[PATCH 1/3] arm64: dts: imx8mq: add Nitrogen8 SoM

[Fabio Estevam]

Hi Lucas,

On Sat, May 8, 2021 at 9:17 AM Lucas Stach <dev at lynxeye.de> wrote:

> +       pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
> +               fsl,pins = <
> +                       MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK                 0x8d
> +                       MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD                 0xcd
> +                       MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0             0xcd
> +                       MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1             0xcd
> +                       MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2             0xcd
> +                       MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3             0xcd
> +                       MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4             0xcd
> +                       MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5             0xcd
> +                       MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6             0xcd
> +                       MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7             0xcd
> +               >;
> +       };
> +
> +       pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
> +               fsl,pins = <
> +                       MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK                 0x9f
> +                       MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD                 0xdf
> +                       MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0             0xdf
> +                       MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1             0xdf
> +                       MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2             0xdf
> +                       MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3             0xdf
> +                       MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4             0xdf
> +                       MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5             0xdf
> +                       MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6             0xdf
> +                       MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7             0xdf

The 100 and 200MHz pinctrl entries are unused here, so you could just
remove them.