[boot-wrapper PATCH 1/5] Decouple V2M_SYS config by auto-detect dtb node

[Jaxson Han]

Hi Andre,

> -----Original Message-----
> From: Andre Przywara <andre.przywara at arm.com>
> Sent: Monday, May 10, 2021 4:31 PM
> To: Jaxson Han <Jaxson.Han at arm.com>
> Cc: Mark Rutland <Mark.Rutland at arm.com>; linux-arm-
> kernel at lists.infradead.org; Wei Chen <Wei.Chen at arm.com>
> Subject: Re: [boot-wrapper PATCH 1/5] Decouple V2M_SYS config by auto-
> detect dtb node
> 
> On Wed, 28 Apr 2021 03:23:18 +0000
> Jaxson Han <Jaxson.Han at arm.com> wrote:
> 
> Hi Jaxson,
> 
> > Hi Andre,
> >
> > > -----Original Message-----
> > > From: Andre Przywara <andre.przywara at arm.com>
> > > Sent: Monday, April 26, 2021 7:30 PM
> > > To: Jaxson Han <Jaxson.Han at arm.com>
> > > Cc: Mark Rutland <Mark.Rutland at arm.com>; linux-arm-
> > > kernel at lists.infradead.org; Wei Chen <Wei.Chen at arm.com>
> > > Subject: Re: [boot-wrapper PATCH 1/5] Decouple V2M_SYS config by
> > > auto- detect dtb node
> > >
> > > On Tue, 20 Apr 2021 15:24:34 +0800
> > > Jaxson Han <jaxson.han at arm.com> wrote:
> > >
> > > Hi,
> > >
> > > > An auto-detect switch is added to make it an option to
> > > > enable/disable 'arm,vexpress-sysreg', because not all platforms support
> this feature.
> > >
> > > The change itself is fine, only has the side effect of now printing
> > > an message about the missing node:
> > > No matching devices found at ./findbase.pl line 37.
> > >
> > > I will have a look if we can avoid this, or we drop this message in
> > > findbase.pl at all.
> >
> > Thanks, if you have any suggestions, please let me know:)
> 
> As Mark suggested, you can just add " 2> /dev/null" at the end of the
> findbase.pl call. That allows to do this warning suppression on a case-by-case
> base, and is preferred over dropping this message in general.

Got it, thanks for the information :)

Cheers,
Jaxson

> 
> Cheers,
> Andre
> 
> >
> > >
> > > But for the sake of this patch:
> > >
> > > Reviewed-by: Andre Przywara <andre.przywara at arm.com>
> > >
> > > Cheers,
> > > Andre
> >
> > Thanks!
> > Jaxson
> >
> > >
> > > > Signed-off-by: Jaxson Han <jaxson.han at arm.com>
> > > > ---
> > > >  Makefile.am | 2 +-
> > > >  platform.c  | 4 ++++
> > > >  2 files changed, 5 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/Makefile.am b/Makefile.am index af694b7..e131207
> > > > 100644
> > > > --- a/Makefile.am
> > > > +++ b/Makefile.am
> > > > @@ -19,7 +19,7 @@ NR_CPUS         := $(shell echo $(CPU_IDS) | tr ',' ' ' |
> wc
> > > -w)
> > > >  DEFINES		= -DCNTFRQ=$(CNTFRQ)
> > > >  DEFINES		+= -DCPU_IDS=$(CPU_IDS)
> > > >  DEFINES		+= -DNR_CPUS=$(NR_CPUS)
> > > > -DEFINES		+= -DSYSREGS_BASE=$(SYSREGS_BASE)
> > > > +DEFINES		+= $(if $(SYSREGS_BASE), -
> > > DSYSREGS_BASE=$(SYSREGS_BASE), )
> > > >  DEFINES		+= -DUART_BASE=$(UART_BASE)
> > > >  DEFINES		+= -DSTACK_SIZE=256
> > > >
> > > > diff --git a/platform.c b/platform.c index a528a55..d11f568 100644
> > > > --- a/platform.c
> > > > +++ b/platform.c
> > > > @@ -23,10 +23,12 @@
> > > >
> > > >  #define PL011(reg)	((void *)UART_BASE + PL011_##reg)
> > > >
> > > > +#ifdef SYSREGS_BASE
> > > >  #define V2M_SYS_CFGDATA		0xa0
> > > >  #define V2M_SYS_CFGCTRL		0xa4
> > > >
> > > >  #define V2M_SYS(reg)	((void *)SYSREGS_BASE + V2M_SYS_##reg)
> > > > +#endif
> > > >
> > > >  static void print_string(const char *str)  { @@ -59,6 +61,7 @@
> > > > void
> > > > init_platform(void)
> > > >
> > > >  	print_string("Boot-wrapper v0.2\r\n\r\n");
> > > >
> > > > +#ifdef SYSREGS_BASE
> > > >  	/*
> > > >  	 * CLCD output site MB
> > > >  	 */
> > > > @@ -66,4 +69,5 @@ void init_platform(void)
> > > >  	/* START | WRITE | MUXFPGA | SITE_MB */
> > > >  	raw_writel((1 << 31) | (1 << 30) | (7 << 20) | (0 << 16),
> > > >  				V2M_SYS(CFGCTRL));
> > > > +#endif
> > > >  }
> >