[v6 2/2] arm64: dts: mediatek: Correct UART0 bus clock of MT8192

Chun-Jie Chen chun-jie.chen at mediatek.com
Thu Jul 29 19:43:23 PDT 2021


On Wed, 2021-07-28 at 14:14 +0800, Ikjoon Jang wrote:
> Hi,
> 
> On Tue, Jul 27, 2021 at 10:43 AM Chun-Jie Chen
> <chun-jie.chen at mediatek.com> wrote:
> > 
> > infra_uart0 clock is the real one what uart0 uses as bus clock.
> > 
> > Signed-off-by: Weiyi Lu <weiyi.lu at mediatek.com>
> > Signed-off-by: Chun-Jie Chen <chun-jie.chen at mediatek.com>
> > ---
> >  arch/arm64/boot/dts/mediatek/mt8192.dtsi | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> > b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> > index c7c7d4e017ae..9810f1d441da 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> > @@ -327,7 +327,7 @@
> >                                      "mediatek,mt6577-uart";
> >                         reg = <0 0x11002000 0 0x1000>;
> >                         interrupts = <GIC_SPI 109
> > IRQ_TYPE_LEVEL_HIGH 0>;
> > -                       clocks = <&clk26m>, <&clk26m>;
> > +                       clocks = <&clk26m>, <&infracfg
> > CLK_INFRA_UART0>;
> >                         clock-names = "baud", "bus";
> >                         status = "disabled";
> >                 };
> 
> There're many other nodes still having only clk26m. Will you update
> them too?
> 

Others will be updated by IP owner.

Best Regards,
Chun-Jie

> > --
> > 2.18.0
> > _______________________________________________
> > Linux-mediatek mailing list
> > Linux-mediatek at lists.infradead.org
> > 
https://urldefense.com/v3/__http://lists.infradead.org/mailman/listinfo/linux-mediatek__;!!CTRNKA9wMg0ARbw!1bIz6X2EiFbigCImzQmbqtezIFfl1LRBuPOYTqBdl5wfx8b-zp0zQP68R7RhaIcAAXXF$
> >  


More information about the linux-arm-kernel mailing list