[PATCH 3/3] PCI: imx: clear vreg bypass when pcie vph voltage is 3v3
Richard Zhu
hongxing.zhu at nxp.com
Fri Mar 19 08:24:07 GMT 2021
Both 1.8v and 3.3v power supplies can be feeded to i.MX8MQ PCIe PHY.
In default, the PCIE_VPH voltage is suggested to be 1.8v refer to data
sheet. When PCIE_VPH is supplied by 3.3v in the HW schematic design,
the VREG_BYPASS bits of GPR registers should be cleared from default
value 1b'1 to 1b'0.
Signed-off-by: Richard Zhu <hongxing.zhu at nxp.com>
---
drivers/pci/controller/dwc/pci-imx6.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 853ea8e82952..c35d5511b55b 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -37,6 +37,7 @@
#define IMX8MQ_GPR_PCIE_REF_USE_PAD BIT(9)
#define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN BIT(10)
#define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE BIT(11)
+#define IMX8MQ_GPR_PCIE_VREG_BYPASS BIT(12)
#define IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE GENMASK(11, 8)
#define IMX8MQ_PCIE2_BASE_ADDR 0x33c00000
@@ -611,6 +612,10 @@ static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie)
static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
{
+ struct dw_pcie *pci = imx6_pcie->pci;
+ struct device *dev = pci->dev;
+ struct device_node *node = dev->of_node;
+
switch (imx6_pcie->drvdata->variant) {
case IMX8MQ:
/*
@@ -621,6 +626,16 @@ static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
imx6_pcie_grp_offset(imx6_pcie),
IMX8MQ_GPR_PCIE_REF_USE_PAD,
IMX8MQ_GPR_PCIE_REF_USE_PAD);
+ /*
+ * Regarding to the datasheet, the PCIE_VPH is suggested
+ * to be 1.8V. If the PCIE_VPH is supplied by 3.3V, the
+ * VREG_BYPASS should be cleared to zero.
+ */
+ if (of_property_read_bool(node, "pcie-vph-3v3"))
+ regmap_update_bits(imx6_pcie->iomuxc_gpr,
+ imx6_pcie_grp_offset(imx6_pcie),
+ IMX8MQ_GPR_PCIE_VREG_BYPASS,
+ 0);
break;
case IMX7D:
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
--
2.17.1
More information about the linux-arm-kernel
mailing list