[PATCH v2 0/4] enable flexspi support on imx8mp

[Heiko Schocher]

Hello Shawn,

On 15.03.21 07:47, Shawn Guo wrote:
> On Tue, Mar 09, 2021 at 06:31:12AM +0100, Heiko Schocher wrote:
>>
>> This series enables support for the SPI NOR on the
>> imx8mp based phyboard-pollux-rdk board.
>>
>> Patches new in v2:
>> "spi: fspi: enable fspi driver for on imx8mp"
>> which adds own compatible entry for imx8mp
>>
>> and seperate in own patch the documentation entry in
>> patch "dt-bindings: spi: add compatible entry for imx8mp in FlexSPI controller"
>> as checkpatch says:
>>
>> warning: DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst
>>
>>
>> Changes in v2:
>> - work in comments from Marco
>>   add own compatible entry for imx8mp
>> - work in comments from Marco
>>   - add own compatible entry "nxp,imx8mp-fspi"
>>   - reworked order of properties as Marco mentioned
>> - work in comments from Marco and Teresa
>>   - rename node into "'som_flash: flash at 0 { }"
>>   - compatible is now first entry
>>   - removed #size-cells and #address-cells
>>     as no child node. If bootloader adds them bootloader
>>     can add them too.
>>
>> Heiko Schocher (4):
>>   spi: fspi: enable fspi driver for on imx8mp
>>   dt-bindings: spi: add compatible entry for imx8mp in FlexSPI
>>     controller
>>   arm64: dts: imx8mp: add flexspi node
>>   arm64: imx8mp: imx8mp-phycore-som enable spi nor
> 
> Two DTS patch look good.  Ping me when driver and bindings changes are
> accepted.

Thanks!

Hmm.. I have not splitted this series into 2 series... should I do
this now?

bye,
Heiko
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52   Fax: +49-8142-66989-80   Email: hs at denx.de