + uart2: serial at 11004000 {
> > + compatible = "mediatek,mt7986-uart",
> > + "mediatek,mt6577-uart";
> > + reg = <0 0x11004000 0 0x400>;
> > + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&system_clk>;
> > + status = "disabled";
> > + };
> > +
> > + };
> > +
> > +};
Thanks,
Sam
More information about the linux-arm-kernel
mailing list