[PATCH 3/3] arm64: dts: imx8mq: add support for MNT Reform2

[Rob Herring]

On Sat, May 08, 2021 at 02:16:50PM +0200, Lucas Stach wrote:
> This adds a basic devicetree for the MNT Reform2 DIY laptop. Not all
> of the board periperals are enabled yet, as some of them still require
> kernel patches to work properly. The nodes for those peripherals will
> be added as soon as the required patches are upstream.
> 
> The following has been tested to work:
> - UART console
> - SD card
> - eMMC
> - Gigabit Ethernet
> - USB (internal Keyboard, Mouse, external ports)
> - M.2 PCIe port
> 
> Co-developed-by: Lukas F. Hartmann <lukas at mntre.com>
> Signed-off-by: Lucas Stach <dev at lynxeye.de>
> ---
>  .../devicetree/bindings/arm/fsl.yaml          |   1 +
>  arch/arm64/boot/dts/freescale/Makefile        |   1 +
>  .../boot/dts/freescale/imx8mq-mnt-reform2.dts | 164 ++++++++++++++++++
>  3 files changed, 166 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts

checkpatch complains about some indentation.