[v6 2/2] arm64: dts: mediatek: Correct UART0 bus clock of MT8192

[Ikjoon Jang]

Hi,

On Tue, Jul 27, 2021 at 10:43 AM Chun-Jie Chen
<chun-jie.chen at mediatek.com> wrote:
>
> infra_uart0 clock is the real one what uart0 uses as bus clock.
>
> Signed-off-by: Weiyi Lu <weiyi.lu at mediatek.com>
> Signed-off-by: Chun-Jie Chen <chun-jie.chen at mediatek.com>
> ---
>  arch/arm64/boot/dts/mediatek/mt8192.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> index c7c7d4e017ae..9810f1d441da 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> @@ -327,7 +327,7 @@
>                                      "mediatek,mt6577-uart";
>                         reg = <0 0x11002000 0 0x1000>;
>                         interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>;
> -                       clocks = <&clk26m>, <&clk26m>;
> +                       clocks = <&clk26m>, <&infracfg CLK_INFRA_UART0>;
>                         clock-names = "baud", "bus";
>                         status = "disabled";
>                 };

There're many other nodes still having only clk26m. Will you update them too?

> --
> 2.18.0
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek