[PATCH v7 07/14] dt-bindings: mfd: Add i.MX8qm/qxp Control and Status Registers module binding
Liu Ying
victor.liu at nxp.com
Wed Mar 31 07:33:18 BST 2021
This patch adds bindings for i.MX8qm/qxp Control and Status Registers module.
Reviewed-by: Rob Herring <robh at kernel.org>
Signed-off-by: Liu Ying <victor.liu at nxp.com>
---
v6->v7:
* Add Rob's R-b tag.
v5->v6:
* Drop 'select' schema. (Rob)
v4->v5:
* Newly introduced in v5. (Rob)
.../devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml | 192 +++++++++++++++++++++
1 file changed, 192 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml
diff --git a/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml b/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml
new file mode 100644
index 00000000..f095771
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/fsl,imx8qxp-csr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qm/qxp Control and Status Registers Module Bindings
+
+maintainers:
+ - Liu Ying <victor.liu at nxp.com>
+
+description: |
+ As a system controller, the Freescale i.MX8qm/qxp Control and Status
+ Registers(CSR) module represents a set of miscellaneous registers of a
+ specific subsystem. It may provide control and/or status report interfaces
+ to a mix of standalone hardware devices within that subsystem. One typical
+ use-case is for some other nodes to acquire a reference to the syscon node
+ by phandle, and the other typical use-case is that the operating system
+ should consider all subnodes of the CSR module as separate child devices.
+
+properties:
+ $nodename:
+ pattern: "^syscon@[0-9a-f]+$"
+
+ compatible:
+ items:
+ - enum:
+ - fsl,imx8qxp-mipi-lvds-csr
+ - fsl,imx8qm-lvds-csr
+ - const: syscon
+ - const: simple-mfd
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: ipg
+
+patternProperties:
+ "^(ldb|phy|pxl2dpi)$":
+ type: object
+ description: The possible child devices of the CSR module.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: fsl,imx8qxp-mipi-lvds-csr
+ then:
+ required:
+ - pxl2dpi
+ - ldb
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: fsl,imx8qm-lvds-csr
+ then:
+ required:
+ - phy
+ - ldb
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8-lpcg.h>
+ #include <dt-bindings/firmware/imx/rsrc.h>
+ mipi_lvds_0_csr: syscon at 56221000 {
+ compatible = "fsl,imx8qxp-mipi-lvds-csr", "syscon", "simple-mfd";
+ reg = <0x56221000 0x1000>;
+ clocks = <&mipi_lvds_0_di_mipi_lvds_regs_lpcg IMX_LPCG_CLK_4>;
+ clock-names = "ipg";
+
+ mipi_lvds_0_pxl2dpi: pxl2dpi {
+ compatible = "fsl,imx8qxp-pxl2dpi";
+ fsl,sc-resource = <IMX_SC_R_MIPI_0>;
+ power-domains = <&pd IMX_SC_R_MIPI_0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ mipi_lvds_0_pxl2dpi_dc0_pixel_link0: endpoint at 0 {
+ reg = <0>;
+ remote-endpoint = <&dc0_pixel_link0_mipi_lvds_0_pxl2dpi>;
+ };
+
+ mipi_lvds_0_pxl2dpi_dc0_pixel_link1: endpoint at 1 {
+ reg = <1>;
+ remote-endpoint = <&dc0_pixel_link1_mipi_lvds_0_pxl2dpi>;
+ };
+ };
+
+ port at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint at 0 {
+ reg = <0>;
+ remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>;
+ };
+
+ mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint at 1 {
+ reg = <1>;
+ remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>;
+ };
+ };
+ };
+ };
+
+ mipi_lvds_0_ldb: ldb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx8qxp-ldb";
+ clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>,
+ <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>;
+ clock-names = "pixel", "bypass";
+ power-domains = <&pd IMX_SC_R_LVDS_0>;
+
+ channel at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ phys = <&mipi_lvds_0_phy>;
+ phy-names = "lvds_phy";
+
+ port at 0 {
+ reg = <0>;
+
+ mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint {
+ remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+
+ /* ... */
+ };
+ };
+
+ channel at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ phys = <&mipi_lvds_0_phy>;
+ phy-names = "lvds_phy";
+
+ port at 0 {
+ reg = <0>;
+
+ mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint {
+ remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+
+ /* ... */
+ };
+ };
+ };
+ };
+
+ mipi_lvds_0_phy: phy at 56228300 {
+ compatible = "fsl,imx8qxp-mipi-dphy";
+ reg = <0x56228300 0x100>;
+ clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_PHY>;
+ clock-names = "phy_ref";
+ #phy-cells = <0>;
+ fsl,syscon = <&mipi_lvds_0_csr>;
+ power-domains = <&pd IMX_SC_R_MIPI_0>;
+ };
--
2.7.4
More information about the linux-arm-kernel
mailing list