[boot-wrapper PATCH 1/5] Decouple V2M_SYS config by auto-detect dtb node

[Andre Przywara]

On Wed, 28 Apr 2021 03:23:18 +0000
Jaxson Han <Jaxson.Han at arm.com> wrote:

Hi Jaxson,

> Hi Andre,
> 
> > -----Original Message-----
> > From: Andre Przywara <andre.przywara at arm.com>
> > Sent: Monday, April 26, 2021 7:30 PM
> > To: Jaxson Han <Jaxson.Han at arm.com>
> > Cc: Mark Rutland <Mark.Rutland at arm.com>; linux-arm-
> > kernel at lists.infradead.org; Wei Chen <Wei.Chen at arm.com>
> > Subject: Re: [boot-wrapper PATCH 1/5] Decouple V2M_SYS config by auto-
> > detect dtb node
> > 
> > On Tue, 20 Apr 2021 15:24:34 +0800
> > Jaxson Han <jaxson.han at arm.com> wrote:
> > 
> > Hi,
> >   
> > > An auto-detect switch is added to make it an option to enable/disable
> > > 'arm,vexpress-sysreg', because not all platforms support this feature.  
> > 
> > The change itself is fine, only has the side effect of now printing an message
> > about the missing node:
> > No matching devices found at ./findbase.pl line 37.
> > 
> > I will have a look if we can avoid this, or we drop this message in findbase.pl
> > at all.  
> 
> Thanks, if you have any suggestions, please let me know:)

As Mark suggested, you can just add " 2> /dev/null" at the end of the
findbase.pl call. That allows to do this warning suppression on a
case-by-case base, and is preferred over dropping this message in
general.

Cheers,
Andre

> 
> > 
> > But for the sake of this patch:
> > 
> > Reviewed-by: Andre Przywara <andre.przywara at arm.com>
> > 
> > Cheers,
> > Andre  
> 
> Thanks!
> Jaxson
> 
> >   
> > > Signed-off-by: Jaxson Han <jaxson.han at arm.com>
> > > ---
> > >  Makefile.am | 2 +-
> > >  platform.c  | 4 ++++
> > >  2 files changed, 5 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/Makefile.am b/Makefile.am index af694b7..e131207 100644
> > > --- a/Makefile.am
> > > +++ b/Makefile.am
> > > @@ -19,7 +19,7 @@ NR_CPUS         := $(shell echo $(CPU_IDS) | tr ',' ' ' | wc  
> > -w)  
> > >  DEFINES		= -DCNTFRQ=$(CNTFRQ)
> > >  DEFINES		+= -DCPU_IDS=$(CPU_IDS)
> > >  DEFINES		+= -DNR_CPUS=$(NR_CPUS)
> > > -DEFINES		+= -DSYSREGS_BASE=$(SYSREGS_BASE)
> > > +DEFINES		+= $(if $(SYSREGS_BASE), -  
> > DSYSREGS_BASE=$(SYSREGS_BASE), )  
> > >  DEFINES		+= -DUART_BASE=$(UART_BASE)
> > >  DEFINES		+= -DSTACK_SIZE=256
> > >
> > > diff --git a/platform.c b/platform.c
> > > index a528a55..d11f568 100644
> > > --- a/platform.c
> > > +++ b/platform.c
> > > @@ -23,10 +23,12 @@
> > >
> > >  #define PL011(reg)	((void *)UART_BASE + PL011_##reg)
> > >
> > > +#ifdef SYSREGS_BASE
> > >  #define V2M_SYS_CFGDATA		0xa0
> > >  #define V2M_SYS_CFGCTRL		0xa4
> > >
> > >  #define V2M_SYS(reg)	((void *)SYSREGS_BASE + V2M_SYS_##reg)
> > > +#endif
> > >
> > >  static void print_string(const char *str)  { @@ -59,6 +61,7 @@ void
> > > init_platform(void)
> > >
> > >  	print_string("Boot-wrapper v0.2\r\n\r\n");
> > >
> > > +#ifdef SYSREGS_BASE
> > >  	/*
> > >  	 * CLCD output site MB
> > >  	 */
> > > @@ -66,4 +69,5 @@ void init_platform(void)
> > >  	/* START | WRITE | MUXFPGA | SITE_MB */
> > >  	raw_writel((1 << 31) | (1 << 30) | (7 << 20) | (0 << 16),
> > >  				V2M_SYS(CFGCTRL));
> > > +#endif
> > >  }  
>