[PATCH v7 07/14] dt-bindings: mfd: Add i.MX8qm/qxp Control and Status Registers module binding

[Rob Herring]

On Wed, 31 Mar 2021 14:33:18 +0800, Liu Ying wrote:
> This patch adds bindings for i.MX8qm/qxp Control and Status Registers module.
> 
> Reviewed-by: Rob Herring <robh at kernel.org>
> Signed-off-by: Liu Ying <victor.liu at nxp.com>
> ---
> v6->v7:
> * Add Rob's R-b tag.
> 
> v5->v6:
> * Drop 'select' schema. (Rob)
> 
> v4->v5:
> * Newly introduced in v5. (Rob)
> 
>  .../devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml   | 192 +++++++++++++++++++++
>  1 file changed, 192 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.example.dt.yaml:0:0: /example-0/syscon at 56221000/pxl2dpi: failed to match any schema with compatible: ['fsl,imx8qxp-pxl2dpi']
Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.example.dt.yaml:0:0: /example-0/syscon at 56221000/ldb: failed to match any schema with compatible: ['fsl,imx8qxp-ldb']
Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.example.dt.yaml:0:0: /example-0/phy at 56228300: failed to match any schema with compatible: ['fsl,imx8qxp-mipi-dphy']

See https://patchwork.ozlabs.org/patch/1460356

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.