[PATCH v6 3/3] arm64: dts: mediatek: add basic mt7986b support
Matthias Brugger
matthias.bgg at gmail.com
Thu Oct 14 08:32:34 PDT 2021
On 14/10/2021 09:44, Sam Shih wrote:
> Add basic chip support for Mediatek mt7986b, include
> basic uart nodes, rng node and watchdog node.
>
> Add cpu node, timer node, gic node, psci and reserved-memory node
> for ARM Trusted Firmware.
>
> Signed-off-by: Sam Shih <sam.shih at mediatek.com>
>
> ---
> v6: separate basic part into a single patch series
> v5: follow reviewr's comment: removed clock freqency node in timer due to
> we have set CNTFRQ_EL0 in ATF firmware, and also corrected GICD range
> v4: added missing gic register bases, and fixed range of GICR
> v3: used the stdout-path instead of console=ttyS0
> v2: modified clock and uart node due to clock driver updated
> ---
> arch/arm64/boot/dts/mediatek/Makefile | 1 +
> arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 26 ++++
> arch/arm64/boot/dts/mediatek/mt7986b.dtsi | 149 +++++++++++++++++++
> 3 files changed, 176 insertions(+)
> create mode 100644 arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> create mode 100644 arch/arm64/boot/dts/mediatek/mt7986b.dtsi
>
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> index e6c3a73b9e4a..d555e43d1ccc 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986b-rfb.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
> diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> new file mode 100644
> index 000000000000..95a202505bb2
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> @@ -0,0 +1,26 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright (C) 2021 MediaTek Inc.
> + * Author: Sam.Shih <sam.shih at mediatek.com>
> + */
> +
> +/dts-v1/;
> +#include "mt7986b.dtsi"
> +
> +/ {
> + model = "MediaTek MT7986b RFB";
> + compatible = "mediatek,mt7986b-rfb";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512";
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
We are missing a memory node here. I wonder how the board was able to boot
without memory. Did you test this series?
Regards,
Matthias
> diff --git a/arch/arm64/boot/dts/mediatek/mt7986b.dtsi b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
> new file mode 100644
> index 000000000000..2b8e0a382398
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
> @@ -0,0 +1,149 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright (C) 2021 MediaTek Inc.
> + * Author: Sam.Shih <sam.shih at mediatek.com>
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> + compatible = "mediatek,mt7986b";
> + interrupt-parent = <&gic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + system_clk: dummy40m {
> + compatible = "fixed-clock";
> + clock-frequency = <40000000>;
> + #clock-cells = <0>;
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + cpu0: cpu at 0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + enable-method = "psci";
> + reg = <0x0>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu1: cpu at 1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + enable-method = "psci";
> + reg = <0x1>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu2: cpu at 2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + enable-method = "psci";
> + reg = <0x2>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu3: cpu at 3 {
> + device_type = "cpu";
> + enable-method = "psci";
> + compatible = "arm,cortex-a53";
> + reg = <0x3>;
> + #cooling-cells = <2>;
> + };
> + };
> +
> + psci {
> + compatible = "arm,psci-0.2";
> + method = "smc";
> + };
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + /* 192 KiB reserved for ARM Trusted Firmware (BL31) */
> + secmon_reserved: secmon at 43000000 {
> + reg = <0 0x43000000 0 0x30000>;
> + no-map;
> + };
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
> + };
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + compatible = "simple-bus";
> + ranges;
> +
> + gic: interrupt-controller at c000000 {
> + compatible = "arm,gic-v3";
> + #interrupt-cells = <3>;
> + interrupt-parent = <&gic>;
> + interrupt-controller;
> + reg = <0 0x0c000000 0 0x10000>, /* GICD */
> + <0 0x0c080000 0 0x80000>, /* GICR */
> + <0 0x0c400000 0 0x2000>, /* GICC */
> + <0 0x0c410000 0 0x1000>, /* GICH */
> + <0 0x0c420000 0 0x2000>; /* GICV */
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + watchdog: watchdog at 1001c000 {
> + compatible = "mediatek,mt7986-wdt",
> + "mediatek,mt6589-wdt";
> + reg = <0 0x1001c000 0 0x1000>;
> + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
> + #reset-cells = <1>;
> + status = "disabled";
> + };
> +
> + trng: trng at 1020f000 {
> + compatible = "mediatek,mt7986-rng",
> + "mediatek,mt7623-rng";
> + reg = <0 0x1020f000 0 0x100>;
> + clocks = <&system_clk>;
> + clock-names = "rng";
> + status = "disabled";
> + };
> +
> + uart0: serial at 11002000 {
> + compatible = "mediatek,mt7986-uart",
> + "mediatek,mt6577-uart";
> + reg = <0 0x11002000 0 0x400>;
> + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&system_clk>;
> + status = "disabled";
> + };
> +
> + uart1: serial at 11003000 {
> + compatible = "mediatek,mt7986-uart",
> + "mediatek,mt6577-uart";
> + reg = <0 0x11003000 0 0x400>;
> + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&system_clk>;
> + status = "disabled";
> + };
> +
> + uart2: serial at 11004000 {
> + compatible = "mediatek,mt7986-uart",
> + "mediatek,mt6577-uart";
> + reg = <0 0x11004000 0 0x400>;
> + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&system_clk>;
> + status = "disabled";
> + };
> +
> + };
> +
> +};
>
More information about the linux-arm-kernel
mailing list